Questions tagged [fill]
Fill is one aspect of polygon symbology and consists of fill-style, fill-color, fill-pattern (if applicable).
1
vote
1answer
39 views
Dashed line with different colour fill and stroke in QGIS
How can I create a dashed line with a different fill and stroke colour?
I have a white dash line on my map "former range" which doesn't show up in the legend, which has a white background. I want to ...
2
votes
2answers
165 views
Apply Line Pattern Fill to LineStrings?
I am trying to print out a network map using black/white hatching patterns, similar to Black/white hatching pattern fills in QGis but for Lines. Is there some trick I can use?
2
votes
1answer
50 views
Remove edge styles on polygons
I have multiple polygons aligned next to each other. They are colorfilled with "Graduated" style. I have changed "Stroke style" to "No Pen".
How can I get the hairline between the polygons to ...
2
votes
2answers
221 views
Fill sinks until a known value
I have a DEM and I want to fill every sink with a Value of 2 meter. If a sink is less than 2 meter, it is filled full and if it is bigger, it is filled until it reach 2 meter.
The problem is that ...
3
votes
1answer
733 views
Filling gaps between polygons using QGIS?
Here are my polygons of town blocks.
The colored towns are considered as areas where they have the same post code.
What I eventually want is to make seamless polygons where there are no gaps between ...
4
votes
2answers
457 views
Interpolate smoothly nodata values in QGIS
I have a DEM raster where all the buildings have been extruded and now contain "nodata" values. I'd like fill the holes and get a nice and continuous surface (which would approximately correspond to ...
2
votes
1answer
184 views
Using raster image fill and simple fill together in QGIS symbol selector
In ArcMap I have USGS BMP files for geological lithology patterns to fill a polygon. When I choose Picture fill symbol and add one of this BMP files then as a second fill layer I choose simple fill ...
7
votes
1answer
96 views
Point pattern gradient fill
I'm trying to create a point pattern gradient fill for some polygons, because I don't want harsh boundaries. The boundaries should blend in with the background.
Since I use open streetmap as ...
1
vote
1answer
34 views
Creating fill symbols in QGIS [duplicate]
Is there a way to create custom fills from a hi res raster format (e.g., png file)?
0
votes
1answer
109 views
Create patterned polygon fill in ArcMap with random sized dots?
I would like to create a polygon fill with a pattern of dots that are randomly sized (within a range). If this is possible in ArcMap 10.4 desktop, how should I go about this?
2
votes
1answer
136 views
Function or method in GEE that allows to fill sinks in Digital Elevation Models (DEM)
I would like to know if there is any function or method in Google Earth Engine (GEE) that allows to fill sinks in Digital Elevation Models (DEM) like the algorithms available in traditional GIS ...
1
vote
0answers
98 views
rescale MODIS NDVI value- fill value and background value after clip study area
I want to use MODIS NDVI time series to extract phenological parameters using TIMESAT software.
I have question about data prepration, Is it alwaysd necessery to rescale NDVI data?
valid range in ...
3
votes
0answers
133 views
Fill not filling all sinks using ArcGIS Spatial Analyst and ModelBuilder?
I am trying to make a model where I get a shapefile of conical hills in ArcMap 10.5.1. First I invert the DEM to get depressions. Then I used the fill tool and I set z-limits for each meter from 10 to ...
1
vote
3answers
529 views
Doing watershed delineation properly using ArcGIS Desktop?
I am using ArcGIS Desktop 10.2.
I have the contours and the stream in AutoCAD Civil, after converting to a shapefile, I exported them in GIS,
after I created the TIN from the contours below:
...
5
votes
1answer
326 views
Layer styling: custom text as a polygon fill in QGIS
How would one fill a polygon with a custom text? I know you can use this approach to create a label-wise polygon filling (= labeling polygon with their attribute's values), but is there an option to ...
1
vote
0answers
487 views
Saga 2.3.2 fill sink
I am trying to run the saga fill sinks (wang &liu) but it always results in following error
"'NoneType' object has no attribute 'crs' See log for more details". I am using QGIS 2.18.12. I am ...
0
votes
1answer
81 views
VendorOption parameters (graphic-margin,…) based on attribute
I want to add margins around polygon graphic fills based on an attribute but it doesn't seem to work. Maybe I'm doing something wrong or maybe it's not possible at all.
The same goes for other ...
2
votes
1answer
72 views
Fill in gaps between rooms in floor plan using ArcGIS Desktop?
I am currently compiling a GIS of floors of a building. However, the current shapefiles have gaps between the rooms (the thickness of the walls-- shown below). I want to do some analysis on these ...
2
votes
3answers
1k views
Removing black pixels of georeferenced image without affecting interior pixels using GDAL?
I am looking for an algorithm or function in GDAL that can remove black pixels out of image boundaries. Note that I've tried gdal_fillnodata (gdal.FillNoData) and the result was good in most cases; ...
2
votes
1answer
238 views
QGIS Composer - Exported Map layer diagonal fill becomes solid (dense)
When I export my compiled map from QGIS to JPEG or PDF the fill pattern becomes solid rather than diagonal lines. I am exporting at 600dpi when to JPEG. But it is clear that the diagonal lines are ...
1
vote
1answer
238 views
Raster data like heatmap from polygons w.r.t their own values
I have polygons as below, and each polygon is assigned to some value.
What I'd like to do are ...
Smoothen boundaries (Values should change more smoothly around boundaries)
Fill N/A part properly
...
0
votes
1answer
34 views
Running a succession of spatial analyst tools
I am writing a very simple code in ArcMap. but it does not run correctly. I want to put a majority filter on my input raster, then use fill tool and then subtract the filled one from the last one and ...
15
votes
1answer
762 views
Filling shape with labels or attributes in QGIS?
In QGIS, I would like to set the fill of a shape to be a pattern repetition of label values (i.e. an attribute of the item).
Is this possible, looking a little like the sketch below (for shapes with ...
6
votes
1answer
541 views
Point pattern fill with randomly roatetd symbol in QGIS
I'm looking for a way to fill polygon(s) in QGIS with randomly rotated symbols, to reproduce this effect:
This was generated with Illustrator, and as such it is actually a periodic pattern, ...
2
votes
0answers
32 views
Volume calculation using Mosaic & Cut Tools [closed]
I'm new to ArcGIS and I'm taking an introductory course for it. I have a problem trying to quantify the volume of a lake. The lake is enclosed by two dams which are to be extended from 1909 to 1932 m....
1
vote
0answers
77 views
Need to fill the area of shapefile that contains LineStrings, which form a polygon, in ipython
The porblem I have is that I fetched the data about the administrative level of vienna (from OSM via overpass --> vienna relation id = 109166) as xml format. (json didn't work it had encoding problems)...
7
votes
2answers
966 views
Fill a polygon with a graphic file
What I want to do is to fill a polygon (country) with a graphic file in any format (jpg., bmp., png.).
It should look like this:
I'm aware that GIS soft is not proper for such a operations but ...
2
votes
1answer
2k views
Fill polygon with SVG image pattern
I want to fill my polygons in openlayers 3 to make them look like this:
In QGIS I can provide a svg image to create this kind of pattern. How can this be achieved in openlayers 3?
Background / ...
2
votes
1answer
740 views
How to 'fill' a region in a raster layer specified by a shape with a value
I have a shapefile for a country, made up of a shape per province. I want to create a raster layer in the shape of the country and for each pixel in the area covered by province 1 set the value to ...
1
vote
0answers
231 views
Fill area within two line
EdI'm a completely new user to QGIS, using version 2.12.
I'm trying to built a map featuring a quite large river. The waterway layer displays all streams in the area, plus the edges of the river, ...
3
votes
1answer
806 views
Modifying the texture/fill of a vector layer in PyQGIS
Currently I am writing a standalone Python script to modify a few vector layers to have a wine fill pattern inside. The geometry I am working with is a polygon. I am aware of how to change outline ...
3
votes
2answers
319 views
How to preserve the color of a line pattern fill color in categorized vector layer?
I am applying different colors to a vector layer. Now I wanted to improve it, and get some items also with a crossed pattern. I want to have the hatching black, and the colors remaining. All I can get,...
3
votes
2answers
1k views
Creating polygon fill as seen in QGIS?
The polygon fill for 'Urban parcels' in the following .gif animation looks really cool.
http://changelog.qgis.org/media/images/entries/5817785cf3d18db78669c2eb2c2be0cf606c3783.gif
(See also: http://...
7
votes
2answers
2k views
Change symbols outline color without losing fill pattern
I have defined a layer symbology like shown in the screenshot below (categories are applicable laws however).
The layer symbology is defined like this i.e. (no pattern fill):
For these three ...
