Questions tagged [geometric-network]
A geometric network is a set of connected edges and junctions (nodes) along with connectivity rules that are used to represent and model the behavior of a common network infrastructure in the real world. Geodatabase feature classes are used as the data sources to define the geometric network. You define the roles that various features will play in the geometric network and rules for how resources flow through the geometric network.
183
questions
1
vote
1
answer
75
views
Identify larger diameter pipe flowing into lower diameter pipe in Geometric Network
I have a sewer geometric network and ArcGIS 10.8.
Is there a way to identify where larger diameter pipes are flowing into smaller diameter pipes?
I can identify connected pipes that have a different ...
- 785
0
votes
0
answers
45
views
Calculating Length of Polylines in Miles Based on Individual Point Features
I am using ArcMap 10.8.
I may be trying to do too much in one query, but I'm hoping there is a way to do what I'm trying to do without repeating the process 1,657 times.
I am trying to analyze the ...
2
votes
1
answer
78
views
pgr_withPointsCost returns incorrect table values
I have been struggling with getting pgr_withPointsCost to output a correct cost table for months. I have created a routable network, ensured the network is connected, created a poi table with all the ...
- 1,005
0
votes
1
answer
359
views
Tracing a specified distance along a network using ArcGIS Pro
Using ArcGIS Pro 3.1.
I have some starting points snapped to a network of river lines (purple in image). I would like to trace exactly 500m away from these points in either direction as below (red), ...
- 448
2
votes
0
answers
460
views
Connecting points with closest points (lines) avoiding polygon using QGIS
How can I connect multiple points with the closest line or point of the network avoiding polygon (land or sea) in QGIS?
There are over 4000 points that have to be connected this way so it would be ...
- 23
1
vote
1
answer
689
views
Using Trace Network Selection in standalone script in ArcGIS Pro
I am trying to create a script that allows me to to set various starting points on a network. Then perform an upstream trace and export the selected lines to a new feature class. No matter what I try ...
- 143
4
votes
1
answer
2k
views
Creating centre line of odd shaped polygon in QGIS
I'm trying to calculate a center line of an odd shaped polygon. When I've used the Polygon Tool 'Centerlines' with the setting 'All' is doesn't create center lines for all of the polygon, only part of ...
- 531
1
vote
1
answer
185
views
ArcGIS Trace Geometric Network - Get/add sequence number for lines
I'm using ArcGIS 10.2.2 python 2.7
We have large electric grid dataset, and we want to know which OHL or Cable is first to leave from transformer(Flag) which is second and so on.... arcpy....
- 399
0
votes
0
answers
35
views
Limitations of geometric networks in ArcMap (Cost Calculation)
I am working with a point dataset and a street network within a geographic region.
This region is divided in sub-divisions for which I want to calculate single networks within their area.
Every single ...
- 65
1
vote
0
answers
52
views
Setting up a rule to connect two points that intersect two connected, but separate line features
I am a relatively junior user of QGIS (currently using QGIS 3.18.1-Zürich). In the picture below is a scenario where I would like the intersected points between a stream (each separate stream line ...
- 1,005
0
votes
0
answers
37
views
Adding multiple sources to geometric network using ArcMap
I am using ArcMap.
I would like to identify all points that are on a river within 10km downstream of a starting point. I have multiple starting points and would like to do this from each of them.
I ...
- 1
1
vote
0
answers
86
views
Using ModelBuilder to update feature line length
I maintain a network of lines (geometric network) in an enterprise geodatabase and would like to automate the updating of a field after I complete my editing. The goal is to run the script nightly on ...
- 387
1
vote
1
answer
211
views
Using Trace geometric network in ArcPy script runs out of memory
I have written a short script to trace a geometric network representing rivers and creeks upstream from a number (10000~) of road intersections that are potential blockers to migrating fish. What we ...
- 69
0
votes
1
answer
227
views
Getting geometry network data from File Geodatabase
I have a GDB file with the power distribution utility data set. I was able to get data (File Geodatabase Feature Class) from the GDB file by using QGIS's OpenFileGDB. The remaining information which I ...
- 1
1
vote
0
answers
35
views
Attribute network features (lines) with data from their endpoint
Goal
To prioritize water lines in a network based on the building they service
Detail
I have a shapefile of water lines in a region. The lines are split at their vertices and form a network (more or ...
0
votes
1
answer
120
views
pgr_createTopology does not create vertices at every end of the lines of a street network
I am using pgRouting with a street network. I added lines to the network that represent straight lines from destination points I am interested to the nearest street using ST_ShortestLine(). Now I ran ...
- 1,230
0
votes
1
answer
291
views
GIS network tracing - water network
I have been trying to find out if it is possible to trace through a water network that will consist of line features representing water mains. Tools exist in both QGIS and ArcGIS to help with this and ...
- 611
1
vote
1
answer
287
views
Copying feature datasets weekly from EGDB to EGDB (geometric networks included)
I've been trying find a way to copy a few select feature datasets from our main production Enterprise geodatabase environment to a second Enterprise geodatabase. These datasets include geometric ...
- 11
1
vote
0
answers
185
views
Finding the LineString Corresponding to a Certain Road in a Roads Database
I am using tiger line road data to find roads that runs through certain points. I know what road is immediately next to the point by the road name and road type. What I currently do is grab all the ...
- 231
1
vote
1
answer
389
views
Trace upstream/downstream for multiple pairs of points in ArcMap
I have two point layers, one is set of origin points and one is a set of destination points, each with 608 points. Object IDs match the origins to the destinations. The points are all snapped to the ...
- 11
0
votes
0
answers
34
views
Check geometries of line
I am working with hydraulic network. I have a pipes network. I am trying to check it's geometries.
I have searched many related documents, I know topolygon tool and check geometries, but it only ...
- 111
1
vote
0
answers
247
views
ArcPy for loops increase duration with each iteration
I am running an ArcPy script with IDLE 2.7
For each line in a geometric network, it traces the path to a fixed location from that input line.
For each input line, it does this trace with all other ...
- 942
2
votes
1
answer
188
views
Using more than a single layer as barriers in arcpy.TraceGeometricNetwork_management()
I am working on script that iterates through trace flags and traces upstream.
For each trace flag, I have selected features from multiple layers in the geometric network that I want to act as ...
- 942
0
votes
0
answers
132
views
Spatial Adjustment of Many Points in Geometric Network
I have been receiving surveyed water valve data and editing our point feature class accordingly. The current procedure is to use the attribute transfer mapping tool and click from source layer to ...
- 1
1
vote
1
answer
345
views
Slow SDE Performance After Append - Geometric Network
I had an odd thing happen today, I do almost daily appends to our fiber network (fiber, splices, etc) and usually, it goes smoothly and with no complications. For some reason, I had an Append stall ...
- 535
0
votes
0
answers
82
views
Batch network tracing?
I have a large (3,000+) set of drainage polygons that I derived from the ArcHydro Stormwater Processing workflow. I would like to aggregate them based on the geometric network elements they contribute ...
- 1
1
vote
0
answers
132
views
Fixing Discontinuous Stream Networks using ArcMap
I am currently working on a project in ArcMap 10.6.1 involving urban sewershed delineation, however, I am stuck with a discontinuous stream network. I took a LiDAR DEM from NOAA and subjected it to ...
- 11
3
votes
1
answer
380
views
Identify layers in an .mxd that are network elements feature types
I need to create new feature classes from all layers in an .mxd, and also create a new .lyr file for each of the newly created feature classes that retains the symbology of the original map layer. The ...
- 960
1
vote
1
answer
206
views
Create Geometric Network Geodatabase Failed
I recently attempted to run the Create Geometric Network Geodatabase tool which is part of a water outage template download and process offered via the ArcGIS Solutions Deployment Tool within ArcGIS ...
1
vote
1
answer
55
views
ArcGIS: Extract portion of a geometric network that exists 30 mi downstream of intersection with another layer
I have flow lines for streams. I've made them into a geometric network. The streams intersect with a rail network. I want to find all of the points of intersection and then get all of the flow lines ...
- 33
0
votes
0
answers
62
views
Automatic creation of polygons
How do you automatically create adjacent polygons in QGIS whose size depends on an attribute of another layer?
I have a layer with community areas and the corresponding number of inhabitants and ...
- 406
1
vote
0
answers
272
views
What is "Current Status" (IMMCurrentStatus) in ArcFM Downstream Trace?
I'm trying to develop a custom downstream trace Addin for ArcGIS using .net (C#) Miner.Interop.Framework Assembly.
I'm using TraceDownstream Method from the ArcFM Desktop Developer Guide and ...
- 109
3
votes
1
answer
318
views
Pipes do not connect to each other - geometric network
I have created a geometric network in ArcGIS for Desktop. Some of the pipes are not logically connecting to each other even though they appear to geometrically intersect.
Can anyone tell me how to ...
- 75
0
votes
1
answer
457
views
Geometric networks (networkx) in PyQGIS
I'm working with code from the Disconnected Islands plugin in QGIS x64 and Python 3. Normally, the plugin uses networkx to create a geometric network and ends by writing the FID of features with no ...
- 477
3
votes
1
answer
421
views
Disconnected features in Python, QGIS
I'm working with code from the Disconnected Islands plugin in QGIS x64 and Python. Normally, the plugin ends by writing the FID of features to a CSV and their corresponding network group ID.
Instead, ...
- 477
0
votes
0
answers
46
views
Using Geometric Network toolbar?
I've been using the Geometric Network tools for quite sometime now to trace electric distribution networks for my job and all of a sudden when try to trace the circuits and connected features from ...
- 1
2
votes
1
answer
79
views
Added lines to an existing feature class and geometric network are not included in a geometric network trace
I have a stream layer for a watershed. These streams are topologically correct where each line's geometry stores the correct flow direction and each end connects to the start of the next downstream ...
- 10.2k
2
votes
0
answers
98
views
Creating Hydro Hierarchy in ArcGIS Desktop? [closed]
We recently ran at work into this model created by ESRI for the rivers in the US:
https://maps.esri.com/rc/radial/index.html
Code: https://github.com/richiecarmichael/Esri-Hydro-Hierarchy
In order ...
- 184
2
votes
1
answer
346
views
Calculating Distance from Outlet to Dam(s) using ArcGIS Desktop?
I am trying to carry out what should be a relatively simple analysis of river network fragmentation by dams. Similar questions have been asked as:
Obtaining length of river upstream of points up to ...
- 665
4
votes
2
answers
440
views
Arcpy code to loop trace geometric network give out of memory error
I have a distribution of points on a geometric network. I have code to select a point, run an upstream trace on the network, select intersecting polygon features, sum some attributes from those ...
- 10.2k
1
vote
1
answer
104
views
Adding new field to feature class?
I'm using one of the esri model sewer system geodatabases. It includes empty feature classes and a geometric network. i need to add a field to one of the pre-made feature classes, but it won't let me....
- 807
2
votes
1
answer
501
views
ArcGIS Trace Geometric Network Tool Trace using Find Common Ancestors gives error
I have a geometric network stored in an ArcGIS 10.5 geodatabase. These lines represent all the river paths in a watershed. The lines associated with this network have the required flow direction ...
- 10.2k
2
votes
1
answer
125
views
Drawing a map using time as metric instead of distance in QGIS
I am used to drawing maps in QGIS and overlaying on top them a road network map showing the distance between places, its a useful way of showing information about roads.
But I am aware that its not ...
- 349
2
votes
1
answer
78
views
Storm water Geometric Network Tracing Catch Basins
I am using ArcGis 10.3 and am trying to trace a geometric network from a catch basin to a catch basin lead to a mainline ultimately to a storm pond.
Flow direction is set correctly using digitized ...
- 103
7
votes
3
answers
784
views
PostGIS recursive query in order to find the longest connected subnetwork in my line network
Let's said that I have this line network:
The goal is to find the longest connected subnetwork.
So I want to find all the line's ID that are connected to the line with the ID = 1 because I know that ...
- 1,724
2
votes
2
answers
814
views
How to create "roof line" for a general polygon area?
I have a polygon with an arbitrary shape ( assume that it is well-formed with no self intersection, no duplicated points etc), and I need to subdivide the polygon into sub-polygons like how one would ...
- 928
0
votes
1
answer
58
views
Count features on geometric network between two points
What geoprocessing tool or process will let me count the point features on a geometric network between a specified start and end point?
0
votes
1
answer
404
views
Why are multipart features not allowed in Geometric Networks?
I'm beginning to familiarize myself with Geometric Networks in ArcGIS Desktop, and according to About Verify Network tools and commands, multi-part features are not allowed, but they do not explain ...
- 463
0
votes
0
answers
155
views
Create a Geometric Network - Error
I'm trying to create a geometric network in a FILE GEODATABASE, but I get:
Error: Cannot create geometric network. The selected feature dataset
does not contain any feature classes which can ...
- 128
2
votes
0
answers
352
views
Cluster Points on spatial network in R/QGIS
I am searching for a method for clustering spatial points along spatial lines.
The points are connected to the lines.
I tried nearest neighbour clustering and gProject/gInterpolate from the rgeos ...
- 41