Questions tagged [atlas]
A functionality of the QGIS Print Composer.to generate series of maps with a common layout and dynamic content.
382
questions
0
votes
1answer
31 views
QGIS List of two intersecting layers features inside Atlas
Learning to use aggregates. Need to know how I can list several streets inside my atlas with the condition that layer 1 (not controlling layer, only visualised and used for statistical purposes) and ...
2
votes
2answers
39 views
QGIS filter Atlas with intersecting geometries
At Show only features within current Atlas feature I learned a valuable way of using Atlas. I need to move it a step further but lack the skill.
How do I filter the atlas using geometry of other ...
0
votes
0answers
9 views
Adding more than one layers in Coverage layer in Atlas
Can more than one cover layer can be added to the Atlas from the Print Composer?
I have a layer of polygons as a cover layer and it recognizes the different elements that make up this layer but now I ...
7
votes
1answer
116 views
QGIS: label only if more than 1 polygon visible in map extent?
I am working on a series of maps in QGIS. I am creating an atlas, not generated on a grid of regular size, but instead based on polygon features of variable size. Everything working well so far, ...
5
votes
2answers
106 views
Turning labels off within polygon in QGIS Atlas
Is there a setting to turn off labels within a polygon in an Atlas?
In the example below I don't want labels to show in the grey inset area.
I have tried the new clipping functionality
All the label ...
0
votes
0answers
25 views
In an atlas is it possible to cover the features that are in other AOI's and turn off labels? [duplicate]
In a map series we have 1:15k for the regional map and 1:5k for a town map within it. When the regional map is printed I want to cover the section with the town and label it with the index number as ...
6
votes
1answer
69 views
Move inset map in QGIS based on defined anchor point
In an Atlas the content of some maps are best suited for the inset to be on the Left bottom, on others it's the Right bottom of the map. If we add the xy of this point to the table that is used to ...
1
vote
1answer
43 views
In QGIS Atlas how can we get the scale bar to a fixed width that works with different scales?
Following on from Setting Atlas scale and scale bar for each map to round number using QGIS
When we set the scale bar to work correctly at one scale and then the atlas cycles through other scales you ...
3
votes
1answer
84 views
Atlas print-out to one-page pdf
I have a layer with 135 polygons and i have created an atlas that printout all 135 polygons in one PDF with 135 pages and I can also print out 135 PDF if I use the "Export to PDF" button and ...
0
votes
0answers
11 views
Export several layouts as an atlas
I have a series of layouts, all of them from the same area of study but each one representing different attributes.
My question is if I could create a way to export the series of layouts (each ...
4
votes
2answers
71 views
Setting Atlas scale and scale bar for each map to round number using QGIS
My AOI table looks like
I have the following settings in the map frame.
Notice the scale is not a round value.
I have tried to change the value for 'Margin around feature' to 0 but this doesn't ...
1
vote
1answer
33 views
Connecting layout text boxes to item before it in QGIS 3
I have an atlas layout in QGIS 3.16 where input data can vary in character length. Therefore I made a override of box height based on text length. The problem I ran into, is that if the text is longer ...
1
vote
0answers
15 views
Setting symbology visibility to dynamic scale which changes based on specific maps in atlas composer
I have a project where I wish to have four pages of maps for each region, with set symbology for each map level. However each region has a different scale that im working at.
for example region A the ...
2
votes
0answers
27 views
Performing (semi)automatic export of several maps at once using QGIS
I am trying to do automatic export of several maps on weekly basis. There will be input data for every day of the week and on the end of the week I want to export 7 maps.
I tried the Temporal tool but ...
8
votes
1answer
90 views
Access report/atlas page from feature in layer (QGIS)
In QGIS 3.22. I've created an atlas layout from a polygon shapefile layer. What I'd like to do is be able to access the atlas page for a given feature without having to open the layout manager. Some ...
2
votes
2answers
49 views
Independently editable report/atlas pages using QGIS
In QGIS 3.16. I've created an atlas layout based on a polygon layer. There is one page per feature, with various objects in it including maps, labels, html objects, and images for that feature.
What ...
2
votes
0answers
33 views
Is there a way to change the shapefile being used in exportPdf() function?
I'm using this function to export layouts and I want to know if it's possible to switch the shapefiles(.shp) being used in the Atlas project for other ones before the function actually exports the ...
7
votes
1answer
166 views
Displaying only attributes not zero in QGIS Atlas text box
I'm working with QGIS 3.16 Hannover. I've got a polygon shapefile layer with a 1x1 km grid. Each cell (feature) has 46 attributes corresponding to the percentage of 46 habitat types present in that ...
2
votes
1answer
36 views
QGIS Report builder: Are there atlas-like syntaxes (like "@atlas_pagename" etc)?
I'm just starting to use the Report-Feature in QGIS 3.20, with which I want to combine both single maps and altas-like mapsets in one step.
In the Atlas-Layout-Feature, I am able to use functions like ...
2
votes
1answer
34 views
"Eval Error" when selectively rendering raster layers in QGIS Atlas
Using the Atlas feature in the QGIS print composer, it is possible to use rule-based symbology to show/hide components of vector layers as required or defined by the Atlas?
I have multiple pages, ...
0
votes
1answer
39 views
Plotting large map into several smaller A4
I am using QGIS. I have a big map and licence for exploration. How can I split map with layer bounds (red line polygon-licence) in a few A4 which one will continue to another one etc. in scale 1:5000?
2
votes
2answers
42 views
QGIS Atlas preview OK, but export as images results in blank tiles
I have a QGIS project with two ArcGIS Image Server layers that contain orthophotos (from 2018 and 2021 respectively). The project has a print layout that is controlled by an Atlas. When I turn on the ...
1
vote
0answers
35 views
Rotation of raster image in atlas using QGIS [closed]
I am currently dealing with a mind-numbing problem. I am creating an atlas that has photos as a part of it. The images are loaded through an attribute with relative link. Everything loads just fine ...
5
votes
2answers
112 views
Create (autogenerate) report in QGIS, with a map for each type of feature
Lets say I have a layer called trees, with an attribute 'species'. The set of species in my dataset is quite limited, lets say: beech, birch, oak and elm.
I want to create a report with a page for ...
1
vote
0answers
35 views
Displaying multiple pictures on the same page in a QGIS3x Report
I am reporting on a project which has a series of transects around the perimeter of the site. For each transect I have prepared a detail plan and cross-section. Each transect is associated with a ...
1
vote
0answers
22 views
QGIS Dynamic Virtual Layer as layer coverage of Atlas
Trying to optimize QGIS for my work, I tried to setup a dynamic virtual layer as a layer coverage of my atlas composition, using DB Manager. I join a vector file to a txt file to use one polygon as my ...
0
votes
0answers
33 views
QGIS Print Composer Multiple Atlas for different Map views
Is it possible to have two different coverage layers in the QGIS 3.18 Print composer Atlas settings, that differing map windows follow?
I am creating a multi-panel chart and would like 3 of my 4 ...
5
votes
2answers
90 views
More than one coverage layers in QGIS atlas
In QGIS how can I have more then one coverage layer in Atlas?
As is shown in the image below I have multiple city blocks (in a layer), that contain multiple land lots (in a different layer).
I wish to ...
7
votes
1answer
257 views
Using two different maps on one atlas page
I can generate an atlas for 26 different map extents (numbered 1-26) and put them on 26 different pages. I want to put two different maps from the series on the one page i.e. map extents 1 + 2 on page ...
1
vote
2answers
94 views
QGIS 'Powers of Ten' - How to output a series of maps with x1, x10, x100 scale?
I'm pretty new to QGIS. I'm trying to output a series of maps that are at the scale of 10km, 100km, 1000km. I thought this would be a really easy task but for some reason really struggling with it.
I ...
0
votes
2answers
85 views
Print number of features as text in QGIS Print Composer (Atlas generator)
I have made an atlas in QGIS 3.6.3 (Noosa) of plant species distributions in two periods of time. Black dots represent distribution in the period 2000-2019 and gray squares represent distribution in ...
0
votes
1answer
35 views
Managing the style in the Atlas in QGIS
Is there a setting in Atlas to manage the style of the printed item?
I use Atlas in a network, each item is in the center of the image, but there are many items near this one and I need to highlight ...
2
votes
1answer
52 views
QGIS Map Atlas sub-region label names highlight
In QGIS Atlas, I can use $id = @atlas_featureid and $id <> @atlas_featureid to highlight the label names of my main region (Fig.1: more clear name in the AOI than the outside ones). How can we ...
1
vote
1answer
42 views
QGIS Atlas pages all exporting same extent
I am trying to export multiple map pages from QGIS using Atlas, I am used to doing this in ArcMap using Data Driven Pages so applying similar concepts to the Atlas but all the exported pages are ...
3
votes
2answers
142 views
Exporting multipages Atlas with predefined layout in one PDF file in QGIS 3.x
Exporting multipages Atlas with predefined layout in one PDF file in QGIS 3.x
I want to get a PDF export of my atlas in only one PDF File in QGIS 3.16. I've written the below code so far with the help ...
0
votes
0answers
61 views
QGIS Atlas not working in standalone Python script
I search to update maps with a standalone Python script on Linux. I use QGIS 3.18.3.
My problem, the beginRender() return false, so there are no atlas element. Anyone have idea?
My code :
from qgis....
3
votes
1answer
80 views
QGIS Atlas fit center map to another table
In QGIS Atlas, I manage two tables. One regarding buildings sector with its own geometry at sector level. The other regarding buildings. Both tables are related by sector code.
I need one map per ...
1
vote
1answer
84 views
Computation of a point location in QGIS
I created grids (A1, A2....,B1,B2,...etc.) in print layout (main properties-grids). I also use atlas. I display many points and I need to calculate location of every point within a page of atlas and a ...
2
votes
0answers
28 views
QGIS - page numbers in print layout [duplicate]
I use QGIS print layout to create atlas with many features.
I am tring to find a way to show page number left, right, up and down of atlas feature.
Is there any way to insert these page numbers to ...
2
votes
1answer
64 views
Setting a label color of zoom extent in QGIS
I set a frame color of zoom extent at print layout-properties-overview when I use atlas.
How can I set a label color of the number this particular zoom extent to be the same as zoom extent frame?
3
votes
1answer
65 views
QGIS overview map of atlas - setting a color
I have an overview map of atlas in atlas print layout. How can i set an automatic change of color for atlas map in overview map?
E.G. I have 600 atlas maps. In oveview map every atlas map is a polygon ...
0
votes
0answers
43 views
How can I make atlas zoom on different polygons?
I'm trying to create an atlas and my last step is to zoom in on each exported picture over the red polygon. Any suggestions?
1
vote
1answer
105 views
In QGIS Atlas how to get the index and the number of features grouped/filtered by an Attribute with expression?
Using a QGIS Expression in the Layout Editor, how can one return the count of features matching a particular attribute value for an atlas feature, for example, "AREAS_Area".
In this ...
3
votes
1answer
90 views
Check if other features besides atlas feature are displayed in the map
I am making an atlas in Print composer and I want to check if other features besides the atlas feature are present in the map. In the Print composer map below, the (current) atlas feature is Licab, ...
1
vote
1answer
37 views
Plugin to extract print layouts layer by layer
I need a plugin that lets me extract all the layers i have active in the file one by one as a print layout.
So when i activate the plugin it automatically gives me png files of every layer separately
...
0
votes
1answer
83 views
Is there a way on Atlas to put a Margin around feature but also use Predefined scales?
In QGIS, how can I put a margin around a feature but also use predefined scales in Atlas? Like an in-between of the two options. I have a feature that fits in the map but as you can see in the image ...
2
votes
1answer
64 views
In Atlas how can I put a margin around a feature but also use predefined scales
In QGIS, how can I put a margin around a feature but also use predefined scales in Atlas? I have a feature that fits in the map but very tightly, so I would like QGIS to use a smaller scale to better ...
1
vote
1answer
61 views
Use attribute of all filtered features of one layer as label in the Print composer
Is it possible to filter some features in one layer and use those filtered features as labels in the Print composer of another layer?
I am trying to make an atlas. I have two layers, one which has the ...
1
vote
1answer
153 views
QField and Atlas
I use QField for my field recording with photo documentation. The synchronization takes place via USB from tablet to PC, everything works without problems.
With my recording and the atlas function, I ...
0
votes
1answer
54 views
QGIS Atlas function [duplicate]
I try to make an atlas for a big map.
Is there the possibility to insert a textfield on the diffrent pages of the atlas pages to see wich name the neighbouring pages have?
