Questions tagged [arcgis-pro]

Use when your question is about one of the versions of the ArcGIS Pro application of ArcGIS Desktop

Filter by
Sorted by
Tagged with
0 votes
0 answers
6 views

List layer by data type in python window, eg: Layer == Polyline or Layer == Point

I am trying to locate features along routes for polyline and point features in a map. SThe locate features along routes tool requires two separate parameters; one for polyline and one for point ...
0 votes
0 answers
7 views

Using different Raster field when is not "Field" parameter for "input value raster" with arcpy.sa.ZonalHistogram

I want to get the Histogram of a Raster using the "Value" field in the raster attribute table. The "feature zone data" is a shapefile and the "Input Value Raster" a 32Bit ...
0 votes
0 answers
12 views

Creating optimal path between two spaces with point features in ArcGIS Pro

For my masters thesis I have mapped out all the green roofs in a city and I am trying to see if they can be used to connect two habitats. The two habitats are on opposite sides of the city and the ...
1 vote
1 answer
14 views

Set user input as path for saving Python toolbox results

I created a Python toolbox to run in ArcGIS Pro 3.0. I wish to save toolbox results in another geodatabase than the one by default, which contains input data. This toolbox will be run by several users ...
0 votes
1 answer
11 views

ModelBuilder for Route Network Analysis not finding Add Locations' Input Data

I'm building a model to measure distances (miles) and drive time (minutes) accumulated between predetermined origin and destination points. I already have this workflow down manually, but want to turn ...
0 votes
0 answers
19 views

Classification of raster using raster calculator in ArcGIS Pro

I have multiple images of LST which I need to classify into various classes based on class ranges, given below. T is LST raster Very cold temperature/Very Low T ≤ Tmean − 1.5std Cold temperature/...
1 vote
1 answer
16 views

Seeking tool for splitting lines with lines using ArcGIS Pro

I am using ArcGIS Pro 2.8 and would like to split some lines into segments using as a reference another lines layer (lines are not overlapping). I have this option on QGIS 3.10.3 but the tool still ...
0 votes
1 answer
44 views

Substracting rasters with a "buffer" to ignore slight offset?

I would like your help to understand my problem and formulate the appropriate question about it. I have two maps of the same place at two different years, one from 1900, other from 1957 (British ...
0 votes
1 answer
336 views

Multidimensional File to allow for pixel values across time series

I have a composite of SAR (28 images in a time series) data and I am trying to get the values of each pixel for the whole time series. I am looking at the coefficient of variation and trying to ...
1 vote
1 answer
23 views

Creating overlays and calculating area of intersect

I'm currently mapping for deforestation and species risk from palm oil plantations. I'm trying to calculate the area of intersect between the individual species and p-oil plantations and deforestation ...
0 votes
3 answers
34 views

Calculating the edge pixels within a fishnet

I have a raster with three land cover classes. For a fishnet grid cell, I want to calculate how many pixels (in %) are "edge pixels" (pixels from different land classes that touch). E.g., if ...
0 votes
1 answer
15 views

How to implement fuzzy join on ArcGIS Pro?

I need to join a table to a shapefile based on the names of the items. Problem is, the items are regional names translated in English from Chinese and sometimes the names don't match (e.g. a 'sh' in ...
0 votes
0 answers
16 views

ArcGIS Pro calculations combining joined and zonal statistics tables

I have calculated the area of intersect/sum of intersect of rasters using zonal statistics by using province ID as a zone field. I now want to divide that summed data for each province, by the total ...
0 votes
1 answer
18 views

Geoprocess generates a standalone table for layers, what is the correct parameter setting for my ArcToolbox?

I have a toolbox that is executing locate features along routes for a number of layers in a map. For each iteration of the locate features along routes I am expecting a stand alone table for each of ...
0 votes
0 answers
19 views

Migrating ArcGIS Pro project files to geodatabase without losing data

I have some projects going on with ArcGIS Pro but I saved my files in a random folder or different folders and then dragged and dropped. Now I'd like to put everything into the geodatabase for each ...
0 votes
0 answers
15 views

Using selection from multivalue input to perform clip with ArcPy

I am trying to build a script tool for my job that takes any vector feature (roads, rails, land cover, water polygons etc) and clips it to selected geocells. The geocells are one feature with a field (...
1 vote
1 answer
26 views

Domains visible in ArcGIS Pro but not ArcMap

Some users have reported an error when attempting to copy and paste feature classes from an enterprise geodatabase (See Image #1). After looking at the domains in the geodatabase, we see that the ...
0 votes
1 answer
24 views

Filter raster data by year

I need exclude a number of years from a deforestation raster layer. I have 2000-2019 deforestation data and I only require 2011-2015 data for my project. I have tried using raster calculator, but each ...
1 vote
0 answers
9 views

Count how much area of one layer feature are within another feature polygon

I am trying to count what percentage or area covers features from one layer my default layer - (usually polygon). And write these result into separate fields inside atribute table of my default layer (...
1 vote
0 answers
33 views
+50

Areal Interpolation polygon to polygon using ArcGIS Pro

I am using ArcGIS Pro 3.0.0. I have two multipolygons and I would like to interpolate the values of one polygon to the other. I found the Areal Interpolation tool which does exactly that. One of ...
7 votes
4 answers
8k views

Using one map, multiple layouts, each with different layers in ArcGIS Pro?

I was wondering whether it's possible in ArcGIS Pro to create multiple layouts for one map, which contains different layers (e.g. aerial photo, buildings and soiltype). After prepping the map in 'map ...
2 votes
2 answers
26 views

ArcGIS Pro Active Map Metadata Object is Read-only when accessing via ArcPy

I'm using ArcPy to get the current aprx, active map, then to create an empty metadata object, and populate it with values from a fGDB table, but I cant copy and save it back to the read only map ...
0 votes
1 answer
28 views

Using ArcPy to add layer to map

I am having trouble adding my result to the current map using ArcPy. I keep getting this error problem, "ValueError." Here is my script: Result = arcpy.analysis.Clip('FeatureClipped','...
1 vote
1 answer
34 views

Using ArcPy for custom toolbox

I am trying to create a toolbox that will execute 'Locate Features Along Routes' in multiple layers and in two active maps in ArcGIS Pro. One map contains linear features to be located, the other ...
0 votes
0 answers
15 views

Retaining primary symbology in gdb file in ArcGIS Pro

After importing my feature class into a gdb file for sharing, its primary symbology was changed back to default (i.e single symbol). Is there a way to retain the intended primary symbology (i.e unique ...
3 votes
2 answers
86 views

Count points in polygons per group in ArcGIS Pro

I know that there are many similar topics around and I think I have checked them all but they all refer to different settings or aims. My case is simple: I have polygons: building_blocks points: ...
0 votes
0 answers
28 views

Raster function with condtional function

I have two raster layers and a function sand.tif, clay.tif and def soiltexturalclass(sand,clay):. The function is a conditional function which can be viewed here. The goal is to create an output ...
0 votes
0 answers
18 views

Layer Blending in ArcGIS Pro and Publishing to service

I've been working on a service to publish and have made a very clean map using layer blending. However, when publishing as a Web Map, a web layer WMS and a Map image, it removes the blending of my ...
1 vote
0 answers
18 views

Creating cost distance raster and cost path

I am new to GIS and currently working on some exercises as part of a study course. The task is to determine a well fitting path for a new highway. The basic input data are: Landuse (Forest, Buildings)...
0 votes
1 answer
58 views

What does "del aprx" at the end of Python code do?

More of a general/theoretical question: Often times a Python code for ArcGIS Pro requires the statement "del aprx" at the very end, what does this statement do and is it necessary? I ...
0 votes
0 answers
88 views

Failed to package using ArcGIS Pro

I am using ArcGIS Pro. I am trying to share my project package. When I go to the package project tool, I type in my summary and tags, and then I analyze it. I get no errors from the analysis. When I ...
3 votes
2 answers
79 views

Changing metadata using ArcPy of ArcGIS Pro?

Is there any ArcPy function or classes which allow us to change map and layout metadata within ArcGIS Pro?
0 votes
1 answer
9 views

Using Arcade to label polylines with X coordinates of last vertices in ArcGIS Pro

I am using ArcGIS Pro 3.0.0 and a File Geodatabase. I have a requirement to use Arcade for configuring some Attribute Rules related to the geometry of the features involved which has led me to realize ...
0 votes
1 answer
178 views

Finding percentage of raster contained in shapefile using ArcGIS Pro

Using ArcGIS Pro, I have a raster that shows tree height and a shapefile that contain parcels of land. I am trying to find out the percentage of the raster that intersects with the shapefile for each ...
1 vote
1 answer
23 views

Using Attribute Rules to Pull in Attribution from Another Feature Class

I could use some assistance creating a calculation that just simply pulls attribution from a field in one feature class, and populates the edited result into another feature class's table. For ...
1 vote
1 answer
103 views

Symbol Rotation for all features along line in ArcGIS Pro

I have a waterline with accesories set along the pipes and I would like to rotate the symbols towards the pipe direction (Paralel, perpendicular, etc Depending on the fitting or device type). For that,...
1 vote
1 answer
283 views

ArcGIS Pro add attribute rule (Arcade expression)

I am trying to create an Arcade expression in add attribute rule which will auto populate the attribute field (DPA_GROUP) in my points layer (as I create new point features) from the underlying ...
1 vote
3 answers
1k views

Multiple values for condition in IIF statement in Arcade

I am trying to create an immediate calculation attribute rule for a feature class in ArcGIS Pro (that I hope carries over when published as a feature service on AGOL). I understand the basic syntax: ...
1 vote
0 answers
303 views

ArcGIS Pro attribute rule fails when collecting from an online map in Field Maps

I am using ArcGIS Field Maps to collect building inspection records to a standalone table by tapping on a feature in a related building layer. (See Inspect—Add a related report.) The inspection table ...
1 vote
1 answer
366 views

Dynamic query to show XY coordinates as values in columns (FGDB)

I have a point FC in a file geodatabase. I want to create a feature layer on the FC that has columns that show the X & Y coordinates of the geometry. The values in the query would be dynamic; they ...
0 votes
0 answers
12 views

Auto-calculating Geodetic Length using Geographic Coordinate System other than WGS 1984

At How to show geodatabase calculated area and length in meters from WGS84 FC?  (from 2018) it was said that "a little further ahead it will be possible to use Arcade expression (in Pro, not ...
0 votes
1 answer
24 views

DEM layer in layout is not exporting [closed]

I'm using the topobathy DEM layer from the living Atlas and when I try to export the layer (alone or with other features) it produces a blank PNG. I only really have this problem when I have zoomed ...
2 votes
2 answers
18 views

Zooming using getLayerExtent property of MapFrame not always zooming using ArcPy with ArcGIS Pro

To see this problem: Start ArcGIS Pro 3.0.0 (or any version you wish to test) Create a new project using the Map template, call it TestProject in C:\temp and tick the checkbox to make a new folder ...
3 votes
1 answer
345 views

Exporting geodatabase using R-Bridge with ArcGIS Pro

I am trying to export a spatial points data frame as a Arc geodatabase using arc.write function in the R-bridge (arcgisbinding) in R. I'm working in R v3.6.1, ArcGIS Pro v2.4.0 Advanced License, and ...
1 vote
4 answers
173 views

How do I adjust a layout's zoom level before exportToPNG?

I'm using ArcGIS Pro, and ArcPy. I have a file geodatabase with 1,000 unique polygons. What I would like to do is export each feature as a PNG image. I'm expecting to have 1,000 image files when it's ...
1 vote
0 answers
18 views

Using Parse Path as Variable in Calculate Field with ModelBuilder of ArcGIS Pro

I am trying to use the PPName field in Calculate Field, but it errors each time. I had added %PPName% in the calculate field code box for Arcade. Is there something else I need to do to be able to ...
0 votes
1 answer
511 views

ArcGIS Pro - Open .aprx files to edit file paths

Two times a year a positional check of railway assets is performed in ArcGIS Pro for 21 different areas by receiving updated data. Every half a year in each area new data is automatically prepared in ...
1 vote
1 answer
678 views

Importing SketchUp (skp) file to ArcGIS Pro

I've downloaded some 3D data from 3dwarehouse.sketchup.com Now, I would like to open it in ArcGIS Pro but I cannot find how can to do it. How can I do this?
1 vote
3 answers
39 views

Calculating percent of polygon within another polygon using ArcGIS Pro

I have two polygon layers, say A (multipolygon) and B (multipolygon), and I want to find the percent of A in B. For example, the percent of one of the A polygons with ID 1 will be stored in one of the ...
4 votes
2 answers
6k views

Adding raster image to ArcGis Pro?

It is said in manual, that You can add pictures to your layout. The insert picture command can be found on the Insert tab in the Graphics group. Unfortunately, I don't have any Graphics group in ...

1
2 3 4 5
55