Questions tagged [batch]

To group or to do something in a group as opposed to doing it individually

Filter by
Sorted by
Tagged with
1
vote
0answers
48 views

Batching model output problem in Arcgis 10.2!

I built a simple model for projecting raster from one coordinate system to another and it works fine but when i try to batch it, so i can convert more then one raster it generates only the first ...
0
votes
1answer
108 views

Batch clip multiple rasters error arcpy

I am new to arcpy. I am attempting to batch clip over 350 rasters to one the extent of one mask raster. I tried it in model builder and it wouldn't run so now I am trying it in arcpy but I continue ...
3
votes
1answer
172 views

Compressing raster using PyQGIS?

I have the following code which batch saves rasters in qgis using the python terminal: myDir = 'd:/output/' layers = iface.legendInterface().layers() pipe = QgsRasterPipe() for layer in layers: ...
0
votes
0answers
80 views

Skipping outputs from the QGIS Batch Processing?

I am doing a lot of processing in batch with the r.sun model from GRASS 7.2.1 in QGIS 2.18.9. I am using the r.sun model with intention to reuse for further raster calculations the Irradiation raster ...
0
votes
2answers
244 views

Delete zero values for Lat-Long columns on a batch of files

I have a script to delete 0 values from a shapefile attribute table which I have converted into a csv. setwd("C:/Users/Florian/Documents/R/Evan") data = read.csv("AF_486_2005_culled_geo_Events_shp....
1
vote
1answer
653 views

Batch saving Multiple Layers on QGIS?

I have 24 layers I want to save on QGIS which all happen to be Tiff files (rasters). I am wondering how to run code to complete this task. myDir = 'C:\temp' layers = layers = iface.mapCanvas()....
3
votes
1answer
1k views

Batch csv import, styling and image export from QGIS

I have a folder of several hundred csv files with point data. I need to import each into QGIS as a layer, apply the same style to each, and then render a map (same extents) for each (these will be ...
0
votes
1answer
148 views

Want to insert a new field to CSV with filename as attribute [closed]

I have thousands of CSV files with the approximately the following structure: csv_20160601T004301Z: name,x,y, name1,23,66 name2,23,67 csv_20160601T005001Z: name,x,y, name1,23,66 name2,23,67 etc. ...
0
votes
2answers
662 views

Batch select by attribute and batch export output

I have ArcMap and a shapefile attribute table with lots of columns. Each column contains values between -1 and 1. For each column, I would like to select the values greater than 0 and then export a ...
5
votes
2answers
892 views

Batch save multiple rasters in QGIS

So I am trying to batch save 100's of styled rasters. I have managed to save a single raster in the python console using the following code: layer = iface.activeLayer() extent = layer.extent() width,...
4
votes
1answer
673 views

Programmatically naming outputs from the QGIS Modeler?

I am attempting my first use of the modeler from the Graphical Modeler from the Processing menu in QGIS (2.18.3). I made a simple model for using meanshift segmentation. It just has a raster input and ...
3
votes
1answer
897 views

Updating field with layer name on multiple layers with PyQGIS script?

Introduction : I created (with GIS.SE help) a script to batch edit many layers to add one or many fields. The initial aim was to easily add 3 fields to many layers to quicken my labelling process. ...
0
votes
0answers
41 views

Batch process doesn't work with multiple files

I'm attempting to determine land surface temperature from Landsat 5 in ArcMap 10.2.2. I created a model to generate land surface temperature. The model works correctly when I run any single landsat ...
4
votes
1answer
148 views

ModelBuilder exports the same files when running in batch mode

I've made a simple model in ModelBuilder, ArcGIS 10.1. The model take a file in gdb, select two consecutive years, and calculate the near distances between the actual and previous year. As the near ...
2
votes
0answers
111 views

QGIS Automatically Generate Atlas for each Column on the Attribute Table

I want to generate graduated maps in QGIS (using the same style) for each of the columns on the attribute table. Every columns contains the data of one year. It seems that the Atlas only ...
0
votes
1answer
103 views

Bulk Raster combining in MapInfo?

I am running mapinfo 15.2 (64bit). I have downloaded multiple Landsat 8 scenes with multispectral data. I can combine the bands of a single scene into a single mrr file using the Raster combine ...
2
votes
3answers
1k views

Creating a Canopy Height Model (CHM) image from a LAS file on Mac?

Main question: Is there a way of creating a Canopy Height Model from a LAS file using Mac (not wine etc)? I also would like to batch process a lot of LAS files the same way. I should mention that I ...
1
vote
0answers
53 views

Function “Extract by Mask” in batch mode - just one resulting layer

I would like to clip 25 raster layers with self-made polygon using "Extract by Mask" function. The problem is that I am still receiving just one processed layer, instead of 25 processed layers. ...
1
vote
1answer
150 views

Batch Processing single band raster to create multi spectral images using arcpy.CompositeBands_management?

I am kind of new to python but I am trying to batch process single band raster images to create multispectral imageries using arcpy Composite Bands. I have 24 single band rasters (Bands 1 - 3 ) all ...
0
votes
2answers
99 views

d.rast multiple times

I am using GRASS 7.2.0 on Windows 8.1 and I have 107 raster files, converted from r3.to.rast which I want to display all at once. I put in Python console (2.7.5) every name of rasters into variable d ...
1
vote
0answers
483 views

GDAL_Translate - ERROR 6: Too many command options - Batch Processing [duplicate]

I am trying to batch convert a set of JPEGs into ASCII text files. Below is the code I am running (I added the "..." for privacy, it does not actually appear in the code). gdal_translate -b 1 -of ...
3
votes
1answer
927 views

Batch flip direction of selected lines in ArcGIS 10.3

Is there a way to flip the direction of all selected lines at once?
1
vote
0answers
192 views

How to display ALL raster output from batch processing in ArcGIS 10.4

I am batch converting ASCII files into ArcGIS geodatabase using a simple ASCII to raster model. I was using ArcGIS 10.3.1 and everything was running great, all my surfaces/files were showing up at the ...
1
vote
0answers
22 views

Substitute different equation parameters (e.g. slope) when batch processing raster calculator in ArcGIS Desktop?

I have 15 multiband rasters for a total of 45 total single-bands (5 dates x 3 sensors x 3 bands per sensor) for which I need to apply a unique calibration function in the form Y=A*[exp(B*X)] to for ...
2
votes
2answers
307 views

How to batch create GeoServer users?

Is it possible to create GeoServer users for a list of usernames (and associated passwords) in one batch? (similar to using the Linux newusers command to create multiple users) I've asked a related ...
7
votes
1answer
596 views

How to batch label features using PyQGIS?

I am writing a python script to label features (lines). However I can't figure out: how to get the script to turn on the buffer how to get the script to apply the changes. When I currently run it, ...
2
votes
2answers
473 views

Batch copy a geodatabase

I'm trying to write a batch command (Windows 10) that will copy an ArcGIS geodatabase to a new folder. I know this may seem like bad practice but it is part of a much larger project creation process ...
1
vote
0answers
135 views

Batch Intersect Not Working

I'm trying to run a batch job for the Intersect(Analysis) tool in ArcMap 10.3, but when I do for 20 intersects, it brings back this error: ERROR 000210: Cannot create output. However, when I do an ...
-1
votes
1answer
214 views

Can't find event layers from batch XY process

I have 327 text files that contain xyz data from LiDAR. I need to make them into a giant point shapefile to interpolate into a DEM. I'm guessing the number of points I have is in the range of half a ...
2
votes
1answer
88 views

Automatically batch flipping and saving raster dataset under different name using ModelBuilder?

I have 168 datasets, and I clearly cannot flip each one. I've tried batch processing but it is still time-consuming because I have to manually assign dataset and I/O path. I need something to do this ...
1
vote
0answers
31 views

Batch Flip Raster [closed]

I was wondering if anyone could give me some insight as to how to batch flip a raster data set in arcpy? I know the code and syntax for flipping a single raster but am having trouble figuring out how ...
1
vote
0answers
370 views

Spatial Join for Batch Processing

I want to run the spatial join tool to join hundreds of shapefiles from two different folders. For example one folder contains point shapefiles with names d1.1,d1.2,d1.3 . . . . the other folder ...
1
vote
0answers
53 views

batch filter (r.mfilter) raster time series, keep original file name

I want to apply a filter (r.mfilter) to a raster time series while keeping the original filenames. For a similar problem when batch converting file formats in QGIS, I entered : - as file name when ...
1
vote
0answers
559 views

QGIS: Python script to batch clip vector layers and set their CRS

Here below the sript I'm trying to run. clip_zone is a polygon and in my input_folder, I have a point layer and polyline layer. #Tell Python where you will get processing from sys.path.append('C:\...
2
votes
1answer
319 views

Batch JSON to Features help

I have a folder on my local drive with 1,500+ JSON files (lines) that I need converted to shapefiles. (JSON to feature tool in ArcGIS works great on a single JSON file) I've tried getting a batch ...
1
vote
0answers
134 views

Generate LiDAR point cloud understory division through histogram and height threshold [closed]

This is somehow a good post that gives me a bit of direction; Retrieving LiDAR metrics from relative vertical layers of point cloud I'm using FUSION and rLIDAR most of the time. I'm looking for a way ...
1
vote
2answers
264 views

Save as Mapinfo Tabs multiple shp layers

i want to convert about 200 shp files to Mapinfo tabs. I found How to batch "Layer save as"-process in QGIS? on running through multiple layers and saving them as shp files. But when i tried ...
0
votes
1answer
174 views

Data Reviewer Errors loading batch job

We've recently had one of our GIS Techs create some QA/QC check via data reviewer. However no one seems to be able to use the checks he has created. We placed the single file .rbj on our shared ...
1
vote
1answer
476 views

Using QGIS batch-processing dissolve?

How to use QGIS batch-processing dissolve: Using QGIS 2.16 under Win 10 (see screenshot). Questions: Why must I have at least two rows. When I open the window I have 3 rows. Using the red minus-icon,...
1
vote
2answers
142 views

Auto batch for all of the layers in my mxd

I have a mxd file with more than 800 layers, and I want to convert all of these layers to KML files. I have tried to use the batch option in the "Layer to KML" tool, but I have to set there every ...
1
vote
0answers
50 views

Applying same algorithm to various input files in QGIS modeler?

I wonder what´s the best way to create a ROI (by clipping algorithm) for all bands of one LANDSAT scene in QGIS graphical modeler. Is there a way that avoids listing all (raster) bands and applying ...
4
votes
1answer
725 views

Can I export all print composers at the same time?

I have quite few different print composers. Can I somehow export them to pdf, one pdf for each composer, at the same time?
4
votes
1answer
305 views

Apply affine transformation to multiple layers

I have many shapefiles representing the layers of a map (roads, buildings, etc). In total, I have hundred of layers, and I want to scale all of them by the same factor. I know I can use the affine ...
2
votes
1answer
2k views

QGIS Methods for Batch/multiple shortest path calculations

Is there an established method for running multiple shortest path analysis based on multiple start and end points? I have a model outputting coordinate data and a road network with varying road ...
0
votes
1answer
119 views

Batch process for seeding multiple BBox areas in Geoserver

I am using GeoServer v2.8 and v2.9 with integrated GeoWebcache. I am seeding tiles over a very large area and obviously don't want to seed down to z10+ in un-populated areas or the sea as this is a ...
3
votes
2answers
857 views

Split Multiple Polygons into equal squares?

I have 1 single shapefile of about 70k square polygons in a grid. I want to run a process/tool/script to split all 70k polygons into 4 equal parts. The polygons are contiguous, so each polygon only ...
7
votes
1answer
1k views

Batch export from multiple QGS projects to image or PDF

I'm looking out for a way to batch export to PDF or image many composers spread in many QGS projects, the same way the plugin Map Printer does, but on a large number of projects at the same time. ...
1
vote
1answer
606 views

Python script to batch stack Landsat images

We are trying to make a script that goes through a folder full of unzipped Landsat folders and stacks all the Landsat images it finds. However since Landsat 8 images have more bands then we want to re-...
1
vote
2answers
448 views

Saving settings for batch run in ArcGIS for Desktop?

I am running a merge and dissolve on a variety of combinations of 9 different shapefiles, 3 at a time. I made a model in the model builder that takes 3 inputs and performs a merge and then a dissolve....
1
vote
1answer
345 views

Clip a Multipoint Feature Class (50 million points) with another feature class to get single xyz files [closed]

I have a very big multipoint feature class (in ArcGIS 10 imported from XYZ .txt files) and I have a shapefile which contains 50 polygons. (If I look at the attribute table, the 50 polygons are ...