Questions tagged [landsat-8]

Use this tag when asking question related to the 8th satellite in the Landsat program.

65 questions with no upvoted or accepted answers
Filter by
Sorted by
Tagged with
4
votes
0answers
328 views

Improve washed out blurry composite Landsat 8 image in QGIS

I want to create a composite image using Landsat 8 bands. I followed the steps to do so (creation of virtual layer, high resolution, separate) and adjusted the bands' colors (red 4; green 3; blue 2) ...
4
votes
0answers
240 views

Disable readdir on open in gdal_translate when using /vsicurl/

I'm using /vsicurl/ file handler to read Landsat 8 data out of S3. Following GDAL documentation "to minimize the total number of HTTP requests outside of the target GeoTIFF file" I set ...
4
votes
0answers
533 views

How to remove black pixels in Landsat image

Does anyone know how I can remove these black pixels around the edge of this Landsat image? They appeared when I layer-stacked the bands in ERDAS IMAGINE - they were not there in the separate band ...
3
votes
0answers
488 views

Remove near black borders on Landsat 8 overview images

I want to eliminate near black pixels around edges of Landsat-8 overview. I'm interested in doing it not for the entire image but some extent, so I clipped it. I tried using GDAL nearblack utility, ...
3
votes
0answers
408 views

Image classification for a study site falling over two adjacent Landsat 8 scenes (qGIS or ArcGIS)

This question concerns work-flow rather than specific methodological problems. I will be using GRASS to classify Landsat 8 images to create a vegetation map for a study site that happens to fall over ...
2
votes
0answers
35 views

Surface Temperature + Air Temperature in Landsat image comparisons

Quick question about relating Landsat Surface Temperature to locally recorded Air Temperature on a given day: Are differences in local air temperature captured by the Landsat ARD ST imaging process? ...
2
votes
0answers
128 views

Calculating indices such as NDVI or NDSI on Landsat 8 imagery whose pixel type is 16 bit signed integer?

I am trying to calculate an NDSI (Normalized Difference Snow Index) using Landsat 8 OLI level 1 imagery atmospherically corrected in ERDAS ATCOR using raster calculator in ArcMap. NDSI is used to to ...
2
votes
0answers
99 views

Why don't Landsat 8 image extents match WRS2 polygons?

The question doesn't need too many explanations, but the following picture illustrate the problem very well. I sort of understand why they don't match on width. The satellite drifts away of its path ...
2
votes
0answers
201 views

Computing stats with data ignore values - ENVI classic

I'm using ENVI classic (5.4.1) and trying to compute basic statistics from a Landsat-8 scene. When I mask out certain pixels (water set to 'No Data', for instance) the built-in ENVI statistics still ...
2
votes
0answers
204 views

ESPA-API for Landsat scene downloads

I've been trying to automatically download Landsat scenes with espa-api ( https://github.com/USGS-EROS/espa-api) However I'm having a big issue with this api right now, that is the long waiting time ...
2
votes
0answers
179 views

i.atcorr - Landsat 8

I am trying to apply atmospheric correction to Landsat 8 scenes using i.atcorr. After tons of tests I am still struggling with the correct input and output range. The results deriving from radiance as ...
2
votes
0answers
38 views

minimum number of pixel points for regression on atmospherically corrected satellite images

I am performing atmospheric correction on a Landsat 8 image using different methods to check which one works best (in order to proceed with further/subsequent analysis). Wondering if it's okay to use ...
2
votes
0answers
134 views

Layer Stack 6 Landsat8 bands

I have 6 images from Landsat 8 (Green,Red,NIR,SWIR1,SWIR2,NDVI). When I want to layerstack them with "Merge" I always get a result tif which is just black and white, however I can see that all 6 bands ...
2
votes
0answers
377 views

Right Orfeo Toolbox Segmentation input

I made this tutorial. I used Landsat 8 bands (1-7), which I atmospheric corrected with DOS and converted to 8-bit. After that I layer stacked the pre processed band (1-7), clipped a little part with a ...
2
votes
0answers
1k views

Resample Landsat 8 to 60m Resolution

I have two Landsat images for the same study area. One of them in 1975 (Landsat 2 MSS with 60m resolution) and the other in 2014 (Landsat8 OLI with 30m resolution). I want to do change detection ...
1
vote
0answers
11 views

Image error polynominal transfomation

I'm georeferencing a Landsat 8 oli no QGIS trip. I include the control points and the system calculates the residuals for each point. At the end it indicates the polynominal mean error of the ...
1
vote
1answer
30 views

Multiple Landsat 8 images shown for a single path, row, and date in GEE

I am trying to export an image above the Yenisei Delta using Google Earth Engine. I have its path, row, and date, and when I filter the Landsat 8 TOA imagecollection, I am able to find this image: ...
1
vote
0answers
33 views

Removing pixels in band using an inequality in Google Earth Engine?

My current code: https://code.earthengine.google.com/5ff735e22e894a6c1b5ddc628cfccae7 I have an inequality from line 99-106. I want this inequality to assign a value of 1 to all pixels that satisfy ...
1
vote
0answers
36 views

Landsat 8 cloud band: how to understand their (bit) coding?

I am trying to understand how to use the Lansdat 8 cloud quality band. The user guide L8_Surface-Reflectance-Code-LASRC-Product-Guide.pdf does not explain much, but just gives tables (Table 7-1, 7-2 ...
1
vote
0answers
234 views

Normalizing negative pixel values in a GeoTIFF with GDAL in Python

I have a GeoTIFF pulled from Google Earth Engine. I'm using the following code to see the red values of each pixel: from osgeo import gdal gdal.UseExceptions() ds = gdal.Open(myfile) band = ds....
1
vote
0answers
45 views

Get a large area landsat 8 metadata from earth-engine

Obviously the code below will returned null because there's no picture in landsat 8 will contain such a large area. #python geometry = ee.Geometry.Polygon( [[73.0, 25.0], [73.0, 49.0], ...
1
vote
0answers
243 views

Centroid latitude/longitudes of Landsat pixels

I was successful in getting centroid coordinates for pixels in Sentinel 2A image (10m by 10m). But Landsat (30m by 30 m) posed a problem. from osgeo import gdal # Open tif file ds = gdal.Open('C:\\...
1
vote
0answers
234 views

How to preprocess and remove noisy data from Landsat-8 image Bands for ndvi time-series analysis

I'm working on satellite image processing, I'm calculating NDVI for time series analysis and vegetation prediction. I'm having a tough time removing the noisy data like, Cloud coverage Haze Cloud ...
1
vote
0answers
129 views

RS&GIS plugin produces no outputs

I'm trying to look at some landsat images and thought I would give the RS&GIS a go, as a way of creating true and false colour composites. I'd like to visually inspect the vegetation my project ...
1
vote
0answers
202 views

Extracting data from satellite tiff file in .nc format?

I'm working with Landsat-8 satellite images and sometimes I need to open real values (numbers) for example as a simple excel table (or similar). These my steps for getting TOA reflection in QGIS: ...
1
vote
0answers
517 views

How to export image on google earth engine for large area?

The area that i have been work have about 159695,938 km² and I am mapping the deforestion on this with NDVI. I had to use 2 years to remove all the clouds (eg. 2015-01-31 , 2016-12-31) using a reducer....
1
vote
0answers
250 views

Error in GRASS i.pansharpen - No images are generated

I´m trying to run the algorithm "i.pansharpen" in QGIS 2.18.8 , Win. 7_64bit. I´ve tried with rasters (Landsat 8 images) in 8bit and 16 bit unsigned and differents methods (brovey and IHS) but i ...
1
vote
0answers
21 views

Finding Land Surface Temperature in across 4 continuous images in ArcGIS 10

I'm trying to find Land Surface Temperature of 4 continuous Landsat8 images in ArcGIS. I was able to calculate them as individual panels (using these two videos as guidelines: https://www.youtube.com/...
1
vote
0answers
63 views

RGB Image Metadata

How to extract metadata of landsat-8 multi spectral image.(RGB Formation). I have processed the image, taken out RGB Bands, cropped it and now want the metadata of the combined stack/brick. Using ...
1
vote
0answers
225 views

Landsat 8 mosaic

When I tried to mosaic two Landsat-8 images in ARC GIS 10.4, I found overlaps area after mosaic and it appears as sharp line and it looks like two images with different colors. I want to make them as ...
1
vote
0answers
100 views

view zenith angle of MODIS surface reflectance product and Landsat 8

I have a MODIS daily surface reflectance product (MYD09GA) which I'd like to validate Landsat 8 image with. I want to obtain pixels that only fall within the view zenith angle of Landsat 8 ( 0 - 7.5). ...
1
vote
0answers
238 views

Process Landsat8 data in AWS S3 from EC2 instance

I'm wondering what is the best way of processing huge amounts of Landsat8 images stored in the AWS S3 buckets from an Ec2 instance located in the same availability zone. Should I download the scenes ...
1
vote
0answers
194 views

Why are Landsat-8 derived NDVI values higher than SAVI values?

I have calculated NDVI and SAVI vegetation indices for a landsat-8 image. I am unexpectedly getting higher values for the NDVI than SAVI. What may be causing these unusual results? NDVI=0.46 SAVI=0....
1
vote
0answers
247 views

Enhancing/smoothing Landsat 8 image using ArcGIS Online?

I understand that Landsat 8 is 30m resolution, but is there any technique that can be used to smooth/enhance the NDVI or Agriculture Landsat layers in an ArcGIS Online (AGOL) web map? I have adjusted ...
1
vote
0answers
353 views

Pansharpening Landsat 8 tiles in Grass 7

I am trying to get some nice looking RGB images for visualization purposes, mainly using as background maps, from the Landsat 8 archive. I was following the tutorial provided by Markus Neteler at ...
1
vote
0answers
148 views

How to SELECT one day's scene (Landsat 8 scenes)

I have a huge dataset of raster in PostGIS. Each scene is divided into tiles (tile-size 500x500). I was trying to SELECT rast FROM landsat8 WHERE ST_Intersects(rast, polygon). It runs very slow, ...
1
vote
0answers
259 views

How to use USGS Bulk Download on EC2 linux Server?

I am interesting in downloading Landsat 8 rasters to an Amazon EC2 instance and would like to know how to do it. I already install USGS Bulk Download but I do not know how to use it in terminal mode (...
0
votes
0answers
19 views

NotImplementedError: Wrong number or type of arguments for overloaded function 'CoordinateTransformation_TransformPoint'

Hello I am new to working with GeoTiff data and I am trying to grab lat/lon values from a tiff image. Here is my code: import gdal import matplotlib.pyplot as plt import osr # open the dataset and ...
0
votes
0answers
9 views

Comparing Landast 8 Images?

I'm currently working with Landsat 8 OLI/TIRS Level-2 Data Products - Surface Reflectance and I would like to compare different landsat images from different places on earth. I was wondering if pixels ...
0
votes
0answers
6 views

Calculate per pixel Landsat Relative Azimuth Angle (RAA)

Iam Trying to Generate Landsat-8/OLI NBAR images. Given that USGS Landsat-8 Angtool can generate per pixel view_zenith, view_azimuth, sun_zenith and sun_azimuth angle bands. Is Relative Azimuth Angle ...
0
votes
0answers
18 views

Measuring ground displacement between two Landsat-8 scenes

I'm trying to measure the 2D horizontal ground displacement between two Landsat-8 scenes. This problem has been well addressed using sub-pixel correlation software outside of Earth Engine, so I ...
0
votes
1answer
19 views

Merge ImageCollections with different pixel size

I want to combine 2 different Image Collections (i.e. Landsat8 and Sentinel-2), and I want to combine them to a unique ImageCollection (and then run the function qualityMosaic()). However, they have ...
0
votes
0answers
10 views

Composite Bands in QGIS using SCP equivalent to ArcMap's Composite Band

I'm trying to generate a composite image from three Landsat 8 bands. I don't know which tool to use to achieve the composite that can be derived using ArcMap's Composite Band tool. I see at least ...
0
votes
1answer
13 views

ERDAS mosaicPro from 2D view reference layer is not displayed on top

I am having an issue using the ERDAS mosaicPro from 2D view tool. I am using ERDAS 2015. I have two separate Landsat 8 file bands. Band 1 from one date and Band 1 from another date. I have ran the ...
0
votes
0answers
23 views

Pansharpening for Landsat 8 surface reflectance in Google Earth Engine

I am trying to apply a pan-sharpening process to Landsat 8 surface reflectance product ('LANDSAT/LC08/C01/T1_SR'), however it lacks the panchromatic band, any one has tried using the Landsat 8 TOA ...
0
votes
0answers
22 views

One or more dropped items were invalid and will not be added to the control - Color Balance Mosaic Dataset

I am having some issues dropping a processed Landsat 8 image into the Color Balance Mosaic Dataset. The image has been processed through the following: Atmospheric correction QGIS Pan-sharpening ...
0
votes
0answers
24 views

Getting out of range output for EVI calculation based on Landsat 8

I will be using this stuff for an MSc project where I am looking at changing EVI over a four year timeperiod in 4 sites in the Amazon to look at changing rodent species abundances. I have got to the ...
0
votes
0answers
55 views

Landsat bands have negative values

I have downloaded Landsat 8 OLI TIRS collection 1 level 2 data. I know that Level2 has been converted from DNs to TOA reflectance already. However, when I open it in ArcMap, Band 1 and 2 have values ...
0
votes
0answers
12 views

Eliminating superfluous raster values using ArcMap?

I have used the raster calculator in ArcMap to calculate the salinity index (RED-NIR/RED+NIR Khan et al.) over a portion of land which was disturbed by the construction of a solar farm. Landsat 8 ...
0
votes
1answer
35 views

Didn't show all the column while export the CSV file while using Google Earth Engine

I'm trying to calculate the water areas and the statistics of each band for each water areas to see if there are seasonal changes. The exported .csv file only have the columns ("GNIS_ID","AreaSqKm","...