Questions tagged [grids-graticules]
Grids and Graticules include reference grids, measured grids and graticules
120
questions with no upvoted or accepted answers
5
votes
0
answers
39
views
Wrangling precision in QGIS with a hypothetical planet
I'm a tabletop roleplaying gamemaster wanting to use QGIS to help organize my notes according to place. GIS addresses my need to store notes and other data that may be anywhere from a few feet from ...
- 151
5
votes
0
answers
653
views
Local grids with rotated north in QGIS
Like many people in geology and archaeology I need to work with local grids that have eastings and northings from a specific reference point, and typically have a difference alignment/direction of ...
- 51
3
votes
0
answers
53
views
QGIS grid doesn't fit
I downloaded the German 1km grid and also create a 100m grid with the same EPSG code
EPSG:25832 - ETRS89 / UTM zone 32N
but the created grid doesnt have the same coordinates. Why did this happen?
...
- 121
3
votes
2
answers
882
views
Graticule will not display in layout view
Problem:
I am trying to create a graticule for a map in ArcMap 10.7.1. When I create the graticule and hit "apply", the graticule does not display in layout view or when I export the map.
Steps to ...
- 225
3
votes
0
answers
251
views
Stop Grid Coordinates Overlapping in Print Layout
I have created some data driven pages in the print layout (controlled by atlas) using QGIS 3.4. The grid spacing is set to a fixed interval (20m). This works fine until one of the pages is located in ...
- 41
3
votes
0
answers
535
views
Custom formatting coordinate grid using QGIS
I am custom formatting my coordinate grid.
Is there a way to change the following formula so that the output comes with a decimal and suffix?
substr(@grid_number, length(@grid_number) -6,5)
The ...
- 31
3
votes
1
answer
3k
views
Centroids of each grid cell
I have a grid created by mean the following script:
# My grid [using package 'sf']
worldGrid <- st_make_grid(x = worldMap, what = "polygons", cellsize = 10)
worldGrid <- st_sf(idcell = ...
- 345
3
votes
0
answers
176
views
QGIS clip grid frame to shape?
I am working in QGIS and would like the grid frame to align with the edges of my conic projection region. Is there a way to do this? In arc it is very straightforward but I have yet to find a method ...
- 257
3
votes
0
answers
87
views
gdal_translate to get full vector extent of geo spatial referenced PDF
I am creating GeoTif images from a USFS geospatial referenced PDFs using gdal_translate. I turned off all of the layers that I did not want and it produces a GeoTif of just the center window of the ...
- 101
2
votes
2
answers
290
views
Grids of basemap when exporting PDF in QGIS print layout
I've been getting perpendicular lines through my basemap imagery in my QGIS layout exports to PDF (see photo).
Some notes:
The lines do not appear on the export screen.
I have guides built into the ...
- 173
2
votes
0
answers
194
views
Points interpolation on a polygon geometry
I would like to know how to interpolate point data on a polygon geometry.
I have two PostGIS tables:
the first one contains hourly rain values evaluated in the nodes of a regular grid (specified in a ...
- 21
2
votes
0
answers
30
views
Randomly filtering points in unevenly distributed point dataset?
I have a vegetation plots dataset which has unduly high concentrations of plots in certain parts of the dataset. I want to even out the concentrations of points so that there is a more even ...
- 69
2
votes
0
answers
807
views
OpenLayer's graticule doesn't properly work
I am making a map of Krasnoyarskiy krai subject of Russia. I have defined a custom projection that should be used for this area using proj4 string. I need to show lat/long grid only for this territory....
- 169
2
votes
0
answers
1k
views
Create a grid in R, change in cell size displaces position of grid
I'm writing R script which will allow users to overlay a grid on their data in a new projection with the option of defining the size of the grid cell. This seems to work fine, however, when I plot two ...
- 21
2
votes
0
answers
172
views
What projection to use to create aligned GB and Ireland OS Grid map
I would like to create a map like the following:
It displays the 100km grid square systems used by both UK and Ireland.
I have created the 100km grid squares using the TomBio tools plug in, however,...
- 329
2
votes
0
answers
62
views
Issue with vector grid and calculating area QGIS
I'm trying to determine the area of occurence from a large polygon superimposed onto 2km x 2km grids. The goal is to have a slightly coarser answer then a straight area of the original polygon as the ...
- 21
2
votes
0
answers
251
views
Creating grid in ArcGIS Pro that looks exactly same as Corner Label Grid in ArcMap?
When creating a grid in ArcMap I would choose the Label Style Format of Corner label in the Grid Properties dialog box.
I am attempting to create the same grid in ArcGIS Pro, I understand you have to ...
- 21
2
votes
0
answers
25
views
QGIS 2.18 - how to plot a new point a certain distance and az from another point
I'm trying to figure out a way to plot a new point (or series of points) along a given az and a fixed interval. Essentially, I'm trying to build a grid for soil sampling.
ty
- 21
2
votes
1
answer
236
views
Add leading zeros to data frame label
This is in ArcMap 10.0.
When using data frames to label UTM coordinates, I'm sometimes asked to add leading zeros (e.g., 590 would become 00590) to the tick or line labels of the data frame. I'd ...
- 29
2
votes
0
answers
276
views
Creating Point Grid over selected polygon using OpenLayers 3?
I am trying to create an equally spaced grid of points. But these points must only be on land.
I was using the polygon overlay of countries to see if I can use that as a mask.
I have also tried ...
- 33
2
votes
0
answers
460
views
Creating Polygons of specific sizes
I am very confused! I have tried this afternoon to create a polygon of a set size, namely 30m x 1.8m. I need 33 of these set over a grid (which I have created on a vector layer).
I've read ...
- 211
2
votes
1
answer
316
views
Drawing graticule with GDAL/OGR?
I'm trying to generate a graticule with user-defined range of latitude, longitude, and interval; however, my code only displays one line of latitude and one line of longitude when loading it in QGIS. ...
- 21
2
votes
1
answer
2k
views
Finding British Columbia township grid?
I'm looking for a shapefile of the Dominion Land Survey township grid for British Columbia. Where might I find this data?
- 59
1
vote
0
answers
35
views
How to create point-centered cells grid with geocube
I want to create a tiff file starting from a numpy array which contains temperature data points in the format lat,lon,T2
My data array (the columns contain respectively cell number,temperature,lon,lat)...
- 49
1
vote
0
answers
31
views
3D NetCDF data visualization in IDV
I am using Unidata IDV (Integrated Data Viewer) to visualize geospatial data. The data is in NetCDF format and the metadata as such:
netcdf tn {
dimensions:
ansi = 5 ;
plev = 3 ;
Lat = 160 ...
1
vote
1
answer
50
views
How to count features from multiple different layers in a grid in ArcGIS Pro 3.1?
The multiple features (points and polygons) are all a toxic chemical from different sources. The grid was created using the 'Grid Index features', so it is a polygon. Some grid cells have no features, ...
- 11
1
vote
0
answers
165
views
Why does the right side coordinate does not appear?
I was working on QGIS 3.28 and the CRS is WGS 1984 Web Mercator. Apparently my right side coordinate doesn't appear in scale 1:750.000.
But it appears when I change the scale to 1:2.000.000 or above.
...
- 11
1
vote
0
answers
29
views
When I add a grid "Layout" the units don't match with my map's
When I add a Grid in Layout and select "Map units" and Interval the units still don't match
- 11
1
vote
1
answer
294
views
Create a grid for more than one country in R
Some time ago I posted my own answer to create a grid inside a country to be used in kriging interpolation:
0........0.kriging error messages, grid file problem ? (automap, gstat)
This grid was for ...
1
vote
1
answer
40
views
Retrieve scale-value of a specific map in specific print-layout for using this scale in model-builder
I made a model with the model-builder which create a grid with its height- and width-size dependend on the size of a certain map in a certain print-layout. It allready works fine.
But that for I need ...
- 11
1
vote
0
answers
154
views
Custom map grid showing township/range in QGIS Composer
I am trying to create a map layout with the township/range grid labeled around the map. I created a grid with tick marks every 6 miles, but am not sure how to get annotations of each township/range. I ...
- 69
1
vote
0
answers
330
views
Ordnance Survey 100m Grid shapefile
I want to add a 100m (hectare) grid layer to my UK map and have been trying to use the FSC's OSGR tool. It is incredibly slow to process, therefore I'm wondering is there are any shapefiles available ...
- 11
1
vote
0
answers
105
views
QGIS Change Grid labels and scale
I create a map in QGIS, in which I added Grids with labels and Scale.
So in the map the scale is not equal to interline grids.
I know it is related to projection system and location. but how do I fix ...
- 41
1
vote
0
answers
96
views
Setting coordinate Grid with map composer in QGIS
I have been trying to display a coordinate grid on my map with QGIS.
I have a shapefile projected to UTM zone 34N. I have set the CRS to "WGS 84 Zone 34N" on the main properties tab and the ...
- 327
1
vote
0
answers
350
views
Generate essential grid covering polygon with OGR & Python
I'm trying to come up with a method to recreate the type of grid shown below.
The grid is using a custom projection measured in meters. each cell is 256 x 256 meters.
Ideally I'd like to easily use ...
- 461
1
vote
0
answers
262
views
QGIS Print Layout Grid Reference Numeric Format
Using QGIS3.14
The default style of grid labels is single size digits, e.g. 251000E and 5897000N.
I wish to show the grid labels in a format similar to Ordnance Survey with the 51 of the easting and ...
- 937
1
vote
0
answers
50
views
How to impute country to a global population grid?
Have following gridded population data (available from the History Database of the Global Environment, HYDE)
ftp://ftp.pbl.nl/../hyde/hyde3.1/hyde31_final/1980ad_pop.zip
It looks like this:
ncols ...
- 19
1
vote
0
answers
76
views
Raster Polygon Overlay Analysys
I have a fishnet polygon feature class and a land cover (40 categories) raster. Both cover a large area.
I seek to:
a) calculate the area of each land cover type category (40) inside of each Grid ...
- 21
1
vote
0
answers
76
views
What is the difference between a N96 and N96e grid space?
Global land-use and meteorological raster datasets are often gridded using N96 or N96e grids. I suspect that they are slightly different but I cannot find information on how they differ. Both split ...
- 111
1
vote
0
answers
61
views
Total number of cells on each MGRS grid level
I'm trying to figure out how MGRS grid looks like in a whole. I've already read wiki page and some articles but still didn't find the answer to my question.
As I understand:
level (100 × 100 km ...
1
vote
0
answers
147
views
How can I get township and range edge labels in QGIS 3.4.13-Madeira
I've created PLSS edge labels before with ESRI and older QGIS and don't remember this being all that hard, but for some reason I'm lost trying to get it done with the newer version. The PLSS data is ...
- 11
1
vote
0
answers
78
views
QGIS Graticule at Print Layout starting at from 0
I would like to add a graticule with coordinates to my map. However, when I add a new grid and modify it the graticule appears but it always starts at 0 and not from its real value.
How could I fix ...
- 11
1
vote
0
answers
111
views
Equal geographic coordinate grid intervals
Is there a way of creating an equal geographic coordinate grid interval in QGIS print composer? I tried editing the interval and offset but it does not give equal interval like 121°14'0" then 121°14'...
- 11
1
vote
0
answers
419
views
How to get a grid 500m x 500m on map composer
I need to make a map on map composer, with a grid layed on it which is 500m x 500m. however the only way I could find of doing this was by adding a grid to my map, found within item properties.
This ...
- 797
1
vote
0
answers
72
views
Vector to grid - Computing statistics by grid cells
I have a vector point data from drifting buoys (speed, direction, sst, slp) that I want to analyse in a grid. What are the right tools for this?
Example of my points data below. Each point has the ...
- 11
1
vote
0
answers
709
views
How to create one grid from specific set of points using QGIS?
I need to create one grid/fishnet from a set of points (coordinates). I tried to do it with the point to path tool following this three steps:
1-Vertical's rows: I numbered the points in the ...
- 11
1
vote
0
answers
294
views
Precision Ag and UTM declination
I've written an open source Precision Agriculture application called AgOpenGPS that does everything from auto steer, to mapping, implement and section turn on/off, auto headland turns and more. It's ...
- 11
1
vote
0
answers
204
views
Grid creation with specific rows and columns
I have a shapefile for a property boundary and i want to create a grid over this boundary. However I want to be able to specify the number of Rows and Columns, I would also like each individual grid ...
- 11
1
vote
0
answers
191
views
Calculate Grid Convergence Angle within ModelBuilder Model
I am trying to use the 'Calculate Grid Convergence Angle" tool (from Cartography toolbox -> Data Driven Pages) into ModelBuilder. The tool is pretty simple -
(1) import,
(2) remove no data
(3) ...
- 11
1
vote
0
answers
36
views
Listing features and their respective map grid in QGIS
I am trying to list map features and the Reference Grid they fall into. The grid is setup in the Print Composer as a 50mmx50mm grid over a 400mmx400mm map with Cells Labeled as 1A, 1B, etc.. I didn't ...
- 1,433