Questions tagged [matlab]
MATLAB® is a high-level language and interactive environment for numerical computation, visualization, and programming.
105
questions
0
votes
0answers
17 views
MATLAB web map browser overlay GeoTIFF image
How can I use MATLAB web map browser to load and overlay with a give transparency a GeoTIFF image :
% web map browser :
nasa = wmsfind('nasa', 'SearchField', 'serverurl');
baselayer = refine(nasa, '...
0
votes
0answers
17 views
Creating georeferenced Sentinel-2 image in MATLAB
I am trying to create a georeferenced NDVI map using MATLAB from Sentinel-2 (jp2 format) images (a coordinated image that each pixel has latitude and longitude). I read many resources about this issue ...
1
vote
0answers
50 views
Create cross sections equally spaced in a poly line imported from QGIS to MATLAB?
I had to create an Excel sheet with each profile cross-section which gave me the coordinates and elevations from a poly line of 2300 m length, referenced from 5 different DGM, which composed the study ...
1
vote
0answers
46 views
Cropping Landsat images with shapefile in MATLAB
I want to crop several Landsat images, of different satellites, in MATLAB employing a shapefile.
For only one image, I could manage to do it properly.
But if I try the same with a second image, the ...
2
votes
0answers
125 views
Writing a GeoTIFF file that is rotated with respect to a projected coordinate system using Matlab's Mapping Toolbox
I've been prototyping some processing techniques for SAR images in Matlab. This requires importing a GeoTIFF file, and then exporting a file with modified data but the same spatial reference. I have ...
0
votes
0answers
21 views
TOA Reflectance and BOA Reflectance Matlab Sentinel 2
How to convert DN into TOA Reflectance and BOA Reflectance in MATLAB?
If I have to use Sen2Cor for do that. How can i use Sen2Cor in MATLAB?
0
votes
0answers
17 views
Matlab's geographicToDiscrete function does not return the correct col, row
I have a shapefile with points (in WGS84) that overlap with a raster layer (also in WGS84) and for each point I want to calculate the corresponding col and row raster coordinates. I work on Matlab ...
1
vote
1answer
177 views
QGIS: Clip Raster by Mask Layer-permanently remove black edges
I want to introduce geotiff images generated in QGIS by clipping ortho imagery to a shapefile into matlab. However, the clipped raster images come with black borders. I managed to remove them in QGIS (...
0
votes
0answers
41 views
Atmospheric correction of InSAR interefrograms
I am trying to apply GACOS service to correct atmospheric artifacts on InSAR interferogram.
In the GACOS manual provided with the GACOS_Ultility example, it is mentioned that data storage of the ...
0
votes
0answers
57 views
How to get pixel per meter in MATLAB
I have a vector shapefile which is in unit of 'Meter' presenting boundary of overall Germany. I am converting it into raster format based on each pixel representing 300 Meters respectively.
After ...
1
vote
2answers
68 views
Geospatial Analysis
How can I convert spatial information like the elevation, land use(source:corine land cover map), location of power transmission lines, etc to a 2D array of numbers like a 2D spatial array based on ...
2
votes
0answers
27 views
QGIS raster files not aligned due to different extent
I have a DEM file of building heights calculated from DSM-DTM in QGIS. Based on this DEM file, I generated a mask that indicates the presence of buildings in matlab. However, when I load the building ...
0
votes
1answer
118 views
Plotting data only inside polygon in MATLAB?
We can plot data with polygon in MATLAB as a data size of 651*1200*12
S.X and S.Y shows the X and Y values of polygon.
for i = 1:12
subplot(4,3,i)
pcolor(lon1,lat1,data(:,:,i)) ;
shading interp ;
...
1
vote
0answers
43 views
How to detect the edge of the the curve?
I'm using MATLAB edge function to find the edge of an item in a picture. It's easy to deal with some individual item, like:
I can use edge function to get the boundary
However, when the picture ...
-1
votes
1answer
818 views
Read raster data in Matlab
I have a GeoTIFF image (satellite image) and I need to read the values of every pixel to calculate the sum.
How do I do that?
I'm new in both Matlab and the geographic field.
3
votes
0answers
148 views
Pixel shifts from its actual position in Matlab geospatial plots?
I am plotting a spatial map in MATLAB, where I have LAT-LON info for corresponding fill values.
Though the grid lines follows the meridian and parallels drawn in MATLAB plot domain, the fill values ...
1
vote
0answers
177 views
How to add metadata such as geokeydirectory, geoasciiparams, modelpixelscale and modeltiepoint to a compressed tiff image?
I have resized my original tiff file (1.5gb) to a tiff file (170mb). But there was no geo reference points in the resized image which was present in my original tiff file. I have attached the ...
0
votes
1answer
83 views
Running MFmask in MATLAB: Error using imfill
I am trying to create a cloud and cloud shadow masking raster using MFmask (https://www.sciencedirect.com/science/article/pii/S0034425717303073) for a Landsat 8 scene. MFmask 1.1 is modified version ...
0
votes
1answer
748 views
Using Geotiffwrite or Worldfilewrite for global TIF in MATLAB?
In MATLAB I have written the code:
[image,geo]=geotiffread('africa.tif');
info=geotiffinfo('africa.tif');
geotiffwrite('Wafrica.tif',image,geo);
but there was error:
geotiffwrite>validateR (line ...
1
vote
0answers
85 views
Getting the area of a polygon from Google Earth or .xyz digital elevation model INCLUDING area due to topography
I'm doing some analysis for a study on geomorphology. For this I'm comparing the 'bumpiness' of lava fields to the 'bumpiness' of the surroundings. What I'm trying to do for this is measure the ratio ...
0
votes
0answers
566 views
How to convert an image .jpg to GeoTIFF (with georeference)
I did a linear regression of 26 images with the same structure (rows, columns, resolution, DATUM, projection) using MATLAB. The result that I have got is an image without spatial reference, other ...
2
votes
1answer
392 views
Reading LiDAR attributes from a .mat file?
I am working on some LiDAR dataset. I am used to importing the LiDAR data from .las files. I generally use liblas library in Python to import the same.
Recently, I found the dataset in .mat format ...
1
vote
1answer
190 views
Read Matlab file as raster in R
I have a .mat file I got from someone, and it's supposed to represent global gridded data. I wanted to read it as a raster in R.
Importing was ok, I was able to import using the R.matlab package
>...
2
votes
0answers
173 views
Shortest path creation between two lines
I've a raster of temperature of a river, I'd like to extract values horizontally, so from bank to bank, shortest path. so basically extract pixel values along the red lines in the schema I did. What ...
0
votes
1answer
45 views
interferometry vertical wavenumber
I want to process a stack of Sentinel 1 SLC images (4) to produce tomographic layers for above ground biomass estimation. To do that, I need to generate the interferometric vertical wave number images ...
0
votes
1answer
221 views
Write referenced GeoTiff with 4 corners on matlab
I have some matlab raster matrix to export to geotif.
I also have the location of each corner in Decimal degrees (WGS84).
I know how to export and write the data into a geotiff but i'm having a ...
0
votes
0answers
465 views
Correctly display the colors in MATLAB colormap and colorbar?
I am plotting spatial maps with fill values ranging from 0.05 to -0.05
Below is the part of code for plotting colormap and colorbar
colormap(brewermap([10],'RdYlBu'));
caxis([-0.05 0....
2
votes
0answers
170 views
ENVI shows colors of different RGB code the same in a bitmap image wrongly?
As you see in this picture which I've captured in MATLAB, there are two colors.
Red with the RGB code (255,0,0)
Brown with the RGB code (138,139,1)
I've tried to show the same picture in ENVI, ...
1
vote
0answers
395 views
Allign shapefile polygons and underlying image in MATLAB spatial plots?
I am plotting a map in MATLAB. For this I have values at corresponding Latitude-Longitude.
I am creating meshgrids for Lat, Lon, and values for plotting the map.
Somehow plotted map does not exactly ...
0
votes
2answers
149 views
How to adjust rows and columns, retaining cell sizes in arcmap?
The Situation: I have a vector data map with all the countries in the World, including a unique landcode for every country. I need to convert it into a raster map, so I can eventually analyse (with ...
2
votes
1answer
1k views
Sentinel-2 Reflectance calculation
which is the proceddure for reflectance calculation from Sentinel 2 1C products downloaded from ESA Scientific Hub?
0
votes
1answer
112 views
Lena Histogram 8 bit unsigned image
I am working on Lena image (unsigned 8 bit grayscale 512*512 pixels). I tried to plot the histogram using matlab (inbuilt imhist function) and in arcgis. I am getting different pixel count, appx duble ...
1
vote
1answer
445 views
from .hdf to .geoTIFF of product MOD35
I am trying to create a geoTIFF from an .hdf MOD35_L2, I am trying either a Matlab code, either I heard something about LDOPE-1.7 + MRTSwath but I am not really succeeding.
Have anyone ever tried to ...
1
vote
1answer
361 views
Easiest way to create an area raster
The objective is to create a global geotiff raster at 30s resolution (appr 1km) with the pixel value the area of that pixel. I have multiple tools but struggle to find the easiest way. I am aware of ...
-1
votes
1answer
192 views
Voronoi Polygon Coordinates
I am using Voronoi polygon coordinates and respective node coordinates together. To apply the load to that particular node which is obtained by summing up the loads that lies within the polygon. By ...
1
vote
0answers
148 views
Solar Potential roof-top analysis using GIS and Remote Sensing [closed]
3D Building models were generated by using Google Sketchup Pro and Google Earth.
Then shadow casted 2D orthographic raster models were exported as TIFF or JPEG format.
For further analysis with ...
2
votes
1answer
260 views
Using spectral library provided by USGS Spectroscopy Lab?
In the USGS Spectroscopy laboratory, the researchers there have worked very hard to measure reflectance of a hundreds of minerals (and plants).
Look at this site
I downloaded the splib04a - FTP ...
-2
votes
1answer
396 views
Exporting data from ArcGIS for use in Fuzzy Logic in Matlab?
How can I export layers from ArcGIS for use in Matlab software for working with Fuzzy Logic, and what extension?
1
vote
0answers
51 views
SPOT 6 parameters to open data in matlab
I'm trying to open SPOT 6 data on Matlab using multibandread, but since I don't have some of the paremeters I'm only getting a black image.
I've been looking on the web for these parameters but I ...
0
votes
1answer
312 views
Define polygons with structured data points
I am doing image processing and I get some scatter points (blue) now, filled with random points (red) on it.
I want to find the random points lay inside scatter blue circles. So I tired with MATLAB ...
1
vote
1answer
584 views
How to remove cloudy pixel from MODIS NDVI (MOD13Q1)
I am using MODIS NDVI product (MOD13Q1) for the vegetation changes study. I want to remove cloudy or bad pixel from MODIS NDVI data. I am not getting any suitable method or software or any program to ...
0
votes
1answer
608 views
PSO for solving shortest path in matlab
I crate a file that represents 16000 edges with information of start node, end node and cost in a table.
In MATLAB i want to solve shortest path with PSO algorithm. How i can solve it?
0
votes
1answer
218 views
ArcMap highlight features from code
I have a shapefile of lines containing an amount n of elements. I exported these features and analyzed them with another program (Matlab), which provided me as an output a row vector of length n ...
3
votes
0answers
361 views
Hot Spot Map in ArcMap and MATLAB [closed]
I've tried out the Hot Spot Map tutorial for ArcMap, which is working just fine, and I'm now starting to make some modifications so that it fits my data sets.
Instead of aggregating the points as in ...
3
votes
1answer
2k views
Set NaN values to Transparent in Matlab 'geoshow' function?
I am trying to plot rainfall values in MATLAB using geoshow function.
NaN values should be transparent in the map. However, the plot I am getting comes with dark blue color for NaN values. I have ...
1
vote
0answers
1k views
Creating spatial plot with colored polygons in MATLAB from shapefile?
I have a shapefile of that has 1800+ polygon features. Each polygon has unique value.
How to create a spatial map for visual interpretation.
Here is what I have tried in MATLAB.
clear all;
clc;
...
1
vote
0answers
225 views
Georeferenced Image Overlay and export to new image
I have two Geotiffs (one satellite image, one clipped image). I want to put the clipped image over the satellite image, because it shows flow velocity from this shown glacier (see image below). I ...
2
votes
0answers
89 views
Converting u and v from WGS84 to NZTM2000 - Do I need to do vector conversion?
I have u and v wind component values in latitude and longitude in WGS84. I want to convert this to NZTM2000. I've converted the lat/lon in ArcView - (and will try in R) - but do I need to also do some ...
3
votes
3answers
2k views
Flow Accumulation Python or MATLAB Script
does anyone have any resources for scripting the D8 flow accumulation in Python or MATLAB after obtaining the flow direction values and filling in 'sinks' and 'flats'?
I am trying to understand the ...
3
votes
1answer
429 views
Spatio-temporal statistical analysis
I need to perform an anomaly analysis in both space and time. I have 4 data parameters: latitude, longitude, time and temperature. What I’m trying to do is to find temperature anomalies that are ...
