Questions tagged [dem]

For questions about Digital Elevation Models (DEM), Digital Terrain Models (DTM) and Digital Surface Models (DSM)

Filter by
Sorted by
Tagged with
2
votes
1answer
984 views

shapefile to gmt format

I have an ESRI shapefile of the contours of my study area, and I want to convert it into a format that is acceptable by GMT, so I can make an elevation map of my study area. Is that even possible? ...
5
votes
2answers
1k views

Comparing two TINs created using ArcGIS for Desktop?

I have the following two files: LiDAR las file1 Let's give it a name LiDAR las file2, contains the same file1 data, where number of points randomly removed. So if file1 contains X number of points, ...
1
vote
1answer
221 views

DEM error when trying to do topographic correction in GRASS

I'm new to GRASS gis and I'm trying to do a topographic correction (i.topo.corr) of 9 ASTER bands using SRTM dem. I keep getting this error message: ERROR: Illumination model is of CELL type Is ...
5
votes
2answers
8k views

Colouring areas between (vector) contours?

Is it possible to colour areas between (vector) contours without making it a DEM first? Joshdoe seems to have done so in Create filled contour map with GRASS but does not say how.
1
vote
0answers
235 views

Contour command in Spatial Ecology's GME

Has anyone been successful using the contour command from GME (Geospatial Modelling Environment)? I'm trying to create contours out of a DEM. I know you can do it in ArcGIS with 3D or Spatial Analyst ...
2
votes
2answers
819 views

How can you create a depth raster from a DTM and a polygon in QGIS?

I have a DTM raster and a flood outline in polygon format - how do I create a depth raster for the flood outline (i.e. flood level minus DTM level)?
6
votes
5answers
8k views

Calculating Runoff / Streams using DEM in ArcGIS

I am just curious about the workflow that many of you use for runoff/stream analysis using a DEM and create a "water network" from the results in ArcGIS 10.1? I know the average rainfall for different ...
1
vote
1answer
661 views

How to use ArcMap for HydroPower Potential

I am trying to determine the sites for small hydropower. I have a elevation dem, rainfall data, Curve number data (from soil and landuse shapefiles). I have already used the DEM to fill sinks, find ...
8
votes
1answer
1k views

River boundary (bank) extraction from LiDAR

Is there any way to extract a river boundary (bank) from LiDAR data and its products (DEM, intensity image and slope) automatically? Digitizing is very time consuming.
35
votes
2answers
16k views

Proper workflow for LAS to DEM conversion

I regularly come across LiDAR (.LAS) files with elevation data. When I do, I always struggle to find a way of converting them to a DEM for hydrological analysis. I have developed several workflows, ...
6
votes
1answer
2k views

Interactively determining upslope and downslope areas on DEM?

I know SAGA GIS can be used to interactively generate maps of upslope and downslope areas for a cell within a DEM, but the output is pretty ugly. An upslope area is defined as all cells (for a ...
-1
votes
1answer
1k views

Automatic Lineament Extraction from satellite images using ENVI? [closed]

Can you tell me the steps of automatic lineament extraction from satellite images? Can ENVI perform edge detection and the lineament extraction?
3
votes
1answer
294 views

Grid-like artifact visible in contour layers?

I am creating contours from an Aster DEM in ArcMap 10.1 I see a grid pattern appearing, particularly in areas of dense contours: I see the same artifact if I create a Hillshade layer so presumably ...
1
vote
0answers
118 views

How to extract elevation data from ASTER/SRTM? [duplicate]

I just want to know if there are any other tools available in QGIS apart from the Point Sampling tool to extract elevation data from ASTER/SRTM/CartoDEM (for India) data? When I convert these images ...
0
votes
2answers
275 views

TIN to Raster - specify raster's origin [closed]

How could I specify raster's origin, while using arcpy.TinRaster_3d?
5
votes
3answers
5k views

How to drape a simple jpeg image over dem of some area?

How can we drape a simple jpeg image which doesnot have any geo referencing information over the digital elevation model in order to visualize it in 3D in QGIS?
0
votes
1answer
48 views

Is it possible to reveal the relief parameters “slope inclination” and “slope exposure” by dint of ASTER GDEM?

I’m trying to find information in technical and scientific articles – is it possible to reveal the relief parameters “slope inclination” and “slope exposure” by dint of ASTER GDEM? Or we can define ...
3
votes
0answers
2k views

Creating one DEM from multiple ASC files

I am struggling with this several days and now its time to ask how to do it in QGIS. I have very detailed 27 ASC grid files with overall size of 9 GB created from 1m contours of large area (600 m2). ...
3
votes
1answer
77 views

Algorithm behind custom tool of ArcGIS for Desktop called xyz2grid21?

I am a researcher from Romania and I have used xyz2grid21 ArcGIS tool (by Min-Lang Huang) in order to convert xyz files (LIDAR data) to ASCII and ESRI grid in order to obtain a DTM. I need to know ...
3
votes
2answers
553 views

Is SRTM 3 second arc free of non-terrain features?

I made an elevation map of my study area in Macapa, Brazil. But the region has the average elevation lesser than 30 m as I can see from my map derived from SRTM 3 second arc. According to my ...
2
votes
1answer
378 views

Query DEM Elevation at Point in QGIS

I'd like to be able to pull up a DEM (or create a mosaic of them) and simply query the elevation at points I click. Is this possible using QGIS?
2
votes
2answers
2k views

How to use OS Terrain 50 in QGIS

I am new to GIS and I wish to perform view shed analysis of wind turbines from a DEM. I have downloaded OS Terrain 50 and the data is contained within numerous zipped folders. I am using a Mac with ...
3
votes
1answer
829 views

Highest DEM pixel in polygon

I'm working with QGIS and have a big DEM raster layer with height information and a vector layer with many polygons, representing 1 x 1 degree tiles. Now I want to find for every polygon the highest ...
1
vote
0answers
264 views

Correlation between point feature (disease) and elevation [closed]

I have a problem! How can I calculate the correlation between point feature and Dem raster? Hypothesis: disease prevalence in high altitude is more than low altitude. I must do this in ArcGIS 10 and ...
2
votes
1answer
1k views

How to convert ASCII in x,y,z format using gdal_grid?

I have a map saved in (AFAIK) Arc/Info ASCII format and I would like to convert it with gdal grid but I am getting errors. My data (p.csv) is in the following format: 319053.25,319301.12,544.28 ...
4
votes
1answer
639 views

In which way is height information stored in a DEM?

I'm struggling with different DEM data, because I don't know how to convert the height information in meters. When I load ASTER and SRTM tifs in QGIS, it shows me the spectrum of the grayband (0 to ...
3
votes
1answer
360 views

Very high resolution stereo-imagery

I'm looking for very high resolution stereo imagery to perform a DEM extraction. The only place I can find sample data is http://www.digitalglobe.com/product-samples but the form does not work for me. ...
0
votes
4answers
2k views

Using Arcpy, how can I determine min and max elevation from a raster DEM layer within my current extent?

Using Arcpy, how can I determine min and max elevation from a raster DEM layer within my current extent? I'm currently using Data Driven Pages to centre the layout on each feature extent. I need to ...
5
votes
0answers
754 views

Has anyone used ArcGIS for 'automatically' detecting lineaments from a high-resolution (1m) DEM? [closed]

I have a set of DEM's produced from LIDAR data. I am wondering if anyone is familiar with or knew of any published research papers which looked at (semi-)automatically detecting lineaments /or ...
10
votes
3answers
3k views

How to extract breaklines from a given DEM?

Breaklines are very useful for describing a terrain - for example to build an exact TIN. My question is, how to extract these breaklines from a given DEM? I calculated the curvature (vertical) - ...
9
votes
3answers
2k views

Generating TIN from DEM using MacOSX/Unix tools?

I'd like to generate a 3d terrain model moving from a DEM dataset (currently in shp and GeoTIFF format). As far as I understand it, the first step of the better path would be generating a TIN, but I ...
2
votes
1answer
745 views

Obtaining average value around polygon in raster for different cross sections?

I have elevation data in a raster, river (blue line) and the flooded area (black polygon) as shown in the image below: I want to find the water depth in the flooded area (inside the black polygon). ...
1
vote
1answer
2k views

Extracting DEM from imagery using ArcGIS for Desktop?

I'm using ArcGIS for Desktop and I'd like to know how can I extract the elevation model from a imagery of photos. I have the have each image (jpg) geo referenced. After, I don't know what tool may use ...
0
votes
1answer
111 views

What dem data are Flex Viewers using to create elevation profiles?

I asked a similar question a year or two ago here: Can Elevation Profile data in Arc's Flex Viewer 3.0 be exported? which appears to not have an answer. Another question regarding the Flex Viewer (3....
0
votes
1answer
153 views

Viewshed over Multiple DEM Models Possible?

I finally got the viewshed working correctly over one DEM model. However, I am wondering is it possible to do the viewshed over multiple DEMs? E.g. A Multiple County Viewshed based off one point. ...
2
votes
3answers
2k views

ArcMap - Making DEM using GPS vector data [closed]

I am new to GIS and GPS. I am going to make a digital elevation model of my school's campus using a trimble gps unit. I know the accuracy is not the best but it is just for a school project. My ...
0
votes
1answer
3k views

QGIS 2.2: GDAL Grid (Interpolation) Error

As much as i understand Raster -> Analysis -> Raster (Interpolation) can provide me with a terrain file out of a shape file with a Z coordinate. I select the input and output file and a Z field. It ...
2
votes
1answer
8k views

Dem file in .adf format, while .tiff is needed

I would like to use this standalone tool to get different kind of Dem visualizations (http://iaps.zrc-sazu.si/en/svf#v). I see that the program accept only .tiff DEM. Now, the DEMs I got are not in ...
1
vote
1answer
3k views

Best Resampling Method for DEM reprojection in QGis

I need to reproject a DEM (aster file) in order to have the same CRS as all my other project data - I have different SHP for the same DEM's location but they have a different CRS. Which resampling ...
4
votes
1answer
917 views

Possible workflows for shaded relief representation as vector

I am looking for a good workflow on how to represent relief on a map as vector (e.g. for further processing in Adobe Illustrator or Inkscape). My inspiration is the present google maps at zoom level ...
5
votes
1answer
3k views

How to obtain a DTM/DEM from DSM

I need to obtain a grid of bare ground elevation (removing all edifices, trees, roads and man-made elements) for quantitative geomorphological analysis from a high resolution (1 m) DSM obtained by ...
1
vote
2answers
2k views

DEM mosaic: gaps

I have generated DEMs (bare earth) from Lidar data. For computational reasons, I have processed via ArcGis the lidar files in chunks, so I came up with different single DEMs. After, I used "Mosaic to ...
1
vote
1answer
479 views

Fixing Hole in DEM?

I have what looks like a hole in my DEM! I don't think it is affecting my calculations, but either way, I would quite like to correct it. Does anybody have any idea how? Please see the attached ...
1
vote
2answers
186 views

Contours from DEM with human features

I am rather new at GIS and I would like to have some guidance on what follows. I have some DEMs derived from LiDAR data. These DEMs contain building and other human features (e.g., roads). I was ...
2
votes
0answers
1k views

DTM Extraction/Smoothing in ArcGIS

I have an .las file, intended to be a DTM (bare earth) that I generated from a photogrammetry software package that has come out just a bit too lumpy. I now have the license for that software tied up ...
3
votes
1answer
3k views

Reprojecting a raster DEM from meters to feet using QGIS?

Is there a tool in QGIS that does the same as reprojecting a raster DEM from meters to feet as in ArcGIS's 3D Analyst > Raster Math > Times ?
8
votes
1answer
2k views

Partially updating raster (DEM)?

How to update an .img DEM in ArcView 9.3? I do have DEM which need to be updated only if few parts. The area to be updated has been produced in separate DEM with Spline Interpolation with Barriers. ...
3
votes
2answers
939 views

Merging DEMs of different grid size

I'm trying to merge two grids with different cell size. One has a cell size of 10m and the other 50m. The 10m one covers a subarea of the 50m one. I know that the most accurate one is the 10m one and ...
1
vote
0answers
99 views

Using GeoBrain WCS4DEM in QGIS?

I added the GeoBrain WCS server to the server list: http://geobrain.laits.gmu.edu/cgi-bin/gbwcs-dem?version=1.0.0& I connect to the server and get a list of layers. I select the first one listed -...
5
votes
2answers
814 views

How to query DEM elevation values in a web application based on cursor/click point location?

I work for a city government that has LiDAR derived DEM rasters which we would like to make accessible to other departments in the city. The problem is that many departments don't have anyone with ...