All Questions
41 questions
0
votes
1
answer
31
views
Migrate projects and information from QGIS 2.x to QGIS 3.x [closed]
How can I migrate projects and information from QGIS 2.x to QGIS 3.x?
I can't find much documentation about it, it is from the QGIS version 2.18 to the current 3.34
What things must be taken into ...
1
vote
1
answer
262
views
Selecting snapped vertices of different two features individually by QGIS 3.X vertex tool
In QGIS 2, I can use node tool,
click on feature 2
click on the vertex (of feature 2) to select it.
Delete it.
I QGIS 3, by using vertex tool, I can't select which feature I want to modify, it ...
- 77
1
vote
0
answers
238
views
GeomorphicFloodArea Plugin is not working
I'm trying to get the plugin GeomorphicFloodArea to work but cannot.
I tried using QGIS 3.10 but got an error message, so I downloaded version 2.18.28 and it still will not work. I get an error ...
- 11
1
vote
1
answer
453
views
Is there any QGIS 3.x alternative tool for osmpoly_export plugin?
I used this plugin in QGIS2 for easy defining the area of interest using some vector polygon and then cropping the OSM data with osmctools and the poly file.
However the plugin is QGIS2 only:
This is ...
- 1,738
4
votes
1
answer
149
views
Differences in the Select by expression between QGIS 2.18 and 3.4
I want to select in a population table the growth rate between two years greather than 1.5.
In QGIS 2.18 the following expression works fine
"POP_P2014" / "POP_P2000" > 1.5
With the same data ...
- 175
1
vote
1
answer
2k
views
QGIS SAGA "Kriging" tools doesn't work
I try out different methods of point interpolation for a digital terrain model. For this purpose I tried to run the "ordinary kriging tool" from the SAGA Tools with QGIS 2.18 and QGIS 3.2.
When I run ...
- 399
3
votes
1
answer
542
views
qgis2to3 to migrate plugin from version 2 to version 3
I have a plugin in QGIS 2 and I'm trying to migrate it to version 3
I downloaded the 'qgis2to3' tool
--> I installed the pip (get-pip.py) :
python get-pip.py
--> I installed qgis2to3 :
python ...
- 307
5
votes
1
answer
498
views
Where did checkbox option in Points to Path tool go?
I made considerable use of the "Points to Paths" tool. I forgot which QGIS version I was using, but it was most likely 2.x, probably 2.14.
According to my memory and notes the tool had a ...
- 8,356
1
vote
0
answers
39
views
Batch Saving Raster DTm and choosing type in QGIS 2.18
Follow on question from the following Previous question
batch saving 10m DTM layers using python console
I would now like to set the output of my Raster .tif files to Float32 as by default the .asc ...
- 1,110
3
votes
0
answers
139
views
Calculating direction of polygon using other features? (QGIS)
In QGIS 2 or 3 I have some DEM rasters, on top of that vector layers with plots and buildings + pin (blue one) with coordinates of building.
How to calculate position of garden? Is it n, ne, e, se, s,...
- 367
2
votes
1
answer
1k
views
Calculating volume of buildings using QGIS?
I am working with QGIS 2 or 3
I have DSM and DTM already so I can calculate DSM - DTM:
Plus, I have shapefile with buildings' footprints.
How to calculate volume of every single building using DSM-...
- 367
2
votes
0
answers
150
views
Migrate QGIS2 projects to QGIS3
I have about 40 QGIS2 projects. If I open them with QGIS3 labels and svg icons are not displayed. I don't know if there is any other feature that is not working when upgrading to QGIS3, but I suppose ...
- 3,768
1
vote
1
answer
238
views
Replacement for moveLayer in QGIS 3?
I am a novice to QGIS tasked with updating other developers' plugins from QGIS 2 to QGIS 3.
Here's the code I need to replace:
legend = self.iface.legendInterface()
index = legend.addGroup('...
- 479
2
votes
1
answer
421
views
Creating an Action in QGIS with multiple Expression?
I want to create an action in QGIS with multiple Expression. But unable to do so. I want to open images from two different directories with one action. Is it possible? How can I do so?
e.g.
Type : ...
- 21
2
votes
2
answers
1k
views
QGIS2 to QGIS3 plugin migration issue AttributeError: type object 'QObject' has no attribute 'connect' [duplicate]
I am trying to migrate a plugin. I have these two lines:
QtCore.QObject.connect(self.buttonBox, QtCore.SIGNAL(_fromUtf8("accepted()")), Configuration.accept)
QtCore.QObject.connect(self.buttonBox, ...
- 1,443
1
vote
1
answer
2k
views
Trying to find the Qt5 version of QVBoxLayout
Migrating a plugin and started getting the error AttributeError: module 'qgis.PyQt.QtGui' has no attribute 'QVBoxLayout' I cannot find this one in the API changes I tied using qgis.PyQt5.QtGui but ...
- 1,443
4
votes
1
answer
1k
views
TypeError: qRegisterResourceData(int, bytes, bytes, bytes): argument 2 has unexpected type 'str'
Similar question here, I tried the suggested answer but it didn't work for my situation.
updating plugin from qgis 2 to 3. qRegisterResourceData . argument 2 has unexpected type 'str'
I am ...
- 1,443
8
votes
3
answers
1k
views
What happened to QGIS 2.x LTR?
I've been using QGIS 2.x LTR version for quite some time now (mostly for Lizmap webclient because 3.x didn't perform as well), but today as I wanted to install QGIS on another PC, I realized I couldn'...
- 799
0
votes
0
answers
95
views
Converting QGIS 3.6 Templates for use in QGIS 2.18?
How do I convert QGIS 3.6 Templates for use in QGIS 2.18?
I have found plenty of stuff on converting the opposite way around.
- 101
2
votes
0
answers
259
views
Updating set of attributes on vector layer from .csv table?
I have over 1,000 records in a .shp file, all with a unique ID field (LINKID), along with many other fields containing data (TXTFLD1, TXTFLD2, INTFLD1, INTFLD2, etc).
These records have been copied ...
1
vote
0
answers
93
views
Difference between DEM raster in QGIS 2.18 and 3.4.4 [duplicate]
I came across a really strange problem.
Untill today i always worked in QGIS 2.18. Now i wanted to upgraded to 3.4.4 ( it was already downloaded but hadn't used it yet)
When opening my QGIS ...
- 166
4
votes
1
answer
848
views
How to create a valid QgsVectorLayer from a PostgreSQL view?
I am attempting to create a QgsVectorLayer with the same code as I am using for a PostgreSQL table, which works correctly and the isValid() method on the layer returns true.
uri=QgsDataSourceUri()
...
- 14.7k
1
vote
0
answers
607
views
GRASS r.slope.aspect via QGIS 2.18 vs QGIS 3.4 - not working
I seem to be unable to replicate actions with GRASS tools when I access them through QGIS 3.4. In particular the r.slope tool. I receive error messages and it fails in QGIS 3.4.
They seem to work fine ...
- 404
1
vote
1
answer
2k
views
UBUNTU 16.04, QGIS 3.4 above Installation problem
I want to install QGIS 3.4 above and did exactly the same as this page:
QGIS Installers
and tried the codes below having no error at all:
(1) add the following lines to /etc/apt/sources.list
deb ...
1
vote
1
answer
284
views
QGIS - how to move layer files while project is open
I want to move layer files (within browser directory structure) while my QGIS project is still open - therefore allowing the project to update its relative link to that file. ARCGIS does this, but not ...
- 404
7
votes
1
answer
4k
views
Add PostGIS layer to QGIS via Python Console
How can I add a PostGIS layer to QGIS via the Python Console?
With some server setups, especially with a large number of tables, it can be very slow to load the list of layers via the Browser or Data ...
- 872
2
votes
1
answer
287
views
Reason for better save capability of QGIS 3
I have an internal processes meeting with work where I am trying to describe the benefits to migrating to QGIS 3 from QGIS 2.
I need to explain the technicalities of how the save option works better ...
- 3,282
1
vote
1
answer
236
views
QGIS2 Plugin Replacement for Join Attributes by Location
I am using QGIS (ver2.18.22) to join 2 layers (polygons) at intersections to derive some summary statistics into the join layer ("Grid" layer). The "Grid" layer is assembled by using Create Grid, and ...
- 47
0
votes
1
answer
229
views
Will I lose project functionality on upgrading QGIS?
This might be a stupid question but if I update to QGIS 3.2.1 will I have problems working on projects created in my current 2.18.20?
- 131
4
votes
0
answers
2k
views
Install QGIS 3 and QGIS 2.0 Ubuntu 18.04 [duplicate]
I have successfully installed QGIS-3 on my ubuntu 18.04. I want to install QGIS-2 as well along with QGSI-3. How can i install QGIS-2.18 as well. So that QGIS 2 and QGIS 3 both would be running on my ...
- 2,281
0
votes
1
answer
231
views
QGIS hyperlink to server location- working in 3.0 but not 2.18.20?
This is not necessarily a pressing issue, as there is a workaround, but it has piqued my curiosity about how QGIS manages hyperlinks through its 'Action' functionality. Please feel free to correct my ...
- 342
0
votes
1
answer
131
views
QGIS 2.18 to 3.0 change in raster values
I had a raster sent to me which had different values on the other person's QGIS, he's working with 2.18 and I'm working with 3.0.
he had to set a threshold based on his index of values but couldn't ...
- 3,595
1
vote
1
answer
1k
views
QGiS - Values missing from graduated style
I'm trying to do the very simple/standard task of presenting points (and then polygons created from them) as a graduated colour style, however many points are missing, evinced from the lowest number ...
- 1,089
5
votes
1
answer
2k
views
Custom format for a grid with degrees, minutes, seconds with suffix using letter from another language
I am designing a map in French where West is "Ouest", and thus the map should read 45°23′67′′O instead of 45°23′67′′W. I am using a version of QGIS in English (update: in the French version of QGIS, ...
- 2,027
3
votes
0
answers
265
views
How to transfer QGIS configurations to latest version?
I have QGIS 2.18.11 on my machine. There are saved wms, wfs and DB connections. After installing QGIS 3.0 I can see saved wms connections but no DB connection is listed in 3.0. Collegue's problem is ...
- 1,011
6
votes
1
answer
626
views
How to use optional inputs in model processor for QGIS 2.18/3.0?
I have developed a processing model in QGIS 2.18 where all my inputs are optional and I need them to be truly optional. However, the model will not run unless I have all inputs present.
I have tried ...
- 495
2
votes
1
answer
785
views
QGIS 3.00 crashes while QGIS 2.99 worked well
Using the standalone-installers 64bit on a windows 10 64bit pro machine:
various 2.99 version including the latest 2.99 build #8 worked well with the project global_connections from the book QGIS Map ...
- 7,235
4
votes
1
answer
155
views
Why $area gave me a wrong value QGIS 2.99?
I want to calculate the area with $area function in QGIS 2.99 but the operation gave me a wrong value.
Here is a picture comparing the results between QGIS 2.99 and QGIS 2.18. The right side is QGIS ...
- 405
3
votes
2
answers
3k
views
Joining attributes by location for more than one located feature using QGIS
In the standard join attributes by locationfeature in QGIS 2.0/2.18, there are two options:
Take attributes first located feature
Take summary of intersecting features
Is there a function in QGIS ...
- 2,027
3
votes
0
answers
65
views
Importing a building into QGIS? [duplicate]
Given an SVG drawing of a building, and 2 GPS-reference points, as well as where north is in the drawing, how can I import a building into QGIS so the 2 GPS-reference-points are at the same ...
- 31
18
votes
2
answers
10k
views
Save and load user profiles in QGIS
Is there a way use a configuration file, maybe .ini to load in the relevant settings for QGIS when it is setup, maybe to share with various people?
Plugins installed and plugin repositories filled in
...
- 611