Questions tagged [error-999999]

"Error 999999: Error executing function" - a generic error in Esri ArcGIS products without a specific error ID. Basically it means "uh-oh something bad happened".

Filter by
Sorted by
Tagged with
1
vote
0answers
12 views

KeyError: “The name 'ImageTensor:0' refers to a Tensor which does not exist. The operation, 'ImageTensor', does not exist in the graph.”

I'm trying to use ArcGIS Pro 2.3 and this tutorial (https://medium.com/geoai/high-resolution-land-cover-mapping-using-deep-learning-7126fee571dd) to use the function "Classify Pixels Using Deep ...
1
vote
2answers
70 views

Getting Erase ExecuteError 999999?

I've made an arcpy script which worked last week, but I placed it somewhere different on my computer. I've made sure all the source files etc. are connected. However now I keep getting an error ...
0
votes
1answer
32 views

Converting Raster Density File into Point using ArcGIS Desktop?

I used the Point Density tool to create raster files. I plan on scaling these density values by dividing them by the greatest density value and then multiplying the result with a certain value that is ...
5
votes
1answer
42 views

Error in reclassifying with ArcPy

I am trying to reclassify DEM using arcpy.sa.Reclassify and it is showing an error. Following are my commands: dem_re=arcpy.sa.Reclassify("dem_extfish.tif","VALUE",arcpy.sa.RemapRange([[391, 677, 1],...
8
votes
7answers
12k views

Geometry is not M-Aware?

When using the Erase geoprocessing tool from the Analyst Toolbox I get the following error "ERROR 999999: Error executing function. The geometry is not M-aware Failed to execute (Erase)." With small ...
18
votes
7answers
11k views

Listing feature classes with active domains?

I have an Esri file geodatabase with attribute domains defined. I need to delete some of the attribute domains but can't because "The domain is used by an attribute rule.". How might I discover which ...
0
votes
0answers
31 views

ERROR: Failed to write a pixel block. [Possibly out of disk space]

I have a problem with the ModelBuilder in ArcGIS. I make an Iteration and after 7 working iterations I always get the following error when executing Cost Distance: Failed to write a pixel block. [...
1
vote
2answers
150 views

CreateTable_management as part of a script tool fail

I am trying to create a table as part of a script tool, and it always fails with error 999999. The general idea of the script is that it is calculating proportional coverage of things in a series of ...
0
votes
2answers
43 views

Reprojecting a GDB in arcpy

I am trying to convert the feature classes in data.gdb to a new PCS per the code on this webpage: import arcpy import os arcpy.env.workspace = "G:/W135thStCopy/data.gdb" arcpy.env.overwriteOutput = ...
0
votes
1answer
41 views

Zonal Statistics as Table: 999999 Error

I am receiving a 999999 error each time that I attempt to run Zonal Statistics as Table. I am attempting to overlay population data from an asc file with a shp file with French Alsatian municipal ...
0
votes
1answer
35 views

Every geoprocess with merged raster produces 999999 (ArcMap 10.6)

I have a county where there is some LiDAR (1 meter) coverage. For the rest of the county I downloaded 10 meter DEM from USGS. Both rasters are in same projection and units. I resampled the 10 meter to ...
0
votes
0answers
31 views

Field calculator not working with division command

Really do not understand what is up. I am able to sum two columns, but unable to divide them. I selected out any entries with "0". Nonetheless, a simple division command in the form of ([a]+[b])/[...
1
vote
0answers
183 views

Using Arc Hydro tools in ArcGIS Pro for stormwater workflows?

Has anyone had success using Arc Hydro for ArcGIS Pro for stormwater workflows? I'm currently using ArcGIS Pro version 2.3 with the ArcHydro 2.0.13 tools from 1/4/2019 I downloaded here: http://...
1
vote
1answer
205 views

Getting ERROR 999999 when trying to use arcpy.UploadServiceDefinition_server()?

Here is my code def upload(name, client, working_dir): arcpy.env.overwriteOutput = True arcpy.SignInToPortal('https://www.arcgis.com', username, password) outdir = working_dir + "\\PROJECTS\\" +...
0
votes
1answer
42 views

Creating Python code with ArcMap to export maps in jpg?

I want to export maps that I have created on ArcMap 10.1 with this Python code: mxd = arcpy.mapping.MapDocument("CURRENT") for i in range(1, mxd.dataDrivenPages.pageCount + 1): mxd....
0
votes
6answers
16k views

Why does Clip keep giving Error 999999: Error executing Function Invalid Topology [Topoengine Error]?

The layer being used as the Clip Features has been used before and worked fine, so I assume the issue is the layer I am trying to Clip (Input Features) - I keep receiving the same error when running ...
0
votes
0answers
16 views

Table to domain giving ERROR 999999?

I am getting an Error while trying to execute "table to a domain". The domain is "Nednaam": The table is a .xls file, named "NedFlora", also a tekst file and looks like this: My input: My output: ...
0
votes
1answer
51 views

arcpy.Rename_management() returning ERROR 999999 and [Errno 13]

I have a function where I am trying to rename a geodatabase, both os.rename and arcpy.Rename_management() work in the Python window but not in the Script when run as a tool through ArcCatalog. ...
0
votes
0answers
39 views

Reading and processing large shapefile

I have a large shapefile (~10 Gb) which it output of Atoll (RF Coverage) and I need to perform some post-processing on it. I began by importing the file in a file geodatabase, the file was imported ...
0
votes
0answers
13 views

Layers not overlapping and not clipping the layer [duplicate]

Does anyone have an idea about two layers are not overlapping on one another? I have one raster and one vector layer, I wanted to clip or extract by the mask of my raster by using shapefile but it's ...
1
vote
1answer
24 views

Add and Calculate Fields of Iterated Annotation Classes

I'm have difficulty with my script Arcmap v10.5.1. I get a syntax error on line 8. My question is: Can I calculate the Added field from an existing field within an iterated value? If so, what's my ...
1
vote
0answers
21 views

Getting error from Arcpy Tabulate_area

I am trying to get the area of land use in each pixel of the fishnet file. I used the following script: arcpy.gp.TabulateArea_sa("fishnet_layer","FID","lulc.tif","Value","lulc_tab","1.1E-3") Here ...
0
votes
2answers
48 views

Loop through a range of rasters and use tool output as input for the next tool run

I'm using the particle track tool and limiting it to a specific trackingtime. For each tool run, I want the rasters input (magnitude and direction) to change to the next rasters in the lists, and the ...
5
votes
1answer
3k views

How to Make a New Shapefile Based on Attributes of an Existing Shapefile?

In my last post I had an issue where I wanted to create multiple shapefiles based on only one attribute field (years). How to do it was answered in that post. I want to make that tool more dynamic so ...
0
votes
0answers
55 views

Why is my DEM raster (.tif) not converting to TIN (Gives “Error 999999” instead)

I am working with a DEM raster file (.tif) which I am trying to convert into a TIN. However it won't let me do this and instead I get the following "ERROR 999999: Something unexpected caused the tool ...
0
votes
1answer
36 views

Clipping Raster Mosiac Simultaneously Within Separate ArcPy Scripts?

I have a large raster mosaic dataset that I would like to clip within several scripts simultaneously, but whenever I run two instances of a script simultaneously one always fails with the error: ...
1
vote
2answers
235 views

Using 'if' function to set field value based on various other field values gives ERROR 999999?

I am trying to populate a field with a value from another field in the same row, the condition I have set for this to take place is if a third field is equal to 0. In order to achieve this I have ...
1
vote
0answers
56 views

arcpy.SummarizeWithin_analysis error: error in executing tool

I am trying to identify and sum the lengths of line segments within a polygon boundary using the arcpy tool: arcpy.SummarizeWithin_analysis('my_gdb.DBO.gridzones', 'my_gdb.DBO.lines', 'my_gdb....
1
vote
2answers
72 views

Locate LAS Points By Proximity gives ERROR 999999?

I am trying to locate LAS points which is within a specific distance (25cm or 50cm) from the 3D points in a feature class. This is exactly what the Locate LAS Points By Proximity tool should do. My ...
2
votes
2answers
140 views

Converting none to zero (0) in geodatabase table using ArcPy?

I have an attribute table looks like this How do I convert Nulls into 0? I've tried to set this table non nullable type but got this: while the official doc says this: At least one of them is ...
0
votes
1answer
169 views

Error 999999 calculating Euclidean Distance?

I am trying to calculate Euclidean Distance in ArcMap and I keep getting: ERROR 999999: Error executing function. Failed to execute (EucDistance). I gave a maximum distance of 5000m, output ...
5
votes
1answer
2k views

Calculate Field in ModelBuilder gives General error executing calculator. ERROR 999999: Error executing function. Expected end of statement?

I am attempting to do zonal statistics for multiple images and I need to add an extra field that will have the name of each raster file in each row to the finally appended file. I have added a field ...
1
vote
0answers
40 views

Region group tool gives ERROR 999999?

I have an issue with the tool "region group". When I run my model, it always fails because of the region group tools. The error state this: ERROR 999999: Error executing function. The table was ...
1
vote
1answer
54 views

999999 Generic Error when converting CSVs to dBase with TableToTable_conversion()

I am attempting to convert 5 fairly large CSV files into DBFs using ArcPy. My code is below. Currently when I run this script I am met with the following error: ExecuteError: ERROR 999999: Error ...
10
votes
2answers
19k views

Invalid Topology [Topoengine error] from ArcGIS for Desktop?

Using ArcGIS 10.1 for Desktop, I'm trying to run the Identity function on two large data sets but it fails every time. I don't think it is a lack of hardware as I can run other processes on the same ...
1
vote
0answers
34 views

Zonal Statistics as Table: Generic 99999 Error on Some Features [closed]

I'm running Zonal Statistics as Table on three separate feature classes. These feature classes represent travel walk bands from various locations. These travel bands are my zone data, I have a regular ...
0
votes
1answer
72 views

Choosing correct Projection name for ArcPy?

I am trying to plug in a projection name to my code, but I think the syntax/name is incorrect. arcpy.env.outputCoordinateSystem = arcpy.SpatialReference("US Albers Equal Area Conic") When I run the ...
0
votes
1answer
43 views

Cannot use Raster created by Watershed Spatial Analyst Tool?

I am trying to determine the relative drainage area of two type of distinct wetlands. I am using these individual wetlands as the pour points for the watershed tool in ArcMap's spatial analyst toolbox....
0
votes
1answer
70 views

Executing CostDistance Function in ArcPy gives Error 999999?

I am attempting to create a least cost path using ArcPy for automation. I have the starting/end points and cost surface raster already assembled, so I am just using ArcPy to automate through my ...
21
votes
5answers
21k views

Including variable in where clause of arcpy.Select_analysis()?

I am trying to loop through a shapefile, selecting each feature in turn and copying it to a temporary shapefile to by included in a union analysis. I'm using a cursor to find the ID name for each ...
1
vote
1answer
210 views

Creating loop to reproject multiple rasters in ArcPy gives ERROR 999999?

I am trying to batch reproject multiple raster files using arcpy. Here is the code I have so far: # Import system modules import arcpy import os # Set environment settings arcpy.env.workspace = "H:...
0
votes
1answer
324 views

Correct Format for UTM coordinates fed to ArcMap “Convert Coordinate Notation” Tool?

I am trying to use Arc's (v.10.2) "Convert Coordinate Notation Tool" to convert UTM coordinates into WGS84. The UTMs are in one column of an Excel spreadsheet as follows: UTM 346677 E 5293198 N ...
3
votes
1answer
1k views

Inserting DATAFRAME_ELEMENT value into dynamically generated shapefile containing its extent?

This is for ArcGIS 10, Python 2.65. I have code which captures the extent of dataframes within all mxd's in a directory. I also want it to add the dataframe name, scale and the name of the MXD it ...
4
votes
2answers
110 views

Splitting worldwide roads into multiple road datasets with less than threshold number of features?

I want to split a worldwide 'road dataset' into multiple grids/blocks-extents, depending on the amount of features resides in that block-extent. If the amount of features(inside that block) is still ...
-2
votes
2answers
48 views

Update 7000+ attribute column at once? [closed]

ArcMap. I have a string field "Zonenumber" that contains 7000+ lines. This field contains various zoning designations. I need to update every single one of these selected properties to a single zone. ...
2
votes
1answer
38 views

Adding spatial reference to many shapefiles in loop using ArcPy? [duplicate]

AST folder has 5 shapefiles. This code tries to pass the 2100 coordinate system to these shapefiles. But it gives error 999999: arcpy.env.workspace = r"C:\Users\user\Desktop\roads\AST" for i in ...
1
vote
0answers
139 views

Reclassification and Con(0 not working arcpy [closed]

I have a raster that has three pixel values=0,1,2. I want all pixels of value 2 to be 1. The raster is in tif format, 32 bit signed type. Below is my arcpy script- inRaster1="path address/input.tif" ...
0
votes
0answers
84 views

error 999999 add rule to topology management

I was trying to create a topology with some rule, but I have problems with the rule "Must Be Covered By Feature Class Of". I get the error "999999: Error executing function." This is the code: WU =...
1
vote
0answers
433 views

ArcGIS Repair geometry doesn't solve “Incomplete void poly” error

I'm working with 8 shapefiles at approximately 63 mb in size total and I am trying to use ArcGIS/arcpy's Union to combine them into one single dataset. Each time I run this, I get the error: ...
6
votes
1answer
6k views

Extract Values to Point from Raster Issue

I am trying to use the tool Extract Values to Points on a File Geodatabase raster, but I am getting some weird errors. I've used this tool multiple times before with no issue, but not since I ...