Questions tagged [model]

representation of an object

Filter by
Sorted by
Tagged with
0
votes
1answer
41 views

Speeding up QGIS Processing

My QGIS processing is pretty slow. Even using "fill sinks (wang & liu)" or "r.fill.dir" takes many hours to finish even though I use a "Intel(R) Xeon(R) Gold 6258R CPU @ 2....
0
votes
1answer
17 views

Tracing back single class sample sizes of a random forest classification model (.pkl-file) [QGIS 3.16 - EnMAP Box - RFC]

A couple of weeks ago, I created some prediction models with the EnMAP Box Classification Workflow. In some of the models I reduced the sample size for some classes as shown in the image below. Here, ...
3
votes
1answer
63 views

Adding field containing expression from the Calculator field after executed model/script

I tried to use the refactor field processing after my model creates the two layers needed to calculate the expression: line_locate_point(geometry:=geometry(get_feature('LH_fusion', 'id', '1')), point:=...
2
votes
0answers
42 views

Model designer: raster processing with high compression

I am new to QGIS, please excuse my probably very easy question to which I couldnt find an easy solution: I have many folders with each 9 raster files with different resolution (0.5 m - 2 m). In every ...
0
votes
0answers
19 views

Geostatistical Modelling / What is the right model for my data?

I try to find a model for my data. I explored OLS regression models but I just get an R² of around 0.18 and I think I should not go with that. I also noticed that my data could be better modeled with ...
0
votes
0answers
6 views

Convertind a sketch up model to GOCAD 3ds .ml file type

I use a program called GOCAD. It exports the models created in .ml file format. I was wondering if there is a way to take a simple terrain block created in Sketchup and convert it to .ml? Any help or ...
1
vote
0answers
54 views

Estimate cross-covariance of seasonality (NDVI) and precipitation data with a harmonic regression model then visualize a chart from the model

The challenge is to estimate cross-covariance of seasonality (NDVI) and 30-day precipitation with a harmonic model. I added the UCSB CHIRPS rainfall data as bands to all available Landsat 8 imagery ...
1
vote
0answers
40 views

Create an outline based on density of raster

I have a classified aerial image of small vegetation that is separated enough by ground that it is not overlapping each other. After the classification process (dzetsaka), I removed all the other ...
0
votes
1answer
251 views

Iterate a model with Python

I have a model that works well but I can't iterate with a batch process. Therefore, I would like to use a python script to iterate to avoid repetitive tasks. I want iterate my model (that I have ...
0
votes
1answer
29 views

Convert "Get Raster Properties" output to long

I am building a model in ArcGIS (10.7.1) and I would like to use the maximum value of a raster as the "number of output zones" input to the Slice function. I used the Get Raster Properties tool to ...
1
vote
1answer
22 views

How to export ArcMap model parameters to an Excel file?

I have a model where the user inserts different model parameters like "Name", "Elevation", "Threshold A", "Threshold B" and so on. Based on this, features get selected, saved to .xls files where they ...
3
votes
0answers
206 views

Cannot use raster layers not defined as inputs in a model in QGIS 3.x

I have a problem in building raster models: both with QGIS 3.4.5 and QGIS 3.10.3, the raster calculator algorithm, used in a model, refuses to work if the requested layers are other than the defined ...
1
vote
1answer
124 views

Euclidean Distance in Model Builder error

I'm trying to use Model Builder to create Euclidean Distance raster files for a set of line features. Each line also have a buffer polygon that corresponds to each line that I want to have as an ...
1
vote
1answer
90 views

Output of an algorithm in QGIS Graphic Modeler

I use two Processing tools in a graphic Model in QGIS: 1-Select by Location 2-Select by Attribute The problem is that I can't get the output of the selection by location so that I can't use it as ...
1
vote
1answer
455 views

spplot doesn´t work - sppanel error

I have this code (below) for plotting some information in a map, but it doesn't work, in the map appear only the error "sppanel", why I solve that? library(GWmodel) library(RColorBrewer) data(...
1
vote
0answers
67 views

Clipping DEM model in QGIS?

I have created a model that takes a point layer that contains elevation data, then interpolate it using TIN and then clip the results according to shapefile. The problem is that the model works and ...
0
votes
1answer
173 views

What are the formulas used in SAGA Ordinary Kriging?

can some one name the formulas avaible in the Ordinary Kriging Modul of SAGA: What ist the exponential, spherical, Gaussian-Model, etc.?
0
votes
0answers
36 views

ArcMap tool for for mapping and measuring methane, considering variable parameters

I have data on 70 methane-emitting plants. For each plant I have the average data of temperature and precipitation between the years 2000-2014. In addition, each plant also has relative humidity, wind ...
2
votes
3answers
195 views

Understanding GTFS static data relationships?

I'm trying to build a data store for the GFTS static data, but can't get my head around the relationships between Route, Stop, Stop_Times and Trips. e.g Route 2E runs between airport and city centre. ...
0
votes
0answers
478 views

Loading collada into 3D view of QGIS using Qgis2ThreeJs Plugin?

I have been looking at documentation and other posts but cannot find a way to load a 3D model into QGIS. I Installed the qgis2ThreeJs Plugin. I have tried to load a collada file in a temporary ...
2
votes
0answers
38 views

Is there an existing solution for pattern recognition?

I've been looking at modeling potential avalanche hazard based on terrain characteristics. I have a vector layer showing historical avalanche paths and have raster layers for elevation, aspect, slope,...
0
votes
0answers
36 views

ArcGIS Modelbuilder model clogs up memory?

I have a model in which a zonal histogram is computed of each line in a feature class, showing the amount of cells each line intersects in a raster file. After this, this column is joined to a table ...
1
vote
1answer
237 views

Run CAR model (CARBayes package) with zip (a zero-inflated Poisson) family in R

I am trying to run the function "S.CARBym" using a zero-inflated Poisson (zip) family because my data y (cases of a disease) has too many zeros. I couldn't run it because the function asks to specify ...
4
votes
1answer
84 views

Seeking algorithms for DEM generation? [closed]

What are the different algorithms employed for the generation of a Digital elevation model from images captured using an unmanned aerial vehicle ?
0
votes
1answer
208 views

How to Create SCS (now NRCS) Curve Number Grid using GIS with European map (ESDAC dataset)?

After finishing the watershed delineation, and after creating the HMS schematic in Arcmap, i was trying to include the land use map and soil map in the process, by using the CNgrid preparation by ...
2
votes
0answers
129 views

Model builder generating empty output

In the model below, I get an empty output if I run it from start to finish. It works though if I first individually run the project and create fishnet tools, then run the entire model. Something is ...
1
vote
1answer
86 views

Disaggregating NetCDF in ArcMap?

I have many netcdf files in one folder. I want to extract variables from each netcdf file and save them as another .nc file. The process is like this: Make NetCDF Raster layer (one .nc) Define name, ...
1
vote
1answer
64 views

Problem with number entry QGIS modeler

i created some number entry in QGIS modeler I created them specifically for them to be decimal numbers and not integer. But when i try my model, when i put a decimal number like 0.255 the value ...
8
votes
1answer
801 views

Accessing "Save Vector Layer As" algorithm in QGIS Processing Model?

I'm building a Processing Model in QGIS that ultimately exports a points shapefile (vector layer) as a CSV in a different coordinate system than the shapefile. I ordinarily accomplish this in the "...
1
vote
1answer
756 views

Creating a 3D model of a pond using GPS coordinates and associated depth measurements

There is a pond which I am trying to create a 3D model of to view the depth. We have measured the depth every few meters along straight line transects all across the pond, and have GPS coordinates for ...
2
votes
0answers
187 views

Running Leroux model in WinBUGs

This may be a long shot, but I have been given some WinBUGs code to run a model with a Leroux prior. I'm interested in 'fixing' the precisions for Leroux prior and the intercept term in this model. ...
5
votes
1answer
139 views

Ignoring multi-collinearity in spatial stepwise regression modeling?

We have used multi-linear regression (stepwise) approach to perform spatial modeling with parameters derived from Remote Sensing data. The outcome of the statistically significant components produce ...
0
votes
2answers
3k views

How to create 2D or 3D cross sections from geological borehole data in QGIS

Is it possible to load borehole csv data that contains x, y, z coordinates into QGIS and create cross sections of the strata? It is data along a rail line so a DEM is not suitable. Just a 2D cross ...
3
votes
1answer
3k views

Using AddJoin in ArcPy?

I'm trying to join 8000+ daily rain tables to one climatic stations shape. The goal is to get 8000+ daily rain point features. I used to work with the next arcgis model, but now i'm trying to put it ...
4
votes
1answer
64 views

Modifying number of features in Merge tool each simulation run of ModelBuilder?

I am relatively new to ModelBuilder and null in python. I want to include Merge tool in my model. However: at run 1, I want to Merge shapefiles s1 and s2 at run 2, I want to Merge shapefiles s1, s2 ...
5
votes
1answer
2k views

Importing COLLADA Models into QGIS

QGIS 2.18.5 I'm using Qgis2threejs to put this COLLADA model ontop of a point (open in IE, not chrome). You see how the web-preview animates perfectly and the blades are centred on the hub. When ...
0
votes
0answers
98 views

ISA Model and GFS data

I have a newbie question... I always used the International Standard Atmosphere model whenever I needed to calculate the temperature in a given altitude. It always looked accurate to me... However,...
4
votes
1answer
3k views

DTM extraction of tree heights

I need to classify tree heights in a DSM of a slope-y terrain. It´s not a forest but several individual / detached trees. In a plane terrain it won´t be an issue but in that uneven terrain I need ...
2
votes
0answers
215 views

Using QGIS and Python to develop sound attenuation model? [closed]

I am in the process of developing a model that allows me to see sound attenuation over distance from a point source. I am using this sound attenuation equation: Lp = Lw - 20logr - 11 - Aabs - Ae ...
1
vote
0answers
123 views

Exporting Multiple Variable Inputs to CAD in ModelBuilder?

I am trying to create a tool that clips (X) layers from an area, and creates a CAD file with the layers. I'm using inline substitutions to fill in the names for the layers, (X), which are then ...
3
votes
1answer
414 views

Summary Statistics after Spatial Joining in Modelbuilder

I am currently building a model to help speed up part of the generation of a map I make occasionally for the Dept of Public Works I work with. I have the majority of the map already made and saved in ...
1
vote
0answers
16 views

Automatic add/load raster layer within selected polygon [closed]

Is it possible to automatic load/add georeferenced raster by selecting a polygon in a grid or by making a selection in a map. Perhaps it is possible to make at tool with modelbuilding?
0
votes
1answer
387 views

How to have a Raster output of a ppm model in spastat

I am trying to compare the outputs of species distribution models. My current code uses the following function to calculate TSS scores. TSS_Score<-function(TrueBinary, Raster) { Raster[]<-as....
2
votes
2answers
196 views

Split lines by zones

I have a Roads line feature class and a Zones polygon feature class. I want to make a model that splits the Roads lines using the Zones polygons. The output is to be lines, just like the original, and ...
1
vote
1answer
680 views

Output name with Current Date

My goal is to create a daily automated task using a model built from ArcGIS ModelBuilder, then exported to Python script. I would like the outputs of this model to have the name (Stat_) + today's date:...
2
votes
0answers
23 views

Tools for accumulating pixel values [duplicate]

Some months ago I was asking for ideas in order to do a displacement model of a lost person with GIS. This model would represent the displacement of a person by a terrain with some costs paramethers ...
0
votes
1answer
584 views

Running models in python script from a list

For a while now we're running a script each night via task scheduler from which several custom models are being run. In an effort to streamline the code and simplify adding more models in the future I'...
1
vote
1answer
921 views

Path to toolbox in arcpy

I have got a toolbox full of models to run from one script. Is there any code that calculates the location of script from which I can get the path to my toolbox? Script and models are imported if ...
1
vote
0answers
146 views

Using ArcGIS Area Solar Radiation tool?

I tried using the tool multiple times and my result values should be around 2000-3000 W/m2/d. However my results reach up to 6000 W/m2/d. I am using a raster with cell size 30 meters and WGS 1984 ...
0
votes
2answers
254 views

How to monitor changes in a PostGIS database in GeoDjango?

I have been working on a GeoDjango project which uses a PostGIS database.I have enabled the history in my application using the django-simple-history module and works all fine. The issues comes in ...