Questions tagged [spatial-analyst]
Spatial Analyst is an extension within ArcGIS that provides a range of spatial modeling and analysis tools.
346
questions with no upvoted or accepted answers
11
votes
0
answers
1k
views
What is the convergence threshold for ArcGIS Iso Cluster?
The ArcGIS tool Iso Cluster Unsupervised Classification does not seem to have any documentation on the convergence threshold used in the tool. To compare, Erdas Imagine has all of the necessary ...
- 51.3k
3
votes
0
answers
104
views
ArcPy raster Reclassify not covering all cells in raster
I am trying to use Reclassify on 240 rasters using ArcPy within the Python window in ArcMap 10.7. My original raster has continuous decimal probabilities ranging from 0 to 1, and my goal is to change ...
- 523
3
votes
0
answers
459
views
Using RemapRange for Reclassify in ArcPy gives ERRORS 000622 and 000628?
I am trying to reclassify a raster, "Conifer_Focl", which lives in inputData.gdb. The max value for "Conifer_Focl" is 33.217064. I'm looking to reclassify as:
I am following the instructions from ...
- 750
3
votes
0
answers
55
views
Need to run a Groundwater Analysis Based on Points to a Raster
The title sounds daunting, but this task really isn't. I have well samples over a decade in certain locations through an area. These samples contain a value of that element at that point in time. I ...
- 4,377
3
votes
0
answers
138
views
Elevation interpolation along a (sewer) line
Here's what I want to do. I have a vector sewer line feature class that contaings a field for the high invert elevation and one for the low invert elevation. I can turn them into a raster no problem ...
- 31
3
votes
0
answers
472
views
How to extract NetCDF raster values to time enabled shapefiles?
Does anyone know a good way to extract NetCDF raster values to each data point from a time enabled shapefile at the correct time?
I have tried using a python script tool and a loop that steps ...
- 33
3
votes
0
answers
328
views
Calculating surface elevation from DEM of pit and known volume with which it is being filled using ArcMap
I am using ArcMap 10.1.
I have a DEM of a pit.
I have a known volume of material that I want to put in the pit.
I want to know what the elevation of the flat surface of this material will be once it ...
- 449
3
votes
0
answers
3k
views
Interpreting NDVI value on water?
There is a surreal thing on my NDVI images. NDVI values on lake is ranging from -0.04 to 0.7. (The lake surrounded by forest and has freshwater). Theoretically, negative value of NDVI is correspond to ...
- 659
3
votes
0
answers
488
views
Different results from Spatial Analyst GP Tool and Python
I am writing a script that has to subtract one raster from another.
The rasters I have represent
1) Parking Lots (1 = Parking Lot, 0 = not Parking Lot) and
2) a buffer around the Parking Lot (1 = ...
- 4,199
3
votes
0
answers
157
views
Which geostatistical tools to use to determine surface changes over 40 years?
I have a data from the Weather station with SWEmax (snow water equivalent) collected over 40 years. I need to interpolate the data over my river's watershed and then, somehow, determine the ...
- 31
3
votes
0
answers
1k
views
Performing Multicriteria Analysis Using Distance Along Road Network?
There is the possibility that I will be working on a project which will look at thousands of properties in a region and measure their accessibility to different services (schools, parks, hospitals, ...
- 21.7k
2
votes
0
answers
56
views
Iterate over a list of raster with Arcpy and apply Con() to each raster
I would like to iterate a list of raster objects and apply Con() to each raster. The rasters are in a specific order in the list. That's important. All I want to do is to write the value of the ...
- 527
2
votes
0
answers
37
views
ArcPy producing wrong slope map using Spatial Analyst with ArcMap
I wrote a Python script which is supposed to produce a slope map with 6 classes each one being from 0-3.99, 4-9.99, 10-15.99, 16-30.99, 31-60.99, 61+ (Although for testing purposes the max is 789.54). ...
- 45
2
votes
1
answer
129
views
Zonal Statistics as table on population raster does not produce correct regional population figures using ArcGIS Pro
I have a population raster (from Worldpop.org) with data on the population count of Philippines. It is unconstrained data from 2020, 100m resolution.
Link to raster: https://www.worldpop.org/geodata/...
2
votes
1
answer
93
views
Getting the percentage of points within an area
I'm new to ArcGIS and trying to gather the number of points and a percentage of those points within a somewhat small area. How would I do this or what would this be called? Spatial query? I have ...
- 21
2
votes
0
answers
48
views
Using LiDAR-Derived DEM to Identify Aerial Sewer Lines
I am trying to come up with the best process for identifying aerial sewer lines (typically over streams) using the pipe inverts and a LiDAR-derived DEM. In other words, locate the lines where the Z ...
- 41
2
votes
1
answer
647
views
Calculating spatial correlation between two datasets using ArcMap and Spatial Analyst
I am using ArcMap and the Spatial Analyst extension.
I am trying to find a correlation between my raster datasets. For example, for Net Primary Production (NPP) model I used too many input datasets ...
2
votes
0
answers
30
views
Find Optimal Subset of Feature Layer Based on Spatial Criteria & Attributes
I'm using a Census tract shapefile with their corresponding attributes of interest within ArcMap 10.7.1.
My project goal is to identify the subset of tracts that share a line segment while:
...
2
votes
0
answers
133
views
Choosing observer points for Viewshed tool in ArcMap to identify visibility of landform
I am using ArcMap 10.8.
I want to create a polygon that shows all the areas within a region from which an observer could see a specific mountain.
I created a polygon around the mountain, and I'm going ...
- 101
2
votes
0
answers
314
views
Understanding units in Kernel Density analysis using ArcMap
I'm having trouble understanding the units from a Kernel Density analysis in ArcMap.
The Context: I am analyzing how many structures will be damaged by sea-level rise in a coastal community. I have ...
- 21
2
votes
0
answers
83
views
Contour lines from AutoCAD to QGIS: how to automatically assign the right value to the Z
I have a plate of contour lines made on AutoCAD (contour lines do not have a Z). The Z is indicated only for some curves but in a text format.
If you import the table in QGIS the situation is this (...
- 638
2
votes
0
answers
516
views
Error 999999, Table name is invalid - Zonal Stats as table
I am attempting to run a model that iterates rasters and computes zonal statistics returning a table. The raster's statistics are computer across all polygons in a specific shapefile. This model ...
- 378
2
votes
0
answers
105
views
Writing Raster Calculator Expression?
I use ArcMap 10.3.
How do I create an expression in RasterCalculator that allows me to sum up 4 rasters (every pixel has an associated value) and the result to be 0 if any of the 4 values is 0?
For ...
- 21
2
votes
0
answers
82
views
Least cost path from visibility
I use ArcGIS 10.1 and I am dealing with viewshed and least cost path analysis. I would like to generate a path on the basis of a cost surface taking into account the viewshed data as indicated in the ...
- 71
2
votes
0
answers
710
views
Choosing bandwidth and scaling factor for Kernel Density Estimate in ArcGIS Desktop?
I have some points that represent animal locations over the course of a few months at the scale of ~20 sqkm. I am emulating the work of previous researchers in this field, but I'm having trouble ...
- 61
2
votes
0
answers
61
views
Preventing ArcGIS Desktop from creating 64-bit rasters?
I've run into this issue recently wherein I run the Con tool on a 32-bit raster (TIFF format) to change some absurdly high/low values to 0 and I get a 64-bit raster (TIFF format) out the other side. ...
- 443
2
votes
0
answers
499
views
Why is Raster Calculator not honoring compression environment settings?
For some reason, the Raster Calculator isn't honoring any Raster Storage environments that I have set. Mainly, compression and pyramids. I am processing a large raster dataset through raster ...
- 398
2
votes
0
answers
323
views
Calculating indices such as NDVI or NDSI on Landsat 8 imagery whose pixel type is 16 bit signed integer?
I am trying to calculate an NDSI (Normalized Difference Snow Index) using Landsat 8 OLI level 1 imagery atmospherically corrected in ERDAS ATCOR using raster calculator in ArcMap. NDSI is used to to ...
2
votes
0
answers
74
views
Simple iterate SetNull in ArcPy not working
For a large number of rasters, I need to define a pixel value less than zero as being Null and output the rasters. However, my simple SetNull loop (below) only processes the first raster in my list as ...
- 21
2
votes
0
answers
28
views
Adding small-extent rasters to DEM
My goal: create viewsheds for observers which also incorporate the heights of buildings which could block observer view. This is using archaeological data, and is representing time change -- so I need ...
- 81
2
votes
0
answers
68
views
Obtaining a smoothed DTM?
I am use AcGIS 10.1 and have a DTM with an 8 m grid resolution. Which tool could I apply to smooth the surface?
- 71
2
votes
0
answers
39
views
Cost back link tool
I am trying to use cost path analysis to create a least cost path from ports around the UK to various offshore locations. To do this I have created a cost raster grid with values of 0 for land and 1 ...
- 21
2
votes
0
answers
57
views
Combining Rasters
I am working on making a dual density map currently in ArcMap. I've conducted kernel density for my two sets of points, one of which contains incidents, the other residencies. What I want to do is ...
- 31
2
votes
0
answers
48
views
ArcGIS Visibility <NoData> / 0 when observer point in raster cell center
As I discovered, the ArcGIS Visibility tool seems to produces a vertical line from the observer point northwards in the above ground level raster and a 0 value in the visibility Raster, if the ...
2
votes
0
answers
327
views
Raster calculator: Missing areas in output using two mosaics
I'm doing a simple DEM minus DSM to get tree canopy heights. However my results are missing most of the data (no data).
I've used the Minus tool and Raster Calculator achieving the exact same result. ...
- 79
2
votes
0
answers
64
views
How to create a surface area that interpolates and visualizes trends in physical activity in ArcGIS?
I have a dataset that contains several hundred telemetry points for my focal species around twilight hours. Attached to these points are mean values that represent how active the animal was 10 ...
- 117
2
votes
0
answers
182
views
Create Gaussian dispersal kernel raster
In ArcMap 10.4.1 I would like to make a raster with a simple Gaussian distribution away from a central point - as in the image below. It does not need to be 3D, simply higher values at the centre and ...
- 31
2
votes
0
answers
133
views
Region Growing in Modelbuilder with Expand - while loop
I have a series of points (farms) for which I am trying to grow differently sized territories based on the quality of land. I've set up a model where I expand each farm by one cell, then run zonal ...
- 263
2
votes
0
answers
23
views
What kind of input rasters should I use in a Spatial Analyst Corridor process?
I´m trying to map corridors between stands of hardwood. I´ve tried cost path, almost all the time get strange or empty outputs. Now I saw the other tool called Corridor and thought I might give it a ...
- 21
2
votes
0
answers
85
views
Overlaying point data with NDVI layer with raster output (not graph)
I have point data, which are animal burrows, and a NDVI raster layer that shows plant productivity. I want to overlay these layers and determine if vegetation productivity is higher close to burrows (...
- 21
2
votes
1
answer
390
views
Creating multiple, independent Gaussian plume outlines in ArcGIS
In an effort to create buffers that preferentially capture downwind populations of numerous air pollutant sources, I would like to create Gaussian-like plumes in arcgis (or in another program such as ...
- 133
2
votes
0
answers
807
views
Getting huge range of values when using Flow Accumulation tool in ArcGIS Desktop?
I'm trying to use ArcGIS Desktop to delineate watersheds for a series of sampling sites. I've been following the protocol laid out by WhiteboxDev in General steps to create watershed boundary in ...
- 21
2
votes
0
answers
59
views
Why are there null geometry lines after using the contour tool in Spatial Analyst?
A few months ago, I ran the Contour tool on two separate DEMs (one was smoothed and the other wasn't). The contour interval was set to 1m.
Today, I noticed that there were several features created ...
- 21.7k
2
votes
0
answers
86
views
Missing Observations in Zonal Statistics Tool
I am using zonal statistical tools. I have field boundary shapefile which has 1,062,063 observations.
I am using zonal statistical as table tool to obtain precipitation values from raster layer. ...
- 31
2
votes
0
answers
43
views
Replacing attributes of raster cells with other raster values?
I have two raster layers. The first is a terrestrial habitat raster that includes an open water value. The second is a lentic habitat raster. I would like to "burn in" the lentic habitat raster ...
- 1,006
2
votes
0
answers
961
views
Pixel based Regression
I have 80 .tif files, and each pixel value represents NDVI. The whole stack of images is a time-series. I want to run a regression for each pixel using NDVI and time. I have tried to approach this ...
- 816
2
votes
0
answers
73
views
Determine which Polygon Attributes are the Majority Value as Defined by Second Polygon Shapefile
I need to determine the majority soil type within a series of polygons. I have data from the USDA Web Soil Survey (properly formatted and the like). I then have another shapefile with 60+ polygons ...
2
votes
0
answers
49
views
Can I interpolate but follow the trend of another surface?
I have a point data set will a fairly low sample density and a raster that should loosely correlate with the values of the points. For example, this could be elevation and temperature readings.
I want ...
- 1,876
2
votes
0
answers
241
views
Arcpy.sa NoData issue with saving TIFF
Similar to Reclassify raster values of 9999 to NoData, leaving all other values alone, in ArcGIS Desktop?, I am attempting to convert numerical NoData values to actual NoData cells. The solution in ...
- 220
2
votes
0
answers
99
views
Spatial Analyst tools adding extra column of NoData
I've got a script tool in ArcGIS that runs Curvature and Aspect from Spatial Analyst, and the outputs of both contain an extra column. I've attempted to set the extent in the both the tool and the ...
- 220