Questions tagged [band]
A layer in a raster dataset.
93
questions
1
vote
1answer
27 views
Transfer feature details from WMS to raster file
I need to export a WMS Map in a raster (QGIS) as I would like to do a zonal statistic after I need the WMS raster values. I can see them in the Identify results panel. The WMS has single Band color ...
0
votes
0answers
25 views
Assigning bands for cart classification
I am classifying Landsat 8 and Sentinel 1 in Google Earth Engine but the console tells me I do not have the required bands for classification even after assigning all the bands.
Attached a link to my ...
1
vote
1answer
85 views
Image dimensions in Google Earth Engine
How can one get image (band) width and height on the server side?
On the user side you do it with image.getInfo().bands[0].dimensions, following Extracting information from Google Earth Engine image ...
1
vote
1answer
65 views
Google Earth Engine: set band as property without reducing
I have a function that takes an ImageCollection and sets a mean value as a property for another ImageCollection.
var DHW = HS_SSTA_7d.map(function(im) {
var res = im.reduceRegion(...
1
vote
1answer
46 views
Performing complicated calculation on bands in Google Earth Engine
I'm trying to perform ANIR index calculation on my image collection. I'm having trouble writing the code in the right way. ANIR index formula is :
cos^-1[((a^2)+(b^2)+(c^2))/(2*a*b)]
(a2, b2 and c1, ...
0
votes
1answer
33 views
Getting band names using ArcPy in ArcGIS Desktop 10.x
How do I get a list of band names using ArcPy in ArcGIS Desktop 10.x?
In ArcGIS Pro, I can use Raster('myRaster').bandNames, but this is not an option in ArcGIS 10.x and I cannot seem to figure out ...
0
votes
1answer
28 views
Band Compositing
This is probably a trivial question, but is it possible to create band composites using bands of different resolutions (10m, and 20m)? I tried that and exported the resulting rasters to JPEG and it ...
1
vote
0answers
29 views
Rasterio doesn't display the differnet bands of image
I have one raster which has three different bands.
The two first bands look like this (in qgis):
and the third band looks like this ( missing values in some places:
The three bands sit on top of ...
1
vote
2answers
85 views
Batch NDVI calculation with PyQGIS
I'm trying to run an NDVI calculation on a set of raster layers. The approach is to adapt this QGIS 2.x code to run in GQIS 3.x. A far as I'm aware it's the "legendInterface" that's changed, ...
1
vote
1answer
75 views
FeatureCollection (Error) Image.reduceRegions: Group input must come after weighted inputs
I was trying to find the area of each block by category in the band. There is one band and it has 18 categories. The feature collection is a collection of blocks described uniquely by code_2011.
var ...
0
votes
1answer
259 views
Rename images of ImageCollection to add band name at the end on Google Earth Engine
Helllo everyone, I am trying to batch download an image collection using Rodrigo E. Principe's tool but I want to download each band seperately by image.select function.
When I download a single band, ...
0
votes
0answers
25 views
How build NDVI based on multi-bands on different files (one band - one file) in geoserver?
I am using a geoserver. I have several bands (b1, b2, b3..etc) I need to build NDVI based on them, for this I need to have access to each of the bands, but since they are in separate files, when I ...
1
vote
0answers
32 views
Accessing bands of a NetCDF by datetime in Python
I want to write each band as a separate file (after gdal.Translate operation). So I can directly address to each band by datetime, not by a number?
The second way, more sophisticated is to get all ...
0
votes
1answer
26 views
How to read a RasterBand as Dataset to use in gdal.Translate as source?
I need to translate each band of netcdf file to other format. How can I get raster.GetRasterBand() not as a band object, but as a dataset ot otherwise to use it in gdal.Translate(dst,src) as src?
0
votes
2answers
111 views
How to access Sentinel-2 L2A Scene Classification Layer (SCL) with GDAL
I have a Sentinel-2 L2A and was able to access it with:
In[1]:
image = gdal.Open(s2l2a_image.zip)
subdatasets = image.GetSubdatasets()
Out[1]:
[('SENTINEL2_L2A:/vsizip/s2l2a_image.zip/...
0
votes
1answer
136 views
Extracting band names of RasterLayer in R
I have a RasterLayer with 500 bands in R (I exported the raster as a single image in Google Earth Engine, which was originally an ImageCollection). I know you can extract the band you want to use by ...
1
vote
1answer
36 views
Band math doesn't work in GEE
I'm trying to calculate WDVI index but for some reason the computation failes and I don't find my mistake. The function works but all the pixels are 0.
var addWDVI = function(image) {
var red=image....
1
vote
1answer
50 views
Verifying that it is ok to use multiple band combinations as I create polygons for my supervised classification?
I am sorry if this is a naive question, but I am very new to remote sensing analysis.
I am conducting a supervised classification in Google Earth Engine. I want to verify that as I develop my ...
2
votes
2answers
68 views
Add two bands to image gives the bands the same name
I have a sentinel -1 image collection and I have a function that suppose to use focal median in order to apply speckle correction. Each image has 2 bands: VV and VH and the function I have suppose to ...
1
vote
1answer
47 views
Calculate number of pixels and more variables by classes in QGIS
I have one band raster that has 3 possible values: 1,2 or 3.
I want to calculate for this raster different variables, for example how many pixels we have for each values and also to do some band math ...
2
votes
1answer
83 views
How remove alpha band from *.sid
I've got a ImageMosaic (GeoServer) created from 4 band *.sid files. Images become transparent around the outer edges of *.sid files . When 4-th band is removed with gdal_translate -b 1 -b 2 -b 3 -of /...
0
votes
0answers
34 views
Exported GEE one band raster shows three bands in ArcGIS
I made a raster layer on google earth engine that only contain pixels have value higher than SAVI mean+1SD. I exported the raster layer as GeoTIFF and specified the raster as green colour. When I ...
1
vote
1answer
36 views
Error with select one band in image
I have code that suppose to calculte NDVI and then to cound the number of pixels in the raster that are higher than 0.3 There is part of the code where there is function that suppose to select the ...
0
votes
2answers
465 views
Processing images with file type .ntf [closed]
I am use to posting in Stack Overflow, but it seems this question is best geared towards the GIS Stack Exchange. I need to understand the .ntf file types for satellite images. I am in grad school and ...
3
votes
2answers
293 views
Merging two Landsat TIFF file of same band in QGIS 3.4
I've been wanting to merge two TIFF files of same band (this case it will be B1 in Landsat). I have followed tutorials which I came across online, but none of them seems to work. Generally, raster > ...
-1
votes
1answer
106 views
Add an NDVI band to NAIP imagery and then chart it (using Google Earth Engine)
I am attempting to calculate NDVI from NAIP imagery, add the NDVI band as an additional band to the NAIP imagery and then chart it.
I am easily able to calculate NDVI from NAIP imagery with the below ...
2
votes
0answers
35 views
Querying / seting up PostGIS (raster) table to efficiently get all bands at once?
I have created a PostGIS raster table from raster2psql. I have use cases where I might have bands sizes of 114 to 670 bands inside a raster (The number is consistent across a given dataset.)
My ...
0
votes
1answer
202 views
Batch changing of Raster Bands of Multiple Rasters in ArcGIS Desktop?
I have a ton of rasters in my ArcGIS project, each with 4 bands.
At the moment, I am changing the raster bands, one by one, for each file:
Red becomes Band 2
Green becomes Band 1
And I am setting ...
1
vote
1answer
714 views
Google Earth Engine band did not match any bands errord
According to the dataset, there should be a band named: total_precipitation_surface. However, when I try to get data from this band I get:
> Collection.first: Error in map(ID=2019061000F000): ...
1
vote
0answers
41 views
Earth Engine Image Collection Reduction Glitch
I am having a visual glitch when adding an image as a band to the map. The glitch consists of a vertical line which is not rendered at all. The more I zoom out of the map, the more this line increases ...
2
votes
1answer
156 views
QGIS 3.4 Modeler: Select a band of a raster layer for processing
As model input data I select a raster stack with three bands. The first processing tool just needs specific bands of this stack which I like to select in the input dialog.
I create a 'Raster Layer' ...
2
votes
1answer
2k views
Finding all the values within a band in google earth engine
I have an image composite which includes a day of year band. When I display the band using Map.addLayer and stretch by 100% in the Visualization Parameters I can see that the range of values is 151-...
0
votes
1answer
61 views
Exporting band data of a large number of points
I have a question regarding exporting a data from GEE.
I am new to coding and GEE. What I would like to achieve is export pixel band data of points a have managed to upload using Fusion Table.
Is is ...
2
votes
1answer
386 views
NDVI index based on QA bands for MCD43A4 , in GEE
I want to calculate the NDVI index based on the MODIS/006/MCD43A4 collection and based on quality bands, but as a new GEE user I have no idea If I am on the rght way to do this.
So far I have the ...
0
votes
0answers
90 views
Rasterise shapefile as 1 band (grayscale)
My code converts shapefiles to rasters.
I had first done this in colour, but now I need greyscale (1 band).
The code seems to create this for the first raster file, but the other raster files seem ...
3
votes
0answers
214 views
Usage of Custom Transparency band for elevation raster in QGIS 3
I would like to set a raster transparency to represent its elevation, so that the mountain tops are opaque and gradually become transparent toward their foot.
On the Layer Properties > Transparency ...
0
votes
0answers
66 views
How to remove unnecessary bands from .sid file (keeping file format)
An ImageMosaic layer created from .sid data containing 5 bands has black areas where data is missing and setting transparency parameter in GeoServer does not help as error appears:
Error rendering ...
0
votes
1answer
109 views
Map.addLayer automation
As in the Hillshade Example, I wanted to automate adding all Layer from one Image for visual inspection.
var band_names =Image.bandNames()
print(ee.String(band_names.get(0)))
for (var i = 0; i < ...
0
votes
1answer
269 views
.bandnames() as String
var bandname = ee.String(ee.ImageCollection.first().bandNames())
gets a print of:
using
ee.Image.regexpRename(bandname, new_name)
or using
var bandname = ee.String(bandname)
results in :
...
1
vote
1answer
1k views
Google Earth Engine, get a List of Bands
I want to Automate Band selection for all bands. Therefore a List of the Bands is needed. This didn´t work:
ee.List(image.get('bands'))
1
vote
1answer
450 views
Count pixels of different bands in MODIS
I need some help with my script in GEE. I’m working with a MODIS Terra Vegetation Continuous Fields Yearly (MOD44B.051 Terra Vegetation Continuous Fields Yearly Global 250m) and I’m trying to obtain ...
0
votes
2answers
227 views
NDVI from ENVI to Arcmap stretched value
I calculated NDVI in ENVI by band math. When I drag and drop the image in ArcMap it becomes a black image with stretched value =0 for all pixels. However, by identity clicking each pixel has a value ...
2
votes
2answers
511 views
Are Landsat 8 data from ESPA corrected and calibrated?
I am trying to figure out Landsat 8 data corrections and calibrations. Actually, I don't really know how this can be done and which data needs what kind of correction and calibration for further ...
0
votes
0answers
519 views
Landsat 8 bands of 432 looks too dark in ArcGIS
I have created a composite map using the combination of Landsat 8 bands of 4, 3 and 2 (I read this combination gives true natural color) to see the scene in true color in ArcGIS, but it looks too dark....
3
votes
1answer
246 views
GeoTools extract band
I have a tiff image with 4 bands (Red, Green, Blue and Infrared) and I need to extract two of them.
I want to input one image and split it and make two images.
I want to do it with GeoTools since I ...
0
votes
2answers
168 views
band name for landsat surface reflectance product
I'm looking for any link/documentation where the centre wavelengths of Landsat surface reflectance product are stated/written (i.e. the value for each centre band). Specifically, I wanted to be sure ...
1
vote
0answers
186 views
Difference in the maximum values of a Raster band when using numpy array and when using gdal function directly
import numpy as np
from gdalconst import*
band = 'band1.tif'
band1_12 = dataset1_12.GetRasterBand(1)
max = band1_12.GetMaximum()
print(max) #this gives 2425.0
data1 = np.array(band1_12.ReadAsArray())...
6
votes
2answers
669 views
Why is a normalized parameter involving the Green band and Red band not used for Vegetation determination?
The green region reflects solar energy sufficiently well. So does the NIR region, much more than the green region, indeed. However, reflection in Green region is based on the chlorophyll concentration,...
1
vote
1answer
206 views
Batch Processing single band raster to create multi spectral images using arcpy.CompositeBands_management?
I am kind of new to python but I am trying to batch process single band raster images to create multispectral imageries using arcpy Composite Bands. I have 24 single band rasters (Bands 1 - 3 ) all ...
6
votes
1answer
1k views
Viewing bands of landsat 8 images in QGIS for NDVI calculation?
I am trying to calculate NDVI values for sites I sampled with landsat 8 imagery.
The equation is simple : NDVI = (NIR band - Red band)/(NIR band + Red Band)
Now I understand that landsat 8 images ...
