Questions tagged [spatial-cluster]

Use this tag when referring to spatial clustering in GIS.

Filter by
Sorted by
Tagged with
1
vote
0answers
18 views

Group PostGIS table-rows where geometries are close

In OSM there are often e.g. lines (paths) with the same name but different OSM-IDs. Right next to each other, so basically the same thing, but just different objects with no real relation to each ...
0
votes
0answers
20 views

Clustering adjacent polygons with values over a given threshold with Python

I have a GeoPandas dataframe that looks like the following geometry raster_val 0 POLYGON ((1.85626 49.12003, 1.85626 49.11171, ... 28.530001 1 ...
0
votes
1answer
38 views

Creating homogeneous groups of areas from raster using QGIS

I'm trying to create homogeneous groups of areas from a raster which contain elevations data (in the red area). currently I am doing it manually creating new polygons for each groups. Is there a way ...
0
votes
1answer
97 views

Point Similarity Clustering

I am new to geographical statistics so please pardon this question if it is a duplicate. I would like to test if points that are similar are more or less likely to be near each other. I am latitude ...
0
votes
0answers
17 views

Creating polygons based on attributes in point layer using ArcMap

I have a point layer of residential coordinates which includes an attribute field indicating the most visited hospital for the people living at the coordinate. From these data, I want to create a ...
2
votes
1answer
38 views

PostGIS: Creating Polygon from lots of other geometries and then returning list of ID's in the same query

I am fairly new to all of this but in simplistic terms I have the following problem: I need to create lines from points, and from said points group all of those within n distance of one another. From ...
4
votes
1answer
82 views

How to choose limited number of points to represent a point grid

I need to choose a few points to represent the grid below, e.g: 8 points in the grid below. This point need to be geographic distributed This points needs to be geographic distributed. Lets see a bad ...
6
votes
1answer
1k views

Clustering points in PostGIS

I am trying to cluster points in PostGIS. I have the points and the corresponding Latitudes and Longitudes which I have converted into point geometries. I want to cluster points in such a way that all ...
2
votes
1answer
216 views

Dissolving polygons on distance condition using PostGIS?

I'm tying to group some polygons in same layer, on geometry & attribute conditions: within 0.8m from each other and with same value in a column. With answers I've found here I've got something ...
2
votes
1answer
106 views

PostGIS Recursively Finding Intersections of Polygons to Determine Clusters

My dataset currently contains about 15.000 buildings which partially touch each other. The objective is that those which do touch should belong to a cluster. This "basically" works but the main issue ...
1
vote
0answers
92 views

DBSCAN with huge number of points

We have a dataset of approximately 30 million new points per month (latitude, longitude, and a measurement associated with that point). So far, we have applied DBSCAN to generate a monthly map such ...
0
votes
1answer
25 views

Keeping only highest point in cluster of points using ArcMap

i have a cluster of points in particular areas around NZ. I am only wanting the point with the highest value in this cluster to remain. Also many of the points have the same value, i am just wanting 1 ...
0
votes
0answers
23 views

Why modified feature resets it's position on zoom in/out in Open Layers 6

I have used select and modify interactions with OpenLayers 6, used feature option for modification. These works fine but face an issue with modify interaction. When I change the position of a feature ...
0
votes
0answers
21 views

If there is no spatial autocorrelation, should the spatial cluster detection be performed?

I have a regional count data of disease incidence. First, I calculated empirical Bayes estimate of standardized morbidity rate. Then I performed global Moran's I to check for spatial autocorrelation ...
0
votes
0answers
22 views

Assigning features to spatial clusters created by Oracle SDO_SAM.SPATIAL_CLUSTERS

SDO_SAM.SPATIAL_CLUSTERS creates spatial clusters - how to detect which feature was assigned to which cluster? Is the only way to perform an additional spatial join between cluster geometries and ...
0
votes
1answer
60 views

ArcGIS JS 4.15 Cluster Popup navigation for Cluster

I would like to migrate from ArcGIS JS API 3.x to 4.16. One other feature I am using from 3.x version is clustering. In 3.x is it allow user to click on Cluster marker and navigate between all ...
2
votes
1answer
207 views

Cluster analysis for different plant species with elevation, aspect, slope rasters using ArcGIS Desktop?

I am using ArcGIS Desktop. I have a point shapefile for 5 different plant species and rasters (elevation, slope, aspect, canopy height). I am trying to find clusters for each species in terms of ...
0
votes
0answers
70 views

Distance computation for geospatial clustering of lat/lon points

I am working with a pretty large dataset (~500K data points) in Python (GeoPandas) and I would like to perform geospatial clustering on some subsets (~60K points) of the data. My question has to do ...
3
votes
2answers
356 views

Applying ST_ClusterDBSCAN repeatedly until cluster sizes small enough

I am looking for a way to spatially clusters thousands of datapoints (potentially millions) based on distance, such that each cluster contains less than 5000 points. This is a similar question to ...
0
votes
0answers
14 views

GeoServer PointStacker transformation and <PropertyName> based on data attributes [duplicate]

I created a point cluster style (for health facilities) in QGIS 3.12 that I try to replicate in GeoServer. The SLD saved from QGIS does not work in GeoServer (mine is 2.12 as it is embedded in a SDI, ...
0
votes
0answers
26 views

How to evaluate the statistic significance in the Neighbour Nearest Test?

I'm reviewing a scientific article to be publish. I tried to evidence that pathogens collected from different geographic areas clustered. I used Nearest Neighbour test to prove it. However, I've ...
3
votes
1answer
119 views

Statistic for measuring (local) autocorrelation of ordinal data

I have a spatial data set with a bunch of variables in nine-level ordinal scale. I want to calculate (local) spatial autocorrelation for each of these ordinal scale variables. I've been using ...
2
votes
0answers
42 views

How to cluster interconnected lines in Python without PostGIS?

I'm working with a subset of data from OpenStreetMap, where I have these island-like groups of line features. The groups are not connected to one another, but the lines are all interconnected within ...
-2
votes
1answer
82 views

Clustering large number of locations

I am trying to cluster points inside the USA for which I have the latitude and the longitude. My condition is that, every point within a cluster should be less than 25 miles away from every other ...
1
vote
0answers
112 views

Defining Parameters using Spatially Constrained Multivariate Clustering of ArcGIS Pro

I have a point shapefile with 51673 features. I am trying to cluster them using the Spatially Constrained Multivariate Clustering tool in ArcGIS Pro. After reading through the documentation, I'm ...
0
votes
1answer
49 views

Cluster analysis based on both location and attribute (seconds)? [closed]

I'm looking to create clusters both on spatial density, as well as an attribute (time, in seconds). Essentially, I am trying to figure out what areas are choke points in terms of time spent at certain ...
1
vote
1answer
53 views

Create point clusters based on grid

I am trying to make a systematic cluster sampling pattern for data collection. The sampling consist of the points placed over the landscape in 6 km span (red). From this major point, I need to create ...
1
vote
1answer
410 views

Clustering spatial lines in R by direction

There are tens of ways to cluster spatial points in R but I couldn't find any for spatial lines. What I would like to get is the average trajectory directions that each of these cyclones (spatial ...
2
votes
1answer
91 views

Applying QGIS point cluster exception

I have applied a point clustering effect on a layer in QGIS. What I'd like to be able to do is cluster on all features except the ones that I have a NULL value in an attribute. I can Categorize on ...
1
vote
1answer
89 views

Create fake clustered raster data in ArcGIS [closed]

I'd like to create several polygon grids with fake species occurrence (see example image) where each grid cell has a random value between 0 and 5 but high and low values cluster in certain areas as ...
3
votes
1answer
99 views

Clustering geometry points, return a point's label if the point does not belong to a cluster?

I am clustering geometry points using the k-mean algorithm. The result is a list of clusters. Some clusters contain multiple points. Others only contain a single point. On the client side, we would ...
2
votes
1answer
179 views

Fixing colors of LISA Cluster maps from Pysal?

I am using the LISA Cluster package from Pysal to create a LISA (Local Indicator of Spatial Autocorrelation) map. As the example of the documentation shows, the color lightblue is used to identify ...
1
vote
1answer
90 views

Calculating Moran's I for buffers of forest cover?

I'm trying to figure out if buffers I have created in ArcMap (measuring percent forest cover in a 1 km distance from a land use map within the buffer) around points at which I will be collecting ...
1
vote
2answers
414 views

Problems with ST_ClusterDBSCAN cluster sizes

I want to cluster all villages (and towns, ...) around the world. So instead of having millions of them, I'd like to reduce them by combining villages that are close enough (like 10km or so) to each ...
6
votes
1answer
928 views

Creating Groups of points based on proximity in QGIS?

I have a dataset with around 900 points and I want to cluster them into groups of 44 based on proximity. Is this possible in QGIS? I have tried to use the convex hull tool with no success.
1
vote
0answers
309 views

Is there an equivalent to “Build Balanced Zones” from ArcGIS Pro in QGIS?

"Build Balances Zones" was introduced in ArcGIS Pro 2.4 and allows a kind of spatial clustering with the help of genetic growth algorithm: The Build Balanced Zones tool uses a genetic algorithm to ...
3
votes
0answers
786 views

PostGIS - Dynamic Server-Side Clustering based on Zoom level

I'm working on a Ruby on Rails application that is showing road signs on the map(leaflet). So, user can browse map and road signs, great. But, if there are a lot of signs and user wants to zoom out, ...
3
votes
1answer
98 views

Get the probable right location from multiple points

I have a location collection tool which send me location data of our survey. Surveyors send multiple data of a single item. Such as they send numarous data for a school like the following image. From ...
0
votes
1answer
167 views

Spatially constrained multivariate clustering in ArcPy gives AttributeError?

i want to use the Spatially constrained multivariate clustering tool for a point shapefile. I'm using PyScripter. The shapefile is named "LITO2016_area_modelli_20190312_v2" and the attribute fields i ...
1
vote
1answer
156 views

Creating clusters based on attribute and proximity [duplicate]

In my map as you see below, I have my population by district. I want to create 50 clusters with similiar sums of the population and by proximity. How I can achieve this? For each cluster, I want the ...
0
votes
0answers
48 views

Point patterns clustering around reference points?

I have two point shapefiles. I want to analyse whether the points in the dataset A are clustering around their respective reference point in the dataset B. Each reference point in the dataset B has a ...
3
votes
1answer
94 views

How to UPDATE a column with cluster IDs in PostGIS?

I have a table with points in it, and I want to cluster them. I had created a separate table to hold the clusters, but I ended up copying all the data from the original table into the new cluster ...
3
votes
0answers
73 views

Clustering based on eqaul populations

I have a map of a city that is divided into 65 sectors (building lots in purple, sector boundaries in red): In my shapefile of building lots, I have an attribute that is the total population within ...
1
vote
1answer
240 views

Cluster geometries that touch each other

I'm trying to cluster the geometries in a sf object that touch each other. For the moment I'm using the same approach that it's explained in the answer here, but the problem is that the same idea ...
2
votes
1answer
691 views

Clustering spatially connected polygons so all clusters have approximately the same size

I want to group together polygons from a shapefile a way that all the clusters formed contained approximately the same number of polygons. The problem is that the source polygons have vastly ...
0
votes
1answer
148 views

Combining points close to one another

I need an approach to combine points close one to another into a common point. I can take an average of points' {lat, long} to create one point. How I can do this with ArcMap or Python? I have an ...
11
votes
1answer
2k views

Raster clustering using QGIS

I'm looking for a way to convert a classified raster into polygons based on spatial clusters within each class. For the clusters to be considered as valid I need them to consist of a minimum ...
0
votes
1answer
796 views

ST_ClusterDBSCAN in PostGIS gives me 0 for the cluster ID

I am trying to cluster latitudes and longitudes from a dataset containing locations in Germany (n=52612, about 9000 without duplicates). I am running the DBSCAN algorithm, but for none of the ...
1
vote
0answers
191 views

Cluster LineStrings using HDBSCAN?

I am trying to cluster a set of LineStrings (made out of lat/lon Points) with the help of HDBSCAN (using the "haversine" metric). The objective is to define the most "usual" path. I have only managed ...
1
vote
0answers
481 views

Algorithm to cluster coordinates within a maximum radius [closed]

I am looking for an algorithm that will allow me to find the centers of clusters of an arbitrary radius, such that all coordinates are covered. Currently, I am doing a very basic routine where I ...