Questions tagged [batch]

To group or to do something in a group as opposed to doing it individually

Filter by
Sorted by
Tagged with
0
votes
1answer
10 views

Batch-create Mapbox tilesets

I'm trying to put together a command on tippecanoe that will batch-create tilesets that upload as individual layers. All of the layers are keyed to the same spatial boundary, which is in a geojson ...
1
vote
1answer
24 views

QGIS - Zonal Statistics Batch - empty

after using zonal statistics by hand which works perfectly fine. I want to use it in Batch-mode to extract Mean/SD/Median for different rasters in the same polygon. I can not select a rasterband, ...
1
vote
0answers
47 views

Batch export of layers as individual PNG files in QGIS 3.4?

I have hundreds of layers. I'd like to be able export each one as a PNG. I can do this by selecting one, and going to project, export map to image, calculate from layer -> select layer -> save. Is ...
2
votes
0answers
25 views

Batch process aligning multiple rasters in QGIS

I would like to know if there´s a way to run a batch process that consists in aligning (changing cell size from 10 to 20 in Sentinel 2 imagery) in QGIS 3.4? I need to resample band #8 (resolution 10m)...
1
vote
0answers
21 views

Log Scale Contouring in ArcMap?

I have a shapefile of concentration values, they range from 0 7000. I want to either contour or display these in log scale (0.1, 1, 10, 100 and 1000) what is the best way of doing this? I have about ...
0
votes
1answer
32 views

Python batch script to delete Attributes

I currently have a script that will select and delete all the values less than 0.1 in a column. The script below works, however it specifies a specific .shp, I want to batch this so it runs through ...
0
votes
0answers
21 views

Batch download from ArcGIS Feature Server in QGIS?

I have looked into the PyQGIS Developer's cookbook but can't find an example doing the captioned. Is the API of the ArcGisFeatureServer in QGIS available?
1
vote
0answers
22 views

Why in ArcMap, batch processing with custom model, gives each output identical name? [duplicate]

In ArcMap 10.7, I'm trying to use batch processing on a custom model. The problem I'm having as seen from the picture below, is that the output files are given the name of the first output file, even ...
1
vote
0answers
28 views

Avoiding greyed-out rows in ArcGIS batch processing?

I'm using the batch processing ability in ArcMap 10.6.1 to run a ModelBuilder tool using Zonal Statistics As Table and Add Fields on a bunch of rasters. When I try to specify where to save the output ...
2
votes
1answer
48 views

Python error when batching a Graphical Modeler script [QGIS 3.4.9]

I have a very simple Model to convert a table in points and to extract some features by their attributes. I can run it without any problem, except if I do it as a batching process. I received this ...
2
votes
0answers
26 views

Combining Several “Blocks” in ModelBuilder?

I have a model in three blocks. Block 1 iterates through feature classes in a DB clips them based on an extent boundary and stores into a folder. Block 2 takes input folder and check through ...
2
votes
1answer
40 views

Batch reading features from many Geodatabases in R

I would like to learn to batch import from many geodatabases at once and merge the files together into a new unified shapefile. All of the GDBs and Features have a similar name and file structure. For ...
5
votes
1answer
169 views

QGIS- Model works on single layer execution, errors out when run as batch

I have a pretty simple model in QGIS that I am trying to use as a batch process. The model takes a line shapefile input, creates a temporary buffer, extracts by location using that created buffer, and ...
2
votes
1answer
150 views

Error in batch process converting raster from .img to .tif in QGIS 3.4.8

I'm a long time GIS user but new to QGIS. I can convert single raster files in .img format to .tif files in QGIS 3.4.8 without any issues. However, I cannot batch process the same files. The Python ...
2
votes
1answer
24 views

Giving Projection for more than one .png format at same time using ArcGIS Desktop?

I want to give a projection for multiple PNG files at the same time i.e. not one by one. Is there a tool for this or can we give a projection to that folder?
0
votes
1answer
85 views

Batch exporting individual MXDs to individual PDF files using ArcGIS Desktop?

I need to pdf several mxds into their individual pdfs and am hoping there is a quicker way to accomplish that other than opening each file individually and exporting individually. Data Driven Pages is ...
1
vote
0answers
93 views

Global Mapper (improving KMZ quality):“raster_export-KMZ” batch script creates a poor quality .kmz compared to the “raster export - KMZ” manual comm

I'm sure it's something I'm missing... In Global Mapper (GM) I've got my workspace loaded.. and I run a script that does nothing more than "EXPORT_RASTER" to KMZ. The orgin rasters loaded in GM will ...
3
votes
1answer
97 views

Google Earth Engine: batch image export with JavaScript API

My goal is to export a large mosaic into tiles defined by individual features in a vector grid (FeatureCollection). GEE debugging guide states that Export is a client-side function and won't ...
2
votes
0answers
21 views

Merge Vectorfile Outputs from Model Batchprocess in QGIS

I have written a model in QGIS 3.6 that allows to vectorize the outlines of raster layers containing measurement data. I run this model as a batch process to vectorize several field outlines in one go....
0
votes
0answers
39 views

Batch polygon clip doesn't work [ArcGIS]

I have an OSM layers of a region, but want to extract data only for city that I am interested in for further export in Illustrator: AYCS, I've created a polygon which includes the territory that I am ...
0
votes
1answer
49 views

How to Handle Proxies within Carto's Python Import API framework

I am attempting to programmatically upload new data sets (tables) to Carto with the Carto Import API Python SDK. Unfortunately, I am doing this behind a proxy which is blocking me from successfully ...
0
votes
0answers
43 views

Generating VRT in batch at GDAL

Is there any way to generate a virtual batch (.vrt) in batch? I imagine the coordinates should be in a .txt file and related to the name of the images that will be cropped. There are more than 1,000 ...
2
votes
1answer
193 views

Batch Raster Calculator

Newbie, tasked with something I think can be done this way, but not sure how to get it to work. It seems quite simple. I want to subtract a sequence of rasters (daily data): one day from the previous....
2
votes
1answer
88 views

Adding multiple Additional options to QGIS Batch processing?

How to add multiple additional options on qgis batch processing? result is : GDAL command: gdal_translate -of GTiff -co "COMPRESS=JPEG JPEG_QUALITY=75 PHOTOMETRIC=YCBCR TILED=YES" it should be ...
1
vote
0answers
20 views

Loading Resulting layers

I'm wondering how long it normally takes to "load resulting layers" after performing a batch process for overviews on QGIS. I have a large raster dataset that will ultimately be merged and need to ...
0
votes
0answers
9 views

Does Calculate Value run only once in Batch mode? [duplicate]

I wrote a model with a model-only tool (Calculate Value) as the first step. While running the model in single time, it works fine. But while run in batch mode, it yields silly results. I checked the ...
0
votes
0answers
143 views

GDALWarp and Target Aligned Pixels Not Effective

I have two sets of TIFFs of different resolutions (100m and 1000m), different alignment, and varying data types with corresponding no data values. I need to downsample the 100m TIFFs to match the ...
1
vote
1answer
41 views

In ArcMap batch processing model outputs different coordinate system and datum

I've made a simple model that takes a CSV of lat/longs with radio signal levels, makes an XY event layer, selects values over -120, then converts to raster. In the Make XY Event layer the spatial ...
4
votes
1answer
173 views

Batch convert of viewer styles from QML to SLD

Until now I was saving styles in QML files. Now I need them in SLD to be used in GeoServer. Is there a way how to perform a batch convert?
1
vote
1answer
36 views

Running convert Raster to Point Features in arcpy returns an error

I'm trying to convert a bunch of rasters to point features to further build a regression of those. Is it possible to do that without a conversion using arcpy? If not what am I doing wrong converting? ...
1
vote
1answer
87 views

QGIS tools fail with spaces in output file names

When I use tools in QGIS they generally work. However, when I use them in batch mode, they generally fail. The difference is that running once I can save results as a temporary file, but in batch ...
2
votes
0answers
243 views

Error whilsted using QGIS 3.4.4 r.series batch processing [closed]

I'm having some trouble using the Batch Processing to perform r.series, Could anyone explain what I'm doing wrong? I'm using QGIS 3.4.4. Output Log: Processing algorithm 1/1… Algorithm r.series ...
1
vote
0answers
64 views

QGIS GDAL driver error

I'm unable to complete processing in the Processing Modeler due to the following GDAL Error: 2019-01-21T10:47:12 CRITICAL Could not create raster output E:\QGIS\QGIS_Projects\GDALTEST: GDAL ...
1
vote
0answers
63 views

Unable to select table in “reclassify by table” algorithm in QGIS Processing Modeler

In the Processing Modeler (Graphical Modeler) for QGIS 3.4.3, the "reclassify by table" tool seems bugged. I cannot select a Reclassification table, even though it's an obligatory field. Am I doing ...
1
vote
1answer
235 views

How can I export selected features in Processing Modeler?

This question is a follow up from a suggestion from this thread: How to export a single feature (line) from multiple layers and export to individual layers? I'm creating a batch process that selects ...
0
votes
0answers
46 views

Removing placemark in KML exported from MapMyWalk

I created a route in MapMyWalk, saved it with distance markers turned off. When I export the file to .kml and open in Google Earth, a placemark and label for every one of the 220 miles appears. I ...
2
votes
2answers
135 views

Moving multiple points in batch using ArcGIS Desktop?

I have multiple parcel polygons and they all have one side touching the lake polygon. Each parcel polygon has a point inside which is now at the centroid of the parcel. I need to find a way to move ...
2
votes
1answer
139 views

Getting maximum values of attribute of multiple Shapefiles merged into new shapefile in QGIS?

I have thousands of points in multiple shapefiles. I want to get the maximum value of an attribute of each shapefile. Then I want to merge all the maximum values to a new layer. Is there a way to ...
2
votes
2answers
437 views

Using LAStools to repair headers for several LiDAR files?

So, I have 21 LiDAR files with incorrect information in their file headers. For example, when I import a single file into R using the following code, I get several warnings saying that there are no ...
2
votes
3answers
136 views

Batch rename MODIS data?

I have MOD13Q1 NDVI images. Data are named in this format: MOD13Q1.A2007049.h26v06.006.2015161224938_MODIS_Grid_16DAY_250m_500m_VI.tif (YYYYDDD) Here 2007 is a year and 049 is day in year. I ...
3
votes
1answer
421 views

Batch Processing in QGIS 3.4 appears to be disabled

I was trying to batch reproject several layers in QGIS 3.4.2 via Processing. However, after setting up my batch and clicking Run, nothing happened. Identical procedure in QGIS 2.18.26 LTR works fine. ...
1
vote
0answers
85 views

Batch processing DTM with Hillshade in QGIS 3

I'm using the Hillshade tool from GDAL library [Raster analysis] in QGIS 3.4. I can't use the batch process with creative options like compress=LZW or profile=Geotif. It doesn't work. The tool works ...
2
votes
2answers
343 views

How to run a batch file by FME Server

I created a batch file, which executes a .fmw workspace on FME Desktop. I want this batch file to get started by the FME Server. So I created a simple workspace with a SystemCaller transformer, which ...
1
vote
2answers
94 views

Renaming FCs in a Geodatabase with Python

I am new to Python but trying to rename hundreds of feature classes in a geodatabase. For instance, I have over 50 FCs named 'LAND_*'. Can I with my Python script to run in ArcGIS Pro to rename the '...
3
votes
0answers
40 views

How to set tile image formats for many layers using the Geoserver REST api

I have over 400 layers in my Geoserver layer catalog. I would like to turn on the pbf tile image format option for all of them. see image below: Is there a way of accomplishing this using the ...
1
vote
1answer
32 views

Troubleshooting batch reprojection script that fails some of the time without error but works other times?

This script, up until now, has successfully batch reprojected datasets of rasters to designated projections. The results of running my script on my new dataset is that the script successfully ...
1
vote
1answer
84 views

Batch project a folder of shapefiles to one projection with string appended to each output

I'm trying to create a relatively basic batch reprojection tool with Python by projecting all shapefiles in a folder to NAD83 UTM Zone 11N. I want them to go to a specified folder that I have ...
1
vote
1answer
477 views

Extract raster values to CSV in Python

Attempting to gather MODIS aerosol data for a number of different AERONET stations in the UK to plot against one another. However, due to the number of files (upwards of 2000), QGIS and ArcMap crash. ...
1
vote
1answer
25 views

How can I apply the arcpy.Rename_managment as parameter for each feature class in a loop?

I have 3 Feature Classes in a gdb. I want to create a script tool to rename each Featureclass and get each newname as parameter so we just have to type the newname we want. The original name has to ...
0
votes
0answers
49 views

QGIS batch clip does not work. One by one it works fine

When using a batch clip QGIS gets stuck at some point giving me an unknown error, while just clipping one by one works just fine. Any idea what could be causing this? EDIT: log says: Uncaught error ...