Questions tagged [error-999999]

"Error 999999: Error executing function" - a generic error in Esri ArcGIS products without a specific error ID. Basically it means "uh-oh something bad happened".

Filter by
Sorted by
Tagged with
0
votes
0answers
16 views

Failed to execute Raster to Point for multiple rasters in Model Builder

I am trying to create Hotspot Analysis for multiple point shapefiles. For that, I am converting the rasters to point using "Raster to Point" tool in Model Builder. It's converting the first file but ...
0
votes
0answers
43 views

ERROR 999999 from Project Raster - any advice?

I have a DEM layer (TIFF raster) for the island of Crete downloaded from the EU Copernicus EU-DEM website and a point data layer for locations of interest around the island. I cannot seem to get the ...
1
vote
0answers
29 views

Feature Class to Feature Class error: 999999 (ArcGIS Pro 2.5)

I've tried this with the new ArcGIS Pro 2.5 Python Notebook and the Python compiler from within Pro. I have about 15 layers that I'm reading in from a couple different external servers. I can read in ...
0
votes
1answer
34 views

ArcPy Raster to Polyline outputting empty shapefiles and a 999999 error?

I am running a lengthy script to post-process raster channel paths into polylines so I can measure their length using Add Geometry. Script runs well until I go to convert the rasters to lines using ...
2
votes
0answers
40 views

Error 999999, Table name is invalid - Zonal Stats as table

I am attempting to run a model that iterates rasters and computes zonal statistics returning a table. The raster's statistics are computer across all polygons in a specific shapefile. This model ...
0
votes
1answer
42 views

ArcMap calculate field based on conditional statements for other fields

I have a large dataset of species occurrence records. One field, (call it "Status_Full") contains a string of abbreviations of each designated statutory status for each record. Another field (call it "...
1
vote
0answers
28 views

ArcGIS ModelBuilder and Inline Variable Substitution Error

I have a feature class consisting of about 100 or so lines. I'm trying to use ModelBuilder to generate a profile table for each line so that I can generate elevation profiles for each one. My model is ...
1
vote
0answers
38 views

Error in ArcPy script building network

I am trying to use the network analysis toolset to build a route. I made the the tool in model builder initially and have tried to edit it to make it a script. When I try to build the network I get ...
1
vote
1answer
75 views

“Error 999999: Error executing function - Attribute conversion error” when running RegisterWithGeodatabase

I am using ArcPy to run through all of the spatial views in an enterprise GDB, register them with the GDB, and assign domains to the registered view. It runs great for most of the views in the GDB, ...
0
votes
2answers
42 views

Replacing all <Null> values in the attribute tables of all feature classes in a FGDB with the blank (empty) ones

I need to iterate through a file GDB feature classes to replace values found in all the columns of attribute tables with the blank ones (empty''). Here is my code, that doesn't work. Truth be told I'...
0
votes
1answer
57 views

Iterating through geodatabase and assigning field value based on spatial location using ArcPy

This is very similar to Python script to iterate through geodatabase and assign field value based on spatial location and Assigning field value based on location without join just different data. ...
1
vote
0answers
104 views

999999 error when executing StageService_Server to create service definition file in ArcGIS Pro

Oh, the dredded 999999 error. I am trying to create a service definition in arcpy for ArcGIS Pro. I succeed in creating a .sddraft but I fail to create a .sd sharing_draft = mlist[0]....
0
votes
1answer
69 views

Register view with geodatabase fails (view selects table from different user)

I have two users/schemas in an Oracle 18c geodatabase (10.7.1): USER_A USER_B Scenario 1: I can create a view in USER_A: SELECT * FROM USER_A.TEST_TBL. I am able to successfully register the ...
1
vote
1answer
78 views

Executing Fill in ArcPy gives ERROR 999999?

I am having trouble using Fill in arcpy as part of a tool. It works fine as a script, but when I create a tool, it fails. To localize the problem I modified the Help stand-alone script associated with ...
2
votes
2answers
56 views

Finding and replacing with if then else statement in field calculator of ArcGIS Pro?

I have a column of strings that always start with the first two characters being numbers, like 39 or 07, etc. In a new column I want to process the original column so that I replace any of those ...
0
votes
0answers
72 views

Creating Accuracy Assessment Points gives Error 999999 in ArcGIS Desktop?

I am using ArcGIS Desktop 10.6.1. I am trying to create 500 stratified random accuracy assessment points for my raster generated using the supervised classification tool (followed by the reclassify ...
0
votes
0answers
95 views

Extract/Clip LAS (LiDAR lasd) based on shapefile, using ArcGIS Pro and ArcMap 10.6

I have a few large LAS files which span a big area. I have created an .lasd dataset in ArcGIS Pro and ArcMap 10.6. I want to use a shapefile to define the extent of the LAS file, and extract/filter ...
1
vote
2answers
140 views

Printing error message to console or log file in ArcPy? [closed]

My code is as follows: Essentially, I have one table in my database that is not able to convert into my FGDB. When I run on command line, I am able to get an error message of: WARNING: Failed to ...
1
vote
0answers
280 views

KeyError: “The name 'ImageTensor:0' refers to a Tensor which does not exist. The operation, 'ImageTensor', does not exist in the graph.”

I'm trying to use ArcGIS Pro 2.3 and this tutorial (https://medium.com/geoai/high-resolution-land-cover-mapping-using-deep-learning-7126fee571dd) to use the function "Classify Pixels Using Deep ...
5
votes
1answer
74 views

Error in reclassifying with ArcPy

I am trying to reclassify DEM using arcpy.sa.Reclassify and it is showing an error. Following are my commands: dem_re=arcpy.sa.Reclassify("dem_extfish.tif","VALUE",arcpy.sa.RemapRange([[391, 677, 1],...
0
votes
0answers
129 views

ERROR: Failed to write a pixel block. [Possibly out of disk space]

I have a problem with the ModelBuilder in ArcGIS. I make an Iteration and after 7 working iterations I always get the following error when executing Cost Distance: Failed to write a pixel block. [...
0
votes
2answers
62 views

Reprojecting a GDB in arcpy

I am trying to convert the feature classes in data.gdb to a new PCS per the code on this webpage: import arcpy import os arcpy.env.workspace = "G:/W135thStCopy/data.gdb" arcpy.env.overwriteOutput = ...
0
votes
1answer
73 views

Zonal Statistics as Table: 999999 Error

I am receiving a 999999 error each time that I attempt to run Zonal Statistics as Table. I am attempting to overlay population data from an asc file with a shp file with French Alsatian municipal ...
0
votes
0answers
100 views

Field calculator not working with division command

Really do not understand what is up. I am able to sum two columns, but unable to divide them. I selected out any entries with "0". Nonetheless, a simple division command in the form of ([a]+[b])/[...
0
votes
0answers
37 views

Table to domain giving ERROR 999999?

I am getting an Error while trying to execute "table to a domain". The domain is "Nednaam": The table is a .xls file, named "NedFlora", also a tekst file and looks like this: My input: My output: ...
0
votes
0answers
41 views

Reading and processing large shapefile

I have a large shapefile (~10 Gb) which it output of Atoll (RF Coverage) and I need to perform some post-processing on it. I began by importing the file in a file geodatabase, the file was imported ...
1
vote
1answer
28 views

Add and Calculate Fields of Iterated Annotation Classes

I'm have difficulty with my script Arcmap v10.5.1. I get a syntax error on line 8. My question is: Can I calculate the Added field from an existing field within an iterated value? If so, what's my ...
1
vote
0answers
32 views

Getting error from Arcpy Tabulate_area

I am trying to get the area of land use in each pixel of the fishnet file. I used the following script: arcpy.gp.TabulateArea_sa("fishnet_layer","FID","lulc.tif","Value","lulc_tab","1.1E-3") Here ...
0
votes
1answer
46 views

Every geoprocess with merged raster produces 999999 (ArcMap 10.6)

I have a county where there is some LiDAR (1 meter) coverage. For the rest of the county I downloaded 10 meter DEM from USGS. Both rasters are in same projection and units. I resampled the 10 meter to ...
0
votes
0answers
107 views

Why is my DEM raster (.tif) not converting to TIN (Gives “Error 999999” instead)

I am working with a DEM raster file (.tif) which I am trying to convert into a TIN. However it won't let me do this and instead I get the following "ERROR 999999: Something unexpected caused the tool ...
0
votes
1answer
59 views

Clipping Raster Mosiac Simultaneously Within Separate ArcPy Scripts?

I have a large raster mosaic dataset that I would like to clip within several scripts simultaneously, but whenever I run two instances of a script simultaneously one always fails with the error: ...
0
votes
1answer
66 views

Creating Python code with ArcMap to export maps in jpg?

I want to export maps that I have created on ArcMap 10.1 with this Python code: mxd = arcpy.mapping.MapDocument("CURRENT") for i in range(1, mxd.dataDrivenPages.pageCount + 1): mxd....
0
votes
1answer
109 views

arcpy.Rename_management() returning ERROR 999999 and [Errno 13]

I have a function where I am trying to rename a geodatabase, both os.rename and arcpy.Rename_management() work in the Python window but not in the script when run as a tool through ArcCatalog. ...
0
votes
2answers
54 views

Loop through a range of rasters and use tool output as input for the next tool run

I'm using the particle track tool and limiting it to a specific trackingtime. For each tool run, I want the rasters input (magnitude and direction) to change to the next rasters in the lists, and the ...
0
votes
1answer
44 views

Converting Raster Density File into Point using ArcGIS Desktop?

I used the Point Density tool to create raster files. I plan on scaling these density values by dividing them by the greatest density value and then multiplying the result with a certain value that is ...
0
votes
2answers
81 views

Getting Erase ExecuteError 999999?

I've made an arcpy script which worked last week, but I placed it somewhere different on my computer. I've made sure all the source files etc. are connected. However now I keep getting an error ...
1
vote
0answers
133 views

arcpy.SummarizeWithin_analysis error: error in executing tool

I am trying to identify and sum the lengths of line segments within a polygon boundary using the arcpy tool: arcpy.SummarizeWithin_analysis('my_gdb.DBO.gridzones', 'my_gdb.DBO.lines', 'my_gdb....
2
votes
2answers
183 views

Converting none to zero (0) in geodatabase table using ArcPy?

I have an attribute table looks like this How do I convert Nulls into 0? I've tried to set this table non nullable type but got this: while the official doc says this: At least one of them is ...
0
votes
1answer
374 views

Error 999999 calculating Euclidean Distance?

I am trying to calculate Euclidean Distance in ArcMap and I keep getting: ERROR 999999: Error executing function. Failed to execute (EucDistance). I gave a maximum distance of 5000m, output ...
1
vote
0answers
57 views

Region group tool gives ERROR 999999?

I have an issue with the tool "region group". When I run my model, it always fails because of the region group tools. The error state this: ERROR 999999: Error executing function. The table was ...
1
vote
0answers
84 views

Zonal Statistics as Table: Generic 99999 Error on Some Features [closed]

I'm running Zonal Statistics as Table on three separate feature classes. These feature classes represent travel walk bands from various locations. These travel bands are my zone data, I have a regular ...
0
votes
1answer
126 views

Choosing correct Projection name for ArcPy?

I am trying to plug in a projection name to my code, but I think the syntax/name is incorrect. arcpy.env.outputCoordinateSystem = arcpy.SpatialReference("US Albers Equal Area Conic") When I run the ...
0
votes
1answer
54 views

Cannot use Raster created by Watershed Spatial Analyst Tool?

I am trying to determine the relative drainage area of two type of distinct wetlands. I am using these individual wetlands as the pour points for the watershed tool in ArcMap's spatial analyst toolbox....
1
vote
1answer
63 views

999999 Generic Error when converting CSVs to dBase with TableToTable_conversion()

I am attempting to convert 5 fairly large CSV files into DBFs using ArcPy. My code is below. Currently when I run this script I am met with the following error: ExecuteError: ERROR 999999: Error ...
0
votes
1answer
628 views

Correct Format for UTM coordinates fed to ArcMap “Convert Coordinate Notation” Tool?

I am trying to use Arc's (v.10.2) "Convert Coordinate Notation Tool" to convert UTM coordinates into WGS84. The UTMs are in one column of an Excel spreadsheet as follows: UTM 346677 E 5293198 N ...
-2
votes
2answers
49 views

Update 7000+ attribute column at once? [closed]

ArcMap. I have a string field "Zonenumber" that contains 7000+ lines. This field contains various zoning designations. I need to update every single one of these selected properties to a single zone. ...
1
vote
2answers
233 views

CreateTable_management as part of a script tool fail

I am trying to create a table as part of a script tool, and it always fails with error 999999. The general idea of the script is that it is calculating proportional coverage of things in a series of ...
2
votes
1answer
42 views

Adding spatial reference to many shapefiles in loop using ArcPy? [duplicate]

AST folder has 5 shapefiles. This code tries to pass the 2100 coordinate system to these shapefiles. But it gives error 999999: arcpy.env.workspace = r"C:\Users\user\Desktop\roads\AST" for i in ...
1
vote
0answers
171 views

Reclassification and Con(0 not working arcpy [closed]

I have a raster that has three pixel values=0,1,2. I want all pixels of value 2 to be 1. The raster is in tif format, 32 bit signed type. Below is my arcpy script- inRaster1="path address/input.tif" ...
0
votes
0answers
141 views

error 999999 add rule to topology management

I was trying to create a topology with some rule, but I have problems with the rule "Must Be Covered By Feature Class Of". I get the error "999999: Error executing function." This is the code: WU =...

1
2 3 4 5